Motorcycle parts
Yamaha XV 1100 - Page 8

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2023-01-20, 09:45

View original

Jacek

Hi, I bought a shock seal protector for a 1989 Yamaha Vmax and they fit perfectly. Hassle-free installation, I recommend replacement when replacing the seals and pan. Regards. Jacek

Review translated automatically

Reliable opinion

2022-05-25, 17:54

View original

ADAM

Yamacha Drag Star 1100 gasket only a few zlotys and does the job, nothing sweats. Replacement 10 minutes.

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2019-04-13, 21:13

View original

Mariusz

I am a very satisfied owner of a 1995Yamaha XJ 900 Diversion motorcycle.The vehicle is absolutely trouble-free but due to its age, the swingarm bearings had to be replaced.I purchased a set of Tourmax bearings.The bearings and the simmering rings supplied in the set matched perfectly which made the replacement a pleasure.Now my equipment rides like new again.I would recommend this set to anyone who has a similar fault to eliminate in their equipment.If all the parts were made with such accuracy, I could boldly become a mechanic ;)

Review translated automatically

Reliable opinion

2021-02-07, 13:06

View original

RDS

In both motorcycle and cars I have tested different brands of spark plugs. So far I have had no problems only with NGK. The model tested by me for several seasons (Yamaha motorcycle). I have never had a situation of running out of spark. Starting trouble-free at any temperature, but it is important to have a well-charged battery.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2020-11-01, 15:11

View original

Paweł

Yamaha Virago 1100 The purchased pipe looks solid. Previously installed pipe from this company works fine albeit the rubber securing the wire has cracked.I will replace with a new NGK purchase and see how it will be with the durability of the rubber parts as well as the entire component.

Review translated automatically

Reliable opinion

2021-08-11, 08:17

View original

Boszu

Valves of good quality, fit seamlessly into the Yamaha Thunderace 1000. The only minor insignificant difference, the wire at the top of the valve does not fully close only is such a letter "L". But this does not interfere with anything. After installation it works elegantly. :)

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2018-09-07, 08:01

View original

Piotr

Yamaha Virago XV 750 1995 product as described and with photos after installation moto works very evenly and stable. Professional help in the selection of goods. Fast shipping. I recommend

Review translated automatically

Reliable opinion

2020-11-02, 14:37

View original

Tomasz

Yamaha xj 600 n 96r lag seal protector plus gaskets the product meets my expectations the shipment arrived quickly I recommend the products as well as the company g moto

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2020-12-08, 10:36

View original

Maciej

Sealers fit Rieju MRX 50 PRO with Paioli lags, they are of high quality and fit perfectly, after putting them on, no slightest sweating on the lag. I recommend

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Review translated automatically

Reliable opinion

2020-03-15, 21:27

View original

Tomasz

Recommended. Fires from the shot:). previously had problems:( drag star 1100:) judging the product 100% original:D. Concrete company concrete product:)

Review translated automatically

Reliable opinion

2023-07-21, 05:15

View original

Grzegorz

Product 100% as described, workmanship at the highest level. Purchased part for Piaggio MP3 300 YOUrban LT ERL. Highly recommend

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2023-09-11, 05:32

View original

Aleksei

Good product, fast delivery. Correct and very operative service. Plenty of payment options, including invoice to a legal entity.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2016-08-29, 16:48

View original

Wiesław

Motorcycle yamaha virago 1100 and 535 and I return to these plugs for 3 years , I do not change , because why replace what is good.

Review translated automatically

Reliable opinion

2021-07-12, 09:31

View original

Łukasz

Yamaha SR500, 1989 Candles what they are, everyone can see. Each piece is well protected from damage in transit.

Review translated automatically

Reliable opinion

2019-03-10, 17:25

View original

Grzegorz

Yamaha FZR 600 genesis 1990r Nice set of sealers, well matched to the model. The set as much as possible on the plus side.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2021-11-12, 11:45

View original

Marek

Product as described. I have been buying parts on gmoto for a long time and the parts always match the order.

Review translated automatically

Reliable opinion

2018-04-06, 08:32

View original

Krzysztof

Yamaha Virago 750 Year: 1995 Front wheel bearings replaced - motorcycle rides - SUPER - recommend greetings

Review translated automatically

Reliable opinion

2024-10-14, 16:57

View original

Marcin

Bearings of very good quality I order for the next timeideally fit the model selected in the search engine Gmoto.

Review translated automatically

Reliable opinion

2018-07-03, 20:29

View original

Krzysztof

Yamaha xj900 S - everything OK !!! Zero problems. I highly recommend.Installation of the item went without a problem.

Review translated automatically

Reliable opinion

2021-10-05, 11:01

View original

Krzysztof

Everything fits perfectly. I recommend sincerely. More about the security wire can not be written.

Review translated automatically

Reliable opinion

2018-04-06, 08:31

View original

Krzysztof

Yamaha Virago 750 Year: 1995 A very good buy after the change the engine burns evenly with no interference regards

Review translated automatically

Reliable opinion

2020-08-24, 10:23

View original

Tomasz

I recommend these NGK candles as always the best,contrary to opinions I don't recommend iridium candles only the usual NGK ones

Review translated automatically

Reliable opinion

2023-05-27, 11:13

View original

Artur

Suspension sealers do their job, the lags have stopped leaking and the motorcycle is back on the roads.

Review translated automatically

Reliable opinion

2019-04-06, 12:00

View original

Tomasz

Very fast shipping parts fit perfectly everything needed for the motorcycle can be found I recommend

Review translated automatically

Reliable opinion

2015-11-21, 18:04

View original

Łukasz

Perfect replacement copper gasket for KX 250 '98. recommend in good conscience :)

Review translated automatically

Reliable opinion

2021-07-14, 14:46

View original

Tomasz

Perfect fit. Good workmanship for little money.

Review translated automatically

Reliable opinion