Universal motorcycle turn signals - Page 4
Manufacturer
Price
Sort
Podobne :
Podobne :
Podobne:
Podobne :
Browse Universal motorcycle turn signals - Page 4 by manufacturer
Products reviews
2017-10-18, 22:04
Marek
Motorcycle honda hornet 2002 volume 600 cm as you can see in the attached photo the original indicators do not look too good, so I decided to buy new indicators that will add an amazing look to the moto. The indicators are made of very good material, the leds shine brightly, which guarantees safety, installation is very easy. In a word, I am satisfied with the purchase
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-06, 11:17
Jakub
In the photo, the new turn signal is on top. The quality of the housing and center is severely average. The turn signal shade is no different from the original except for the inscription. The housing is made of smooth plastic easy to scratch (the originals are rough). There is no silver element inside that reflects the light from the bulb. A product rather for people who do not pay attention to aesthetics.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:11
Bartłomiej
Unfortunately, someone made a mistake in the installation of electrical wires and pins. Have to correct the factory, bulb, "no name" without any markings. Overall from the appearance nice. Lampshade and chrome frame minimally smaller in diameter than the originals, to put on the original lampshades you need to sand the edges of the lampshade minimally.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-07, 08:24
Adam
Turn signals very good quality well fit and look I can sincerely recommend them to all owners of German classics and not only I am very satisfied with the purchase thanks
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-12-28, 10:28
Franciszek
I own a 1982 Honda MTX 80 R2 the turn signals fit almost perfectly. The only problem was matching the cable ends and burned out bulbs. Overall OK
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-06-14, 08:10
Robert
Solidly made look nice on the motorcycle, I recommend to anyone who is bored with their own directions or needs to modify their vehicle
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-22, 11:37
Seweryn
I installed them in a bike but very good fit even in a simson only a few scratches but they fit very well good fit
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-13, 14:33
Thomas
The indicators are basically OK, unfortunately one of the indicators was already broken in the packaging.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-05-02, 08:38
krzysztof
PROFESSIONALISM IN EVERY ASPECTS!VERY HIGH QUALITY AND LOW PRICE PRODUCTS AND SO MUCH IT DOESN'T MATCH.BUT IT CAN! I bought turn signals for HONDA SHADOW, ONLY I DID NOT READ AND I THINKED THAT THEY WERE LARGER.ONE PHONE WAS ENOUGH for the courier to be at my work the next day, of course sent from the store Gmoto to receive the turn signals and without any problem I could return the goods.Unfortunately, most sellers on ALLEGRO BECAUSE OF THE PURCHASE AND TRANSFER OF MONEY DO NOT INTEREST THE CUSTOMER:-( GMOTO IS PROFESSIONALISM,QUALITY AND GOOD SERVICE.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-15, 14:31
Damian
Yamah xj 600n 4br 96' + The indicators look nice, they shine with a nice yellow light well visible during the day and even better at night, the metal housing painted in black gloss seems solid and durable, the glass is made of plastic which nicely disperses the light set on a gasket, the wires of adequate thickness ended with solid connectors. - too small mounting thread M8 (key 13) - paint streaks on the metal housing - not aesthetic screw fixing the glass
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-28, 10:50
Łukasz
Kingway XT50Q. Direction indicators are made fairly well, but you need to be careful not to tighten them too much because the rubber that holds the screw by which you tighten it, tends to tear :/ connection is very simple plus to plus minus to minus. The indicators shine with a good visible light even on a sunny day. They do not protrude much beyond the outline of the motorcycle, they are short and sleek, do not come apart after the first better deczsz or mud. In general, I recommend them to those who do not want to have a mega protruding lights :D
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-11, 23:51
Grzegorz
Virago 535 1988r a good alternative for those who do not want to spend 200pln on one original rubber mounting the turn signal, which sometimes like to break here for 120 we have 2 complete turn signals with a bulb, which is not always so obvious, in my motorcycle the diffuser and housing are different than these but that did not interfere with their installation, they are also beautiful, you can also obtain from them the rubber bands themselves and there will still be a lot of parts and money left if you buy this product and not the original Yamaha rubber bands
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-24, 15:19
Piotr
A turn signal purchased for a 1987 YAMAHA FZ750 motorcycle. This is exactly the kind I was looking for. Most of the available replacements including JMT have a whitewashed diffuser (from the inside it looks like you would sprinkle it with flour, and the outside looks matte). I was looking for an equivalent to the original, that is, with mirrored glass, and this one is exactly like that. High quality workmanship, for a replacement. The only minus - the shock absorbing rubber should be harder, so that on a rough road the turn signal does not fly like crazy. Other than that, everything is OK.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-12-21, 16:35
Dominik
The price is very attractive, the lights look good, you can unscrew the lampshade and replace the bulb, but I do not know what socket the holder has, if it was to determine the possibility to use a 6v bulb to fit into a 6v installation, if you have a small budget or are looking for directions such as: enduro in which it is known that they can quickly deteriorate, I recommend, the threaded element is a tube that can be screwed or unscrewed into the plastic rear housing if necessary for installation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-16, 10:25
Michał
I bought 4 pieces for the front and rear. The motorcycle looks much better than on the old directions. These are smaller, more aesthetically pleasing and, most importantly, they are Led, less current-consuming and better visible. They are shorter than the factory ones, which makes the machine look better, because they are conspicuous only after they are turned on, when they are off it is hard to notice that the motorcycle has directions at all ;-)Most to the plus. The price is not high. I recommend Zumico GR 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-28, 21:45
Łukasz
Hello My motorcycle is a 1968 MZ ES 250/2 TROPHY. I purchased these turn signals because they are identical to those that were installed in the orginale. A very high quality product. I was even surprised because the original parts are hard to get anymore and the non-orginal ones usually look bad and are hard to install. In this case, the appearance, fit and ease of installation surprised me very positively.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-23, 20:46
Maciej
Patient: Honda CB600F Hornet, vintage 2001. Mission: installation of new turn signals at the rear. Mileage: without any problems. The turn signals made great, everything fits, nothing sticks out, does not squeak or crackle. The LEDs shine brightly until nice. If you look from too close and turn on the blinker - you will go blind for 5 minutes. Tested. I recommend, turn signals perfect as for me.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-01, 10:04
corneliusk
Turn signals mounted on Kawasaki ER6N at the rear on a short bracket for the license plate, with the fit was no problem. They present themselves very nice, the light is very intense (visible) even in sunny weather, to the quality I have no reservations. I can in good conscience recommend these turn signals.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-08, 21:36
Arkadiusz
MZ ETZ 150 year of production 1989. turn signals very nice. I had to shorten the screw this side of the handle because it rested on the mounting tube screwed to the lagi. When you prubub screw it in by force you twist the thread in the turn signal. I don't know if the original ones had holes in the tubes or shorter screws.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-15, 10:11
krzysztof