Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Zipp Pro 50 4T
Browse by manufacturer
Products reviews
Zumico GR200. The engine fits perfectly, I had no problems in mounting it to the frame. The engine runs perfectly, smokes from a shot. Fast delivery. Recommended.
Review translated automatically
Reliable opinion
The safety device does its job . Fits perfectly to the sprocket . I recommend !!! (Benzer Texsas 50)
Review translated automatically
Reliable opinion
Engine received quickly, there was a lot of oil in the box but that's because of the carrier, otherwise the engine is great, I mounted it on my masai greystone 50 and it's really plug and play, you just have to connect the cables. On the other hand, the double-branch gear selector doesn't fit on the masai greystone and neither does the kick, so I kept the ones on the original engine, but otherwise everything fits perfectly. I'm really satisfied with the engine and with Gmoto! I highly recommend it!
Review translated automatically
Reliable opinion
Howdy.I purchased a 11 tooth front sprocket from gmoto.I was surprised that I only paid 10 zloty for this product as it is from a decent company.I own a street 50 moped and there were no problems with the sprocket.It fits perfectly on a 428 120 link chain.According to me,the power seems to have increased a bit but the v max has decreased.If we try a bit harder and shoot the clutch we will be able to ride on 1 wheel.I warmly and sincerely salute g moto for their excellent and quality products.
Review translated automatically
Reliable opinion
The cooler looks to be of good quality. The only downside is that I'd have liked several types of fasteners, because I'm not sure the two metal lugs will hold up over time. They look like cheap aluminum. And there's no silent block supplied to dampen vibrations a little for the radiator. After that, I'm a handyman, so no worries for me. Assembled in half an hour. Would recommend.
Review translated automatically
Reliable opinion
very fast delivery was pleasantly surprised . To the product looks very good exactly as described . Was of the opinion the motor is produced in Taiwan . This is not so product in China. Well look ma times . Will install the engine in a KIKKER 5150 . the current one with the semi-automatic is not my taste . hopefully it has the power of 12 hp as stated in the description .
Review translated automatically
Reliable opinion
I own a cross with a 152fmh Loncin 110 engine I needed to protect the sprocket this protection fits perfectly it is well made, the holes are the right distance and the right diameter. The milling inside is well fitted so there is no play. The protection is thick which stiffens the mount. I recommend because the product is of good quality.
Review translated automatically
Reliable opinion
Quad ATV 110, I do not know from which year but somewhere around 2003-2007 Very good quality product everything fit like the original, there were no problems with installation. After installation the starter finally worked ;) Sorry but I did not take pictures :( I did not have time to do so because the children already wanted to ride the quad
Review translated automatically
Reliable opinion
Now my starter is working properly I bought this because I ran out of brushes and I often use the starter through an electric starter to start the engine, as for the price it is worth it and as for the difficulty of assembly I rate 5 stars for a layman in my opinion it is trivial but, as you know, it happens differently Greetings :D
Review translated automatically
Reliable opinion
Mám junak 902 chopper rok 2021 o pojemnosti 50 ccm wsedlem na gmoto wiszukal gaznik z dopasowanie do mojej stroje . Unfortunately gaznik tak dopasowany zie wse treba prerabiet from the gas line to the filter tím prosek o zmiany w dopasowanie na czensti Bo to niepasuje produkt chinsky bez jakosti dopraczowania
Review translated automatically
Reliable opinion
The quality makes a very good impression. Shipping was very fast and everything I ordered was securely packed. Really helpful for installation and removal. For me, 1000 times better for the price than sending the nut off with the hammer and driver.
Review translated automatically
Reliable opinion
I own a 2020 Apollo Avenger 125 Quad the sprocket was easy to install and I think it is made of durable material. It looks pretty good for the price, and fits like a glove. The 12 teeth fit perfectly, the chain is not too tight and the quad has better performance.
Review translated automatically
Reliable opinion
Moped - Barton Fighter Eco 2020 This is not an oring for 139FMB !!! Too small in diameter and too thin. 139FMB has an ebonite washer with a passage diameter of 20.5 mm. This oring, on the other hand, fits a different washer, with a passage diameter of 17 mm.
Review translated automatically
Reliable opinion
So yes the sprocket I ordered is a very good fit for the Honda 450 and very nice to ride however ze first 2 days it was not nice to ride because the sprocket was popping off the shaft but on the 3rd day of riding it is fine I give 5.
