Motorcycle suspension - parts
Honda CX 500 1978

2020-02-25, 22:28

View original

Johan

Used for Honda FT 500 1983. Fitted within the hour (after disassembly & preparation = removal of old bearings). Have used 50 mm pvc pipe to drive bottom cup in; tightness of fit was as it should be. Did not use the supplied washer but made my own of 30x36x3 mm so the original rubber seal could sit below the (inner part of) the bearing. Re-used the original bottom washer (0.8 mm thick) to shield the seal. The (upper) adjustment nut also carries a thin shield. I had to grind the spigot (for the shield, on the nut) to a chamfer, as it just touched the radius of the upper bearing inner ring. On the 3rd picture, where the shield lies under the nut: red arrows = grind inner dia of spigot, shield fits at outer dia (on top as depicted). Ordered a 2nd set for my Honda XBR 500.

Review translated automatically

Reliable opinion

2018-08-21, 16:25

View original

Jakub

Honda CX 500 version CUSTOM year 1983 oil seals in perfect size. The dust seals sit tight on the shins and do their job in preventing dirt from getting in. Quality of materials very good, there was no problem with installation.

Review translated automatically

Reliable opinion

2022-07-07, 06:20

View original

Wiesław

Honda CB400N 1982.Workmanship of the seals very good. Installation without any problems. After driving about 400 km. after installation no leaks of any kind. I recommend

Review translated automatically

Reliable opinion

2025-10-14, 11:40

View original

salmon Sébastien

The equipment is exactly as described. Very good value for money. Delivery was very fast. Site to recommend

Review translated automatically

Reliable opinion

2025-07-27, 03:03

View original

seignier

good product, ideal for our old bikes.

Review translated automatically

Reliable opinion