Forgot password
Order status
![Valve Shim HLP 9.48mm [2.20mm]](https://gmoto.ie/assets/images/no-photo.png)
Free delivery from 150 euro
Stickers & emblems for motorcycles - Page 3
Manufacturer
Price
Sort
from 20
Browse Stickers & emblems for motorcycles - Page 3 by manufacturer
Products reviews
WSK 125 1985. Material as in the original. The fit is average (one of the mounting studs misaligned by about 1.5mm) I would suggest that the manufacturer make the mounting studs longer by 2-3mm and about 3.3mm in diameter and then this can be mounted on M3 nuts. Heat mounting is a bit "disposable". I recommend.
Review translated automatically
Reliable opinion
Everything fits the only thing I could complain about is that you get a piece with cut on the plotter spars but they are not selected photo below,transport film should be on the whole stickers and not added piece 30cmx20xm, but I recommend because the effect is worth it .
Review translated automatically
Reliable opinion
In general, the film for such a price is really well made, it fits nicely on the plastic, looks good, but it could be a little thicker and stiffer. I have had the film for more than 3 years now and it presents itself as in the pictures. ( The cut was caused by a crack in the plastic)
Review translated automatically
Reliable opinion
I have a scooter with a capacity of 50ccm Yamaha, zachtielo se mi tuning so I ordered a foliu a must sayet ze super podajna ladnie trima a wiglond perfekt bardzo jestem zadowoleny wsem wrele doporuczam daju sie zrobit czuda ocieniam foliu za super pomisl a bardzo dostempna cenowie.
Review translated automatically
Reliable opinion
Greetings. Emblem 125 white I applied to a motorcycle WSK garbuska from the seventies ;). The product is very good, it fits the holes in the original cover, the installation is easy and looks great. recommend and greetings.
Review translated automatically
Reliable opinion
Stickers applied to new blue paint, so it looks like new! You have to be careful not to bend the corner, because later it sticks poorly, as much as possible RECOMMEND.
Review translated automatically
Reliable opinion
The best templates, shipping promptly, contact excellent and price perfect. I highly recommend the seller :)
Review translated automatically
Reliable opinion
Romet Komar 2350 fits perfectly, good material, carefully made, I am very satisfied, recommend !
Review translated automatically
Reliable opinion
WFM 125 M06 from 1961. Stencil consistent with the original. Used as a stencil. All ok, photo attached.
Review translated automatically
Reliable opinion
Quality super already looking forward to the final result. I am currently in the process of reactivating a WSK 125
Review translated automatically
Reliable opinion
Komar 2350 , stickers very nicely made , pattern on the original, bard zo good quality
Review translated automatically
Reliable opinion
For a long time I was wondering what to buy. There are various products to choose from. I decided on a resin sticker. With curiosity I waited for the delivery to see how this product would look like. I can confidently recommend, the size fits perfectly in its place very nicely. It looks very durable. And this is what I really cared about. Someone may say that it is not the original, but the design itself is like the original so it looks very good. The decal has not yet been installed because I am just in the process of renovation And I leave the details for last. Certainly these are not my last purchases here.
Review translated automatically
Reliable opinion
Veneer film looks great , impresses others. However, you need some time patience and skill to veneer with it. I wrapped it with the help of a tanner, which is indispensable stones from my honda cr 125. I managed to wrap all of them aesthetically. Only at many recesses and profiles of the fender the film can not cope and detaches and crumples.
Review translated automatically
Reliable opinion
My Suzi VX 800 is already quite old because it is from 91 and some plastics are faded. This film made them look like new. It is great to apply on faded plastics, which should be degreased beforehand, and the film should be heated with a hair dryer to make it more flexible. I recommend https://gmoto.pl/folia-okleinowa-carbon-50x127,99486.html
Review translated automatically
Reliable opinion
The appearance is practically the same as the original, the material of good quality, unfortunately, for the plastic side of the small does not fit. The spacing of the two outermost mounting studs is bad, you have to saw holes in the sideboard and mount with hot glue. There has been a problem with this for almost 3 years and no one has corrected it so far. kind of lame.
Review translated automatically
Reliable opinion
I own a WFM M06 , a capacity 125 from the year 1965.The purchased spars really helped a lot during painting. They are very useful if you want to paint your motorcycle quickly and efficiently. Admittedly, they are a finishing touch, but the effects are very satisfactory without them the finishing would be more difficult.
Review translated automatically
Reliable opinion
Jawa 50 armored type Super product, perfectly holds the plate. They look identical to the original ones. I have no reservations about the rivets. Carrying out the renovation of the motorcycle are irreplaceable. Wanting to paint the frame, you need to remove the plate and the old rivets do not properly hold the element. I recommend
Review translated automatically
Reliable opinion
Rivets may be expensive for such a triviality but they are great. Gently swollen in the middle with grooves that cut into the material of the hole. Thanks to these advantages, it is not necessary to seal the rivet, Just drive the rivet and it holds the plate perfectly, at the same time it does not interfere with the installation of the post.
Review translated automatically
Reliable opinion
The purchased WSK 125 logo emblems are perfectly matched to the original mounting holes of the WSK-i sides/cover. Installation on my motorcycle was surprisingly easy, just using , "hot glue," to install the , "pivots," of the emblems in the cover/shield on my motorcycle.
Review translated automatically
Reliable opinion
Not an expensive product, it depends on the shapes we will be wrapping. If the scooter has more complicated shapes, veneering can almost become very difficult for those who use it for the first time. If you have no experience with such things, I don't recommend it.
Review translated automatically
Reliable opinion
Hello, I own a 1985 Romet Ogara 200 w with a 49cc Java engine in original condition with 800km mileage. Coral color. I am satisfied with the purchase, the quality of workmanship is high, conformity to the original is also at a high level.
Review translated automatically
Reliable opinion
Wsk 125 1977 plastic covers - the two lower mounts do not fit, they have too small spacing. Filing the holes in the cover does not help because it simply creates a gap that is not covered by the emblem. I rate the fit on a scale of 1 to 5 as 1.
Review translated automatically
Reliable opinion
Hello, I ordered emblems for WSK 125 I would like to highly recommend to everyone, the quality is sensational, everything worked out to the last detail A big plus is the price In a word, if you want your WSK to look sensational then order without hesitation :)
Review translated automatically
Reliable opinion
wsk 125 humpback, version with plastic large sides. The emblem does not fit on one clip (the first or the last one, depending on which side you start putting on). You have to file the hole with a file to get it to go in.
Review translated automatically
Reliable opinion
WSK 126 M06 from 1961. When I ordered it I was hoping that for 20 zl for 2 pcs it would be a decal like the original but there is a nice decal printed on self-adhesive film. Let's hope it will last for years just like the decal
Review translated automatically
Reliable opinion
First I will write about the company I forgot the one for the sticker and the company rose to the occasion and sent it to me at their own expense. And now about the sticker sticker nice also cool that there is a glowing stripe in imitation of hromium.
Review translated automatically
Reliable opinion
The emblem was made carefully. Due to the fact that the side covers used on my motorcycle, do not have holes, I removed the pins and the emblem was glued on double-sided tape. It presents itself perfectly.
Review translated automatically
Reliable opinion
I own a motorcycle WSK 125. As for your products, I can only say that better ones can not be found on the market. The product is made perfectly and very fast delivery ;) Greetings and thank you
Review translated automatically
Reliable opinion
I own a Rometa ogara with a 50ccm yawl engine The parts are of very good quality, I did not have to struggle with their installation I heartily recommend if you want good parts :D
Review translated automatically
Reliable opinion
Spars made perfectly fit very well gluing went well but you need a lot of patience if you don't have it better not to tread for it I highly recommend it
Review translated automatically
Reliable opinion
The nameplate rivets do the job, they fit perfectly and reflect the communist era. The 1982 WSK 125 motorcycle highlights the restoration details thanks to the rivets. Recommended.
Review translated automatically
Reliable opinion
Romet ogar 200 poj. 50 cm 1983 Very good workmanship no graphic errors, easy to stick. Ogar looks like it came out of the factory. I recommend
Review translated automatically
Reliable opinion
Very good quality product, everything fits perfectly, made of decent material, so I know it will last a long time. I recommend parts from the store.
Review translated automatically
Reliable opinion
Romet Ogar 200 1986. The material as well as the print looks nice. Everything holds as well as looks good. The air filter sticker is missing from the kit.
Review translated automatically
Reliable opinion
Product as described, price very good. shipping very fast. I recommend as much as possible. I am most satisfied with the quality and speed of shipping
Review translated automatically
Reliable opinion
Rivets not yet used but I tried them on and they fit perfectly the price is a bit staggering but I can understand it because who will run around the warehouse and look for a rivet for 30 cents
Review translated automatically
Reliable opinion
The product looks like the original from the factory, my friends thought I had the original paint, looks great on the blue colt 200. recommend
Review translated automatically
Reliable opinion
Stickers in very good quality I highly recommend this product Fits perfectly to the ogar 200 On the plus side price for such good quality
Review translated automatically
Reliable opinion
The rivet has a slightly too small diameter of the head to rivet the plate to the Shl-ki m11. You have to give a washer so that the plate does not fall off.
Review translated automatically
Reliable opinion
Wsk humpback 125.Rivet perfectly reproduced on the original.Looks good and holds the plate very well. Super quality for so little
Review translated automatically
Reliable opinion