Review translated automatically
Reliable opinion
All about. Assembly without complaint, but I chose a low-compatible part. My fault. Greetings. The regulator is oki,but it gives very high current. It is about 26.v. I suspect the stator. Goods as described and from your side everything on 5!!!
Review translated automatically
Reliable opinion
I own a Router WS 50 I installed this sprocket in 15minutes and I highly recommend it looks very nice and durable I highly recommend the sprocket has already traveled about 500km and shows no signs of use. I recommend
Review translated automatically
Reliable opinion
After ordering the product, I did not expect to get it earlier than it was described, I got the product 1 earlier than the scheduled delivery, the product well protected in the shipment, it works flawlessly :)
Review translated automatically
Reliable opinion
The wrench fitted to the clutch nut easily unscrewed and also tightened the clutch a plus is that it has two sizes for the nuts and also that it even fits most "ratchet" wrenches without problems
Review translated automatically
Reliable opinion
You make good I am satisfied with the product I ordered I will order it again when I need it but with my usage it will be needed and more than once I heartily recommend this product
Review translated automatically
Reliable opinion
Kinroad Chopper XT50Q. Description of the product consistent with super quality,descriptive attachment of the installation and explained connection. Fits BMW - Piaggio 125cc. Shipment on time. I recommend everyone to shop at www.gmoto.pl
Review translated automatically
Reliable opinion
A very useful tool. It is better to buy such a wrench than to play with self-made ones. Such a wrench is cheap and very convenient and you do not need some super tools, just an ordinary socket wrench (ratchet).
Review translated automatically
Reliable opinion
Very good material that really cools the engine even at full throttle! I really recommend it for people who have engine overheating problems or who want to upgrade to a 72cc kit.
Review translated automatically
Reliable opinion
Very good, cools well and looks nice connected to the motorcycle. The only problem is the gasket given in the kit, which is shoddy you have to buy additional better ones: Barton FR50
Review translated automatically
Reliable opinion
Recommended product, everything is in accordance with the description as well as with the photo, quality at a very good level, the tool fits without any problem, aesthetics of workmanship at a very good level.
Review translated automatically
Reliable opinion
The part fits perfectly. Easy to install and works perfectly. I am very satisfied with the oil cooler. I can absolutely recommend retrofitting the part.
Review translated automatically
Reliable opinion
Fits Kingway naked 50 and similar. Very easy installation just unscrew the starter housing, no need to disassemble the engine. Very good quality. I recommend the store as well as the part.
Review translated automatically
Reliable opinion
I recommend ✌️pasuje for Honda MB 80 1980 installation mileage very fast the sprocket as in the description is 12z you can see that it is made of durable material for this price I highly recommend it
Review translated automatically
Reliable opinion
The product is consistent with the original. Well packaged. Conforms to the description. On the other hand, no information about the fit to my motorcycle. Very good contact with the seller.
Review translated automatically
Reliable opinion
Great cooler works perfectly engine does not overheat you can push to the max, highly recommend, the best motorcycle parts store :)
Review translated automatically
Reliable opinion
Super article thanks for all person Fits great, I still ride it, thanks and for the fast delivery. Site is super good, everything is there
Review translated automatically
Reliable opinion
I own a yamasaki ym 50 motorcycle and the installation of the sprocket went very quickly. The sprocket is a very good product that I can heartily recommend.
Review translated automatically
Reliable opinion
Satisfaction with fast delivery, excellent and clear selection of goods. Spare part fits very accurate and works like new. gmoto recommend
Review translated automatically
Reliable opinion
Super replacement at a normal price fast delivery information about the order on a regular basis,only missing the option in the delivery of parcel kiosks
Review translated automatically
Reliable opinion
Perfect spare part and fast delivery A very good online store, very clear and well sorted
Review translated automatically
Reliable opinion
Quad magnus viper 70 top starter fits perfectly does not deviate from the original. Everything works as it should.
Review translated automatically
Reliable opinion
Fits 100 percent very good quality I can recommend it to others I have installed it on a Barton FR50
Review translated automatically
Reliable opinion
Quad 110, starter repair kit fits perfectly, works without complaint, material quality good.
Review translated automatically
Reliable opinion