Pivot Works - Motorcycle suspension - parts

2024-07-21, 18:33

View original

Zbigniew

High quality product. Precisely made. Each element marked with a laser description of the manufacturer. On the manufacturer's website there are certificates allowing the item to be used. The package includes a short instruction manual (unfortunately, there is no Polish description), but the steps to be performed are simple enough that anyone should be able to cope with it. The manufacturer warns that after replacing these elements it may be necessary to shorten the side feet - this is what happened in my case on a 2017 Honda x-adv. The expected effect - lowering the motorcycle - was achieved. During the test ride (about 100 kilometers), I do not feel the effect of changing the suspension elements on the comfort and safety of the ride.

Reliable opinion

2024-10-28, 13:57

View original

Patryk

Shock absorbers at a very good price. Strong paint job, working adjustment. Wsk 125 has mounting holes for shock absorbers for m12 bolts The shock absorbers have an upper hole m12, but the lower hole is for an m10 bolt. The solution to the problem in my case was to make a new bushing with a larger diameter. It was able to be pressed into the rubber of the shock absorber without any problem. Also, due to the fact that the WSK motorcycle shock absorbers on the mount at an angle, I recommend putting the appropriate large washers to prevent slipping of the shock absorber, which often happens. I recommend and encourage you to buy!

Reliable opinion

2024-06-17, 04:24

View original

Michał

I am happy to recommend GMoto company. I ordered a hard-to-find part for the front suspension from them, and it was a rubber bumper from Kayaba, which with 100% certainty fits the '03 YZ250F, because I put it on that motorcycle. If they didn't have it I would have had to send the part from Japan - which would have been very expensive. Quality, fit appropriate for the price. I recommend to all interested parties

Reliable opinion

2024-08-31, 05:17

View original

Kamil

It arrived secured ( I entered my scooter model and wrote that it fits ) this is a huge plus because we do not order in the dark besides I installed the shock absorber and it sits lux I recommend I already have in my cart the next products for my ? I recommended to my cousin then he ordered se plastics and manoeuvres POLECOM!!!!!!!!!!!!!! Ps: the shock absorber is dirty by me because the grease was on the paws but it came clean.

Reliable opinion

2024-11-05, 11:39

View original

Czesław

The bushing is not suitable for the Osa M52! 1). Outer diameter of the bushing too small ; it is Dz 20mm, should be Dz 22mm, 2). Width of the bushing - is S=20mm, should be - S =22mm. I purchased pieces of 4. Greetings : Czeslaw Ratajczak

Reliable opinion