Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2024-09-25, 08:59
Mateusz
This is my next mat from this manufacturer. Very durable. The bottom side non-slip to prevent sliding, the top does not let liquids through. Definitely reduces the risk of damage to the tank when working in its vicinity. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-10, 18:21
Patryk
A simple device and very helpful. After I bought it, I immediately checked the tires on my motorcycle and car. Supposedly there is a TWI indicator on the tire, but this is the maximum wear and it is not worth waiting until the tire is so badly worn, so I check it beforehand. With this gauge you can check if the tire is also wearing evenly on the sides. E.g. in a car you can immediately detect a bad alignment. The gauge has a scale in [mm] with a mark of maximum wear for summer tires and winter tires separately.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-28, 19:21
Jochen
Unfortunately, the seal on the lower thread was not big enough and the brake fluid leaked out at the screw connection. I was able to help myself and use another seal from my spare parts shelf and then everything was OK
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-16, 20:05
Patrik
Unfortunately, the connection of the reservoir is not tight, which means you end up with more mess than if you pour the brake fluid over it by hand. You can no longer stop when the reservoir is full and sitting on the ABS block. Really very disappointing.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-24, 19:39
Tobias
The filler did its job well, the thread fitted and also held tight, contrary to expectations, as some YouTube tutorials had spoken of leaks. However, the price is quite high for such a simple part.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-01, 15:25
Heinrich
The part cannot be used for the BMW R1150 GS with Integral ABS because it does not seal at the reservoir. The brake fluid runs out heavily at the screw-in thread. Screwing it in tighter would damage the thread.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-01-22, 08:44
Piotr
The wrench fits BMW oil plugs, even the newer versions, high-quality product, made of aluminum. Recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-04-29, 07:50
Václav
It came back fine. It fits nicely. .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion







