Motorcycle parts
Yamaha XVZ 1300 ATHC Royal Star Tour Classic 1998

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-04-12, 13:22

View original

Piotr

The product perfectly replaces the original part, after replacement the pump is tight. For this operation, it is worth buying a gasket and oring.

Review translated automatically

Reliable opinion

2023-06-17, 17:45

View original

Piotr

Among the many offers, I decided to buy a great quality replacement. First of all, the product is made in Japan. I was concerned about the quality of the product. The purchased relay works perfectly in my motorcycle. If you own a Road Star, this part is a great fit. The workmanship quality is perfect. Everything airtight. Aesthetics of workmanship for a rating of 5. Above all, functionality in its range of operation. The price is very affordable. I recommend if you have a problem with an old relay.

Review translated automatically

Reliable opinion

2025-06-19, 22:09

View original

Romuald

parts in conformity with my expectations (clutch receiver repair kit) with a very correct delivery time the product is of good quality and the assembly clean with the origin I highly recommend this site, which is very clear and communicates well about the product. what's more, the drivers are friendly and smiling ( DPD ) I wouldn't hesitate to order again at a later date for my machines that I look after ( they are over 20 years old ) Mr Gernez R

Review translated automatically

Reliable opinion

2017-08-29, 11:16

View original

Łukasz

I own a hyosung RT motorcycle its capacity is 125cm.It comes from the year 2008.It seemed to me that the product I bought (faucet repair kit) will perfectly fit my motorcycle.But unfortunately the thin o-ring sealing the faucet swelled and bent in the faucet making the faucet work very hard.At first the o-ring fit very well until it got gasoline.The kit very beaver despite this one o-ring except for it everything fit perfectly.

Review translated automatically

Reliable opinion

2016-09-09, 10:49

View original

Rafał

I bought this kit in the store with the information that it may not fit the cbr 250 but I made an aluminum ring on the wall 0.65mm height 0.80 mm circumference 30.00mm inner circumference 28.70 and it fits the rest of the dimensions is the same thank you for reliable information seller price in the service is 240 PLN and the ring cost me 10 PLN at a friend turner and everything is fine I recommend

Review translated automatically

Reliable opinion

2025-09-24, 16:45

View original

Romuald

Product in conformity with my request with a delivery time ultra fast and protected with handing-over in person and signature I recommend without hesitating Gmoto for the spare parts it is the second time that I order the kit of repair for my 2 motor bikes and I am satisfied with quality and the delivery you can go there without hesitating.

Review translated automatically

Reliable opinion

2020-12-26, 08:14

View original

Oleksandr

My motorcycle is a Yamaha XJR 1300, and I ordered a Tourmax clutch actuator repair kit from the Gmoto store. Quality of materials good. I have ordered parts for my motorcycle from this store and before. I am always satisfied: fast service and well-packed fast delivery. All questions are answered quickly and gladly. I recommend.

Review translated automatically

Reliable opinion

2025-02-25, 19:31

View original

Peksi

Perfectly fitting needle valve for Yamaha Royal Star vm - 96. Had matching diameter petrol holes. I bought needle valves from another online store earlier that had holes that were too small. The fit was incorrectly stated on the product. Now the petrol surfaces stay aligned when the correct spares are used.

Review translated automatically

Reliable opinion

2021-08-11, 08:17

View original

Boszu

Valves of good quality, fit seamlessly into the Yamaha Thunderace 1000. The only minor insignificant difference, the wire at the top of the valve does not fully close only is such a letter "L". But this does not interfere with anything. After installation it works elegantly. :)

Review translated automatically

Reliable opinion

2022-01-26, 10:54

View original

Złaku

The gaskets look very good. When servicing the carburetor, I suggest you still buy the nozzle o-rings and the mixture screws. Motorcycle xj600n. 6x1.5 - Float valve seat o-ring 2,5x1 - Main jet o-ring 3x1 - Pilot screw o-ring

Review translated automatically

Reliable opinion

2021-11-08, 16:16

View original

Kamilla

Yamaha Virago 1100 year 1996 Product as ordered. In the original box. Assembly without adventures. Everything fit. Parameters of the device in accordance with the manufacturer of the motorcycle.

