Motorcycle parts
Yamaha XVZ 1300 - Page 8

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-04-12, 13:22

View original

Piotr

The product perfectly replaces the original part, after replacement the pump is tight. For this operation, it is worth buying a gasket and oring.

Review translated automatically

Reliable opinion

2024-06-07, 16:34

View original

Kazimierz

Top-shelf goods, matched to the recommendations of the vehicle manufacturer. Packaging clear and matched to the product, is OK.

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2023-06-17, 17:45

View original

Piotr

Among the many offers, I decided to buy a great quality replacement. First of all, the product is made in Japan. I was concerned about the quality of the product. The purchased relay works perfectly in my motorcycle. If you own a Road Star, this part is a great fit. The workmanship quality is perfect. Everything airtight. Aesthetics of workmanship for a rating of 5. Above all, functionality in its range of operation. The price is very affordable. I recommend if you have a problem with an old relay.

Review translated automatically

Reliable opinion

2017-08-29, 11:16

View original

Łukasz

I own a hyosung RT motorcycle its capacity is 125cm.It comes from the year 2008.It seemed to me that the product I bought (faucet repair kit) will perfectly fit my motorcycle.But unfortunately the thin o-ring sealing the faucet swelled and bent in the faucet making the faucet work very hard.At first the o-ring fit very well until it got gasoline.The kit very beaver despite this one o-ring except for it everything fit perfectly.

Review translated automatically

Reliable opinion

2016-09-09, 10:49

View original

Rafał

I bought this kit in the store with the information that it may not fit the cbr 250 but I made an aluminum ring on the wall 0.65mm height 0.80 mm circumference 30.00mm inner circumference 28.70 and it fits the rest of the dimensions is the same thank you for reliable information seller price in the service is 240 PLN and the ring cost me 10 PLN at a friend turner and everything is fine I recommend

Review translated automatically

Reliable opinion

2021-08-11, 08:17

View original

Boszu

Valves of good quality, fit seamlessly into the Yamaha Thunderace 1000. The only minor insignificant difference, the wire at the top of the valve does not fully close only is such a letter "L". But this does not interfere with anything. After installation it works elegantly. :)

Review translated automatically

Reliable opinion

2021-09-01, 16:14

View original

Maciej

Suzuki VS 1400 2001 CANDLES as you know are the foundation. I would write that the motorcycle now works wonderfully and almost no fuel consumption, but there is not a shred of truth in this. The spark plugs are good, that's why I bought them. I can recommend.

Review translated automatically

Reliable opinion

2020-09-20, 14:21

View original

Rafał

Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.

Review translated automatically

Reliable opinion

2024-06-24, 16:40

View original

Daniel

NGK has never failed me - it lasts quietly for 20 thousand kilometers, does not catch punctures, does not leak, the thread fits perfectly and does not crumble when unscrewed like, for example, some iridiums.

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2022-07-23, 13:57

View original

Wiktor

Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO

Review translated automatically

Reliable opinion

2020-11-17, 12:27

View original

Mateusz

As it is Athena seals are doing a cool job, 0 leaks so far, every moto of mine so far has just had Athena seals/rings and it has always been git.

Review translated automatically

Reliable opinion

2023-07-28, 07:41

View original

Adam

Parts ok . Installed in Yamaha XT 660 X. However, it is also worth replacing the oil sealer which is not included in the set. Customer service super and shipping lightning fast.

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2020-04-24, 12:12

View original

Cezary

Honda pantheon 250, 2000r, installation very easy. Good quality plugs and good price. Fast shipping by Gmoto, I will definitely be ordering the parts I need from them.

Review translated automatically

Reliable opinion

2019-07-07, 20:55

View original

Bartłomiej

Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Review translated automatically

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Review translated automatically

Reliable opinion

2021-04-06, 09:16

View original

Bartłomiej

2014 Honda CRF 250 M Worn with oil to make it go in easier. They fit well, the suspension does not leak. At the next change I will also choose them.

Review translated automatically

Reliable opinion

2018-01-09, 18:22

View original

Andrzej

Yamaha xvz 1200 84r. Purchased part with good quality material, well matched to the motorcycle engine components. The installation went well.

Review translated automatically

Reliable opinion

2020-05-04, 08:54

View original

JANEK

Hello, the product solidly made, very high quality, fit me perfectly in the motorcycle!, the other such quality you will not find

Review translated automatically

Reliable opinion

2017-05-29, 15:04

View original

Piotr

Honda Transalp 600v,1997r pd 10. candles dedicated to this model, reliable,great workmanship and quality at an attractive price. I recommend

Review translated automatically

Reliable opinion

2024-08-05, 05:26

View original

Marcin

The set as described . Technical parameters fit Drag Star 1100 99r. Assembly quick and easy. I recommend . Good quality product

Review translated automatically

Reliable opinion

2018-02-26, 20:13

View original

Kazimierz

I own a motorcycle yamaha XVZ ROYAL STAR 1300 of 98 I purchased braided brake lines the product meets my expectations 100%

Review translated automatically

Reliable opinion

2018-11-18, 16:55

View original

Marek

Honda Shadow VT 500 1983. Product fit 100% recommend. Professional service, fast shipping. Very competitive prices.

Review translated automatically

Reliable opinion

2024-08-08, 14:04

View original

Bartłomiej

When it comes to spark plugs, only and exclusively NGK company. Great quality and long life. Candle fits suzuki gs500/gs500f/e

Review translated automatically

Reliable opinion

2020-12-25, 12:20

View original

Marek

Despite the pre-Christmas period, the shipment arrived very quickly. As for the quality of the sealers, I can write an opinion in a year.

Review translated automatically

Reliable opinion

2020-12-13, 09:20

View original

Kamil

Goods as described. Repair kit of very good quality. The problem with the leaking cracker has been solved. I recommend.

Review translated automatically

Reliable opinion

2018-08-21, 17:39

View original

Tomasz

Honda vt 500 year 1983 very good candles I recommend the store I do my parts shopping there and there have never been any problems greetings

Review translated automatically

Reliable opinion

2019-11-02, 18:19

View original

Tomasz

Yamaha xt 600 e 1991 3tb. These candles do not disappoint. Without a doubt they are worth the price and I recommend them with a clear conscience.

Review translated automatically

Reliable opinion

2024-08-25, 12:23

View original

Dawid

There is everything you need the manufacturer even took care of such details as screws which is a super gesture because it is rare

Review translated automatically

Reliable opinion

2024-08-06, 05:02

View original

Wojciech

Candle very good. No problems in firing up the intruder 1400 motorcycle.As for this price very good choice.

Review translated automatically

Reliable opinion

2020-02-25, 06:52

View original

Maciej

Great quality workmanship I recommend muj motorcycle runs on this candle very well and does not am problems with its firing

Review translated automatically

Reliable opinion

2020-11-07, 21:27

View original

Robert

Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.

Review translated automatically

Reliable opinion