Forgot password
Order status
Free delivery from 150 euro
Motorcycle suspension - Front - Page 9
Options +6 
Browse Motorcycle suspension - Front - Page 9 by manufacturer
Products reviews
It arrived secured ( I entered my scooter model and wrote that it fits ) this is a huge plus because we do not order in the dark besides I installed the shock absorber and it sits lux I recommend I already have in my cart the next products for my ? I recommended to my cousin then he ordered se plastics and manoeuvres POLECOM!!!!!!!!!!!!!! Ps: the shock absorber is dirty by me because the grease was on the paws but it came clean.
Review translated automatically
Reliable opinion
WSK 125 1983r Bushing material and dimensions appropriate. It is nice that the outside diameter is in "plus". You can perfectly machine the bushing to the size of the "worn out" inside the lags.When you do it for a tight fit, beware of the heating of the bushing (the dimension increases). After machining it is worth "soaking" in oil and once again try on.Very good workmanship - a big plus.
Review translated automatically
Reliable opinion
Hello quite recently I bought steering rods for qad , only I did not read the description because they are normal and left thread my mistake but I ordered (those with left thread ) about 12 the same day and they came the next day so that + for them besides they are very well made and for sure I will not soon order another .
Review translated automatically
Reliable opinion
Shock absorber rubbers are perfect, I ordered them with the intention of installing them to Yamaha TW125 . The material from which they are made is solid and solid, the parameters are as described, I should add that the original rubbers in TW were 100 times worse in quality than the ones I ordered :) I highly recommend the product !
Review translated automatically
Reliable opinion
WSK 125 1983r Bushing material and dimensions as suitable as possible, although the inner diameter could be in the "minus" these 0.2-0.3 mm due to the wear of the lag. Installation without problems. - Another "front end" works as it should.
Review translated automatically
Reliable opinion
Very good product admittedly it is difficult to stretch but the result is worth it the rubbers are of very good quality and adhere very well to the shock absorbers
Review translated automatically
Reliable opinion
This is what the Jawa 350 looks like with parts from Gmoto everything fits as it should no modifications needed to fit the parts. Best regards and I recommend
Review translated automatically
Reliable opinion
Springs fit like a glove in combination with new bushings also from gmoto the front works perfectly. Professional service advice really worth recommending!!!
Review translated automatically
Reliable opinion
The bearings are very solidly made. The transaction went successfully without any complications. I highly recommend this store to everyone.
Review translated automatically
Reliable opinion
Bashan 200 - Conforms to the original. Simple and easy installation. Quality of rubbers good. Additional lubricator is a big plus. Recommended.
Review translated automatically
Reliable opinion
I own an 80 yr old wsk 125 . The parts that I ordered from you meet all the characteristics that they should.
Review translated automatically
Reliable opinion
Hi. Goods of very good quality, the thread screws on without any problem. Shiny chrome adorns the entire regimen
Review translated automatically
Reliable opinion
I own a WSK 125 motorcycle and I am just in the process of restoring it, in connection with the reconditioning of the front shock absorbers I made a purchase of two upper bushings. After receiving the order, at first glance you can see that one of the bushings is larger than the other. After mothballing, it turned out that one was 31x35.5x41, which is what I ordered, while the other had dimensions of 31x35.5x51. I made an attempt to make a call, however, on the hotline I received a message that I was perth in line for a call and it was like that for several minutes. I don't know how long you have to wait for a connection but it is far too long I didn't wait and there is no other form of konak.
Review translated automatically
Reliable opinion
Hello, I am in the process of restoring a 1970 WSK M06 B1 motorcycle. From new, the only owner was my father, so I decided to restore this "monument". The gmoto online store proved to be very helpful, I ordered here many parts without which it would not be possible to repair many components (for example, a bumped head frame bearing). Gmoto store can boast of a very large assortment, the offered parts are of good quality, well protected during transport and quickly reach the customer. Best regards, Krzysiek.
Review translated automatically
Reliable opinion
Hello, WSK 125 M06B3, year 1974.I had difficulty putting it on, the rubber goes in very hard on the lag, not sure if it is supposed to look like that. After putting it on, it is very hard to adjust the height step. For those who have a similar problem, I suggest lubricating the leveller with oil and it will go in smoothly. Material and aesthetics ok, I think the inner diameter could be a little larger and everything will be fine.
Review translated automatically
Reliable opinion
Mz Etz 250 motorcycle from 1987. Unfortunately, often leaking front shock absorbers is already a tradition of this motorcycle.Purchased at Gmoto repair set looks solid and when assembled, all components matched, the installation went smoothly. The most important thing is the quality of the Simera sealing rings, but this will turn out after riding a few hundred km.
Review translated automatically
Reliable opinion
The springs have not yet been installed, but the workmanship of them is really fine. The dimensions match, only as far as length is concerned, they are a little longer than in the description, but this is not a problem, because even if they did not fit in length, you can gently trim, although I think that for a stallion they will fit without a problem anyway. Generally recommendable.
Review translated automatically
Reliable opinion
Firstly, errors in the description of the length of the sleeve is 50 mm - you need to cut down to 40,50 , because it will not fit the simering and the nut.Secondly, the outside diameter is 36.5 mm - need to grind to 35.9 - a long and arduous job.The quality of the sleeve seems very good, but grinding it to the necessary dimensions, is a nightmare.
Review translated automatically
Reliable opinion
Good prices, some products available only here. I bought rubber shock covers - they fit bicycle shock absorbers. The originals are not produced, so this is the only place to get such a thing at normal money. The quality does not knock, but for the price it is as OK as possible. I recommend!
Review translated automatically
Reliable opinion
The product as described, the delivery was fast and hassle-free, the product is confusingly similar to the original from the era although I have the impression that for wfm could be longer by 3-4 cm the quality of the material from which the part is made seems to be good. As for durability it will take time to determine.
Review translated automatically
Reliable opinion
Everything super element is often in a deplorable condition due to the age of the engines to which it fits. It doesn't differ from the original in anything, so if you are renovating an old Java you can order boldly for sure no one will recognize that the rubbers are not from the original release. Regards.
Review translated automatically
Reliable opinion
I own a 1982 Java 350 TS motorcycle and was in dire need of these shock absorber rubbers and decided to buy them. They fit my motorcycle perfectly and the installation went very quickly and smoothly. The quality of the material is very good and strong. I highly recommend this product.
Review translated automatically
Reliable opinion
The product of very good quality. I personally left and installed, rubber covers - the original long ones. It would be useful if just such a set was available for purchase, because it simply makes the MZ look nicer. Overall, I am satisfied with the purchase. Everything on the plus side. I recommend.
Review translated automatically
Reliable opinion
The product of very good quality. I personally left and installed, rubber covers - the original long ones. It would be useful if just such a set was available for purchase, because it simply makes the MZ look nicer. Overall, I am satisfied with the purchase. Everything on the plus side. I recommend.
Review translated automatically
Reliable opinion
I own a quad shineray 250 stxe purchased tips as much as possible fit this model. Installation was done without any problems. A small hint for beginners for the steering rod you need tips with right and left thread (I did not know this) ;)
Review translated automatically
Reliable opinion
Java 350 TS 638 1989 Well made, tight, fit over the lags. I think the original ones were different, because I had plastic rims in the motorcycle, which can not be mounted in these rubbers. They hold well, but I would still recommend to buy compression bands ;)
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store there are many parts for motorcycles and mopeds Parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials
Review translated automatically
Reliable opinion
The material is ok. the outer dimension could be more accurate to speed up the fit, because the inner dimension needs to be slightly corrected - but this is an advantage of these bushings. The price glaringly, because a kpl for both lags is about 100pln.
Review translated automatically
Reliable opinion
I have a WSK 125 motorcycle and I was doing a general overhaul garlands fit well and can be installed without any less problem I highly recommend super product almost like the original delivery is without any additional problems.
Review translated automatically
Reliable opinion
Jawa 350 TS. It fits perfectly in place of the originals. One thing that can be complained about is the sizable bumps on the mold division. However, this is more of an aesthetic detail that does not affect functionality.
Review translated automatically
Reliable opinion
The wheel axle fits without problems. The zinc plating protects it from rusting. The nut included is with self-locking plastic, so it is better to change the nut to a regular one to better reflect the atmosphere of a bygone era.
Review translated automatically
Reliable opinion
Shineray 250 spyder 2011r tie rod end very solidly made everything fits as expected assembly of parts goes smoothly even da people who have never done it
Review translated automatically
Reliable opinion
Shineray 250 spyder 2011r installation of upper control arm ends was very efficient everything fit as it should I recommend this product to other users
Review translated automatically
Reliable opinion
Junak M-10 Replacement zimmering in the front suspension. Maybe a little too soft, we'll see in a while if it doesn't leak.
Review translated automatically
Reliable opinion
Quad ATV 125 rods fit perfectly shipping is lightning fast I would recommend this company to anyone!
Review translated automatically
Reliable opinion
Simson sr50 1993. repair kit approx.
Review translated automatically
Reliable opinion