Motorcycle parts
Yamaha YZF-R6 600 - Page 19

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-06-03, 11:54

View original

Adrian

Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.

Review translated automatically

Reliable opinion

2021-02-16, 11:19

View original

Oleksandr

I have a Yamaha XJR 1300 motorcycle and needed sealers and hoods for the lags. The hoods in the front suspension were still original and I just wanted the look to stay the same. Because of this and I bought this kit. And plus it turned out to be a good quality product. Hoods and sealers quite flexible and fit perfectly in their places. I am very satisfied. I recommend.

Review translated automatically

Reliable opinion

2018-01-16, 19:39

View original

Robert

My motorcycle is a 97r. Yamaha Thunderace I ordered a repair set of rear shock mount because my bearing blew out after all it's 20 years.The new one is now built in,it fits perfectly seals too,the bushing has no side play,looks like the original I'm satisfied.

Review translated automatically

Reliable opinion

2020-05-06, 08:38

View original

Hubert

Kit super, the old parts in the motorcycle looked ok to the eye, but however, when I compared with this kit I noticed that the old orings were already shrunken and did not hold the dimensions. Handle now firm and brakes much better :) I recommend

Review translated automatically

Reliable opinion

2021-02-09, 10:48

View original

Marcin

Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.

Review translated automatically

Reliable opinion

2020-09-20, 14:21

View original

Rafał

Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.

Review translated automatically

Reliable opinion

2023-12-30, 08:43

View original

Marcin

The part is of very good quality, comparable to the original, everything fits as it should, works flawlessly, you can confidently drive a few seasons without looking, doing an average of up to 10,000 km per season

Review translated automatically

Reliable opinion

2022-01-27, 10:50

View original

Sławomir

The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.

Review translated automatically

Reliable opinion

2019-12-24, 07:54

View original

Robert

VARADERO XL 1000 SD01 99r. Very good quality fuel pump repair kit. The installation went without any problems. Very good fit of the parts. I recommend the manufacturer and seller.

Review translated automatically

Reliable opinion

2022-07-23, 13:57

View original

Wiktor

Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2019-07-07, 20:55

View original

Bartłomiej

Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Review translated automatically

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Review translated automatically

Reliable opinion

2020-11-07, 21:27

View original

Robert

Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.

Review translated automatically

Reliable opinion

2017-06-04, 18:47

View original

Radosław

Kawasaki ER 5 1996 year, the valve as factory, performs its function. You can see that it is of very good quality. I recommend

Review translated automatically

Reliable opinion

2023-07-04, 20:40

View original

Tomasz

Super service I got what I ordered in a very short time. Wish all companies were so honest. Greetings

Review translated automatically

Reliable opinion

2019-07-18, 09:30

View original

Adrian

The pin fits perfectly on the Suzuki DL650. The workmanship quality is very good. The plastic does not break or crack. I recommend

Review translated automatically

Reliable opinion

2024-08-25, 12:33

View original

Dawid

Arbor as much as ok, fits everything without any problem is durable does not wear out quickly good quality

Review translated automatically

Reliable opinion

2018-12-22, 10:27

View original

Marcin

The valve visually identical to the original. Well packaged. Whether it does its job we will see after installation

Review translated automatically

Reliable opinion

2017-04-07, 10:45

View original

Bartłomiej

Kawasaki Z750 vintage 2011 seals very good. Perfectly fitted, do not let go of oil. I recommend :)

Review translated automatically

Reliable opinion

2018-03-19, 09:36

View original

Bartosz

The pin fits the body parts of Suzuki Dl 650 motorcycle year 2011, Fast shipping, available price. I recommend

Review translated automatically

Reliable opinion

2022-06-08, 11:00

View original

Grzegorz

Very nice pegs you can see that they are not made of just anything so I put them on without any problem they look like the original ones

Review translated automatically

Reliable opinion

2021-07-18, 10:28

View original

ZBIGNIEW

Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.

Review translated automatically

Reliable opinion

2021-07-18, 10:28

View original

ZBIGNIEW

Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.

Review translated automatically

Reliable opinion

2018-02-17, 19:19

View original

Maciej

Sealers really well made , fit very well . The installation went smoothly and quickly

Review translated automatically

Reliable opinion

2020-01-28, 22:08

View original

Kamil

It fits perfectly on a 2003 Suzuki RM 125. I installed and can continue to ride off-road. Thanks a lot :)

Review translated automatically

Reliable opinion

2018-03-05, 19:36

View original

Dariusz

Yamaha Drag Star 1100 2007 year super stuff recommend !!!!!!!!!!!!!!!!

Review translated automatically

Reliable opinion

2019-05-29, 16:33

View original

Wiktor

Quick to install simple to use Made of durable plastic

Review translated automatically

Reliable opinion

2015-10-20, 18:53

View original

Grzegorz

So far, the product meets my expectations.

Review translated automatically

Reliable opinion

2016-03-02, 02:45

View original

Sławomir

Yamaha XTZ 660 Tenere 3yf,1994

Review translated automatically

Reliable opinion

2016-12-02, 12:59

View original

Marcin

dl-650 v-strom - fits ok.

Review translated automatically

Reliable opinion