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2023-07-28, 07:41

View original

Adam

Parts ok . Installed in Yamaha XT 660 X. However, it is also worth replacing the oil sealer which is not included in the set. Customer service super and shipping lightning fast.

Review translated automatically

Reliable opinion

2024-05-04, 03:42

View original

Krzysztof

The product fits my 2005 Suzuki GSF 1200S motorcycle perfectly. It looks solid. I hope it will be durable and last a long time. Overall I recommend.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2025-05-08, 15:14

View original

lespilette

top received on time, perfect service, well packaged, no problem for transport.....good quality product for my Xjr, same as in France

Review translated automatically

Reliable opinion

2024-08-05, 05:26

View original

Marcin

The set as described . Technical parameters fit Drag Star 1100 99r. Assembly quick and easy. I recommend . Good quality product

Review translated automatically

Reliable opinion

2020-05-09, 06:18

View original

Marek

Yamaha XV 1100, year 1996, the sensor did its job and the installation process went smoothly, my XV regained its former efficiency

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2020-12-13, 09:20

View original

Kamil

Goods as described. Repair kit of very good quality. The problem with the leaking cracker has been solved. I recommend.

Review translated automatically

Reliable opinion

2024-08-25, 12:23

View original

Dawid

There is everything you need the manufacturer even took care of such details as screws which is a super gesture because it is rare

Review translated automatically

Reliable opinion

2024-11-05, 06:54

View original

Marcel

I was losing a lot of oil from the bottles, it has arrived well, still to be assembled. let's pray that it goes well for my suspensions.

Review translated automatically

Reliable opinion

2024-11-07, 08:28

View original

Furui

Delivered as ordered. Everything in order. I would order from GMoto again. It is a reliable supplier.

Review translated automatically

Reliable opinion

2021-11-12, 11:45

View original

Marek

Product as described. I have been buying parts on gmoto for a long time and the parts always match the order.

Review translated automatically

Reliable opinion

2025-06-12, 18:46

View original

Slobodan

Everything ok, great parts, super cheap, cheap shipping, always gladly again. Shipping takes a bit long but ok.

Review translated automatically

Reliable opinion

2019-07-15, 14:02

View original

Daniel

Yamaha yz426f 2001. The product is of very good quality and fulfills its purpose 100% . I recommend the product as well as the store .

Review translated automatically

Reliable opinion

2019-08-31, 08:56

View original

Tomasz

The installation went without any problems, a perfect fit of the caps and sealers in the Triumph Speed Triple 1050.

Review translated automatically

Reliable opinion

2024-08-25, 10:44

View original

Dawid Telega

Super repair kit is everything you need the quality of workmanship is also super, included screws, etc,

Review translated automatically

Reliable opinion

2021-08-03, 07:45

View original

Krzysztof

Suzuki GSXR 600 k4 2004. Fit and quality at a very high level. I recommend 100 percent.

Review translated automatically

Reliable opinion

2019-04-14, 08:49

View original

jacek

Very good quality. Fast delivery. This is the umpteenth purchase from this store and as usual everything is ok.

Review translated automatically

Reliable opinion

2025-03-17, 16:29

View original

Tauri

A very good kit and easy to install. The shipment arrived in five days and I am happy with my purchase.

Review translated automatically

Reliable opinion

2020-05-23, 20:56

View original

Stanisław

The product made of high quality materials fits perfectly and looks aesthetically pleasing.I sincerely recommend.

Review translated automatically

Reliable opinion

2020-04-11, 08:46

View original

Bartosz

Yamaha TZR 125 4FL. The installation went quickly and without problems. Nothing leaks anymore, highly recommend.

Review translated automatically

Reliable opinion

2019-10-12, 18:59

View original

Jacek

Clutch actuator repair kit fits 1999 XJR 1300SP, workmanship at a very good level.

Review translated automatically

Reliable opinion

2019-03-17, 21:17

View original

Jacek

YAMAHA XJR1300SP vintage 1999, all parts fit perfectly (to the eye does not differ from the original).

Review translated automatically

Reliable opinion

2022-01-27, 18:52

View original

Michał

Yamaha XJR 1300; Hassle-free purchase, delivery, installation. As always a big +. I recommend the store and the product.

Review translated automatically

Reliable opinion

2022-08-02, 22:28

View original

Andrzej

I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.

Review translated automatically

Reliable opinion