Kimpex - Motorcycle rear shock absorber

2024-10-28, 13:57

View original

Patryk

Shock absorbers at a very good price. Strong paint job, working adjustment. Wsk 125 has mounting holes for shock absorbers for m12 bolts The shock absorbers have an upper hole m12, but the lower hole is for an m10 bolt. The solution to the problem in my case was to make a new bushing with a larger diameter. It was able to be pressed into the rubber of the shock absorber without any problem. Also, due to the fact that the WSK motorcycle shock absorbers on the mount at an angle, I recommend putting the appropriate large washers to prevent slipping of the shock absorber, which often happens. I recommend and encourage you to buy!

Reliable opinion

2024-09-25, 14:32

View original

Karol

I do not recommend the shock absorber it sucks from the very beginning when it came to me it was a bit sunken when I put it on it turned out to be softer than the previous one which was sunken when riding with a passenger the shock absorber is worn to the end it practically started to leak and I have only had it for a month and a half

Reliable opinion

2024-03-06, 07:29

View original

Jakub

Shock absorbers made aesthetically and solidly. After 4 years of use, the chrome on the springs is still in great condition, the bushings are also without reservations. Note, because these are shock absorbers for the so-called Belarusian version! Designed for low mounting on the control arm. I recommend for Minsk 125.

Reliable opinion

2024-09-20, 10:15

View original

Mariola

Product of very good quality. I ordered two items in separate orders and got both items together . I only had to pay for one shipment . Greetings and highly recommend

Reliable opinion

2024-07-20, 06:24

View original

Mateusz

The shock absorber came well packaged with no damage it works and bounces perfectly as it should recommend I invite you to buy!!!

Reliable opinion