Manufacturer
Price
Sort
€15.54
Lowest price from 30 days before discount: €16.36
NGK BR8HIX iridium spark plug - BR8HIX
€15.22
Lowest price from 30 days before discount: €16.02
NGK CR7HIX iridium spark plug - CR7HIX
Browse by manufacturer
Products reviews
2020-08-17, 08:33
Marian
CZ350, capacity 350 year of production 1986 Iridium spark plugs, which I purchased through the portal, completely changed the work cultore of the motorcycle. The equipment fires up from the so-called first kick, works nicely on two cylinders and the full power of the motorcycle returned. Now riding this old man gives fun. My next purchase will be iridium spark plugs. I recommend the store and recommend candles from this manufacturer.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-18, 22:05
Krzysztof
Greetings. I checked the iridium spark plug out of curiosity in all my models: Junak m10 from 1963, SHL 175 from 1966 , SHL Wiatr from 1967, WSK B1 1969, WSK Garbuska and in all of them runs very well. ultimately I left in the motorcycle Junak M10 because it does longer routes and it is intended to last longer. I recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-08, 08:37
Krzysztof
Greetings. WSK B1 from 1969 I have been through when it comes to spark plugs quite a few variations. And I confirm what the manual says it must be so! Plus good production quality NGK CR7HSA and the motorcycle runs well, trouble-free, smokes cold as well as warm, has adequate power, smoothness of driving. I recommend and greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-18, 22:08
Krzysztof
Greetings. I use such candles in all my models of motorcycles: Junak M10 SHL 175, SHL Wind, WSK B1. Tested and recommended. Works well in all winter or summer conditions. Has a fairly stable spark. Regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:23
Tomasz
The wrench is made of good quality materials. There is nothing to compare to the Chinese. The bolt, as for me, is good because I will not pull the candle too much, but if someone will have trouble unscrewing it can even put a screwdriver :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 18:51
Krzysztof
Hello cordially. such a candle I screw in the engine of a motorcycle SHL m11 of 1966 and 1967 (WIND) and Junak M10 of 1963 and 1965. The candle works evenly both in the summer and winter seasons. Good product I recommend and greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-15, 20:54
Tomasz
WSK 175 S2 SPORT Candle meets all my expectations it is well made gives a really good spark the work of the engine itself has improved and the price is decent what more to want I highly recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-09, 11:31
Sebastian
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-03, 12:41
Elżbieta
It performs well in romet pony. Although the price is quite high worth it, also due to the fact that French production. And not like the cheaper Chinese ones.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-17, 13:07
DOMINIK
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-12-21, 08:54
Adam
Romet ogar 202 50 4T 2016 year, very good product I recommend ,easy to install, met my expectations
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-30, 07:16
Klaudiusz
Romet Ogar 200.Currently after 4 years of riding it was time for an overhaul. One of the things I replaced was the spark plug.During these 4 years I never once replaced the spark plug, because there was no need. Now, when the opportunity to buy came, I decided that I would buy the identical one I had, because it is proven, (I also thought about a new Spark F80, which was originally installed, but after reading reviews about new Sparks - I gave up). Of course, the old one still works, but nevertheless it's been a while and I just preferred to buy a spare just in case. The prudent always insured ;) In short: a very good candle for not much money.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-09-13, 22:50
Patryk
For Romet Zetta 50 fits like a glove - it looks identical to the Chinese original. The rubber cover on the side of the high-voltage cable, admittedly, is hard to enter the cable, but this is an advantage in my opinion - it reduces the risk of moisture getting inside. After installation, the difference is unbelievable, the spark on the spark plug has improved, it is strong, and there is no phenomenon of "falling ignition". I recommend!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-29, 07:12
Karol
MZ ETZ 250 1983 For the price, the wrench is really well made, so you can be sure that it will not fall apart at the first better unscrewing of the plug, as is sometimes the case with Chinese products made of thin sheet metal. The only drawback is the length of this pin - it should be about 5 cm longer. If the candle is screwed in tighter, you need to spin through a rag or replace it with a longer rod.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-15, 09:57
Jan
Small, sleek, handy. Thanks to the removable pin, we have the opportunity to significantly reduce its size, and thus pack it into a handy tool kit. It is not tall, so it will easily fit between the cylinder and the tank on most unicycles. The overall glossy galvanized finish makes a very good impression. In good conscience I recommend it!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-28, 08:22
Hans-Peter
I have installed these Iridium spark plugs in all 3 of my vintage motorcycles, am more than satisfied and can only recommend them. and can only recommend them. Kawasaki 500 Mach 3 built in 1973 Kawasaki 750 Mach 4 built in 1972 Yamaha RD 350 built in 1975 Better engine response and very long service life. service life. Also very good free-burning of the spark plugs.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-19, 02:31
Boszu
I use Avin Iridium plugs in Chinese motorcycles and they work 100% well. In the case of installation of this plug to our Polish Romet of the era, there is even poetry in the work of the engine! :) No misfiring, firing on "tick", improved power due to better combustion and the mentioned no misfiring. I highly recommend to everyone! You will definitely not be disappointed! ^^
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-09, 15:23
Mateusz
Hi!!I am the owner of a quad 150 atv for which I decided to purchase the above spark plug.The product is doing a great job,I have no reservations about it,you can really use it for a long time .The plug fits perfectly in the hole to the combustion chamber and gets the right temperature during the spark which allows you to keep the combustion chamber very clean.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-09-15, 23:32
Adamsky73
Iridium for that kind of money? - I thought it couldn't work. and I was wrong. WSK 125 forest terrain about 600 km mileage and forgot about the plug. Similarly, the second WSK - asphalt more than 1200 km and no problem. Engines run evenly, no "ignition loss" or starting problem. Perfect for two-strokes on lapping - zero carbon build-up.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-31, 06:03
Jakub
I've always used Iskra candles, but tempted by reviews from the Internet, the first time on the test3 lup just this one. Awine iridium, what I can say so far works, major differences from Iskra I do not see, but probably will last longer, it seems to me that it does not even get so dirty.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:14
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:15
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-02, 15:17
Tomasz
I ordered the NGK CR7HSA candle from gmoto.co.uk and I am very satisfied with the purchase. The plug is of high quality and works very well. The engine runs smoother and I save more fuel. I recommend this plug to everyone who is looking for a reliable and efficient spark plug.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-08-05, 17:40
Marcin
simson s51-70 year pr 1978 This Japanese company's candle is awesome because the motorcycle has a lot of power and pulls in every hill without slugging. It burns from the first kick cold or warm. Naprawde very good candle ticks at gmoto I will buy all products and motorcycle parts.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-26, 11:24
Andrzej
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-13, 19:06
Zita
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-27, 14:11
Dawid
I thought it would be a disposable "dziod" but I am pleasantly surprised, I screwed into the motorcycle, after unpacking straight from the box, the break I did not have to set and it fires from the last fret, I would be tempted to say that it is even better than the new NGK. RECOMMEND
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-06-16, 12:09
Marcin
The spark plug gives a really good spark and the Simson S51 works perfectly with it. Workmanship and quality at a very high level well and this red color also looks nice. I highly recommend to everyone, the product is worth its price and without reservations.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-17, 09:48
Jan
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-11-09, 09:27
KrzysztoF
Ogar 200 The key looks very good quality. The handle pulls out so with hiding in the box there is no problem. In addition, it is short enough that an inexperienced "mechanic" should not turn the thread. In good conscience I can recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-12, 18:00
Maciej
The wrench is not suitable for installing candles of size 16 mm. The surface prepared for size 18 is too long for the wrench to properly slide on a smaller candle. The problem occurs with the motorcycle Yamaha XT660Z, vintage 2009.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-15, 20:20
Jakub
romet ogar 205 1987 spark plug made very well thread perfect for my head does not stick out only electrode strong spark I recommend NGK but more iridium due simply to the material of making the electrode (iridium)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-02-22, 08:51
Ireneusz
I own a 2020 KDX Avenger 125cc quad and had a major problem with the ignition. The purchased spark igniter needed to be reworked, because the input did not fit on the pins. But it was done successfully, the quad runs like gold. I recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-31, 06:19
Stephan
I bought the spark plug out of my youthful experience so that it always "rides along" in the moped spark plug wrench as a spare part and prevents it from breaking down. The whole thing at a fair price...Always happy to do it again!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-26, 12:39
Robert
Certainly a useful thing, universal and very good. Made of the right material, fits the described dimensions of candles and looks quite good and solid. I think it will be a durable and helpful item in times of need. Thank you
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-04-23, 23:50
Paweł
Romet Motorynka 1980 Motorynka undergoes a major overhaul, I replace all components that are damaged or tired of time :). Good quality goods. Was it worth buying - definitely YES
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-28, 10:07
Jerzy
The NGK BR&HS spark plug is superbly made. It always gives a good spark. If I have any problem with the spark it is only due to poor fuel. I use it for a WSK 125 and for a WFM and it performs flawlessly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-22, 12:48
Jacek
Spark plug NGK CR7HIX iridium fits HONDA CM 125C YEAR 1987 very easy installation good quality thanks to this plug moto has less combustion and fires without problems iridium plugs recommendable
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-09, 09:17
Łukasz
There is an error in the description of the goods in the store. According to the description, the plug should fit the Kymco Downtown 300, Unfortunately, the original plug has a longer thread. On this plug the motorcycle runs unevenly and goes out.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-12, 21:34
Fab
The plug did its job, the romeo ignites beautifully, even engine operation. In my case, it runs better on the described candle (compared to ISKRA 80). It is really worth investing in this candle.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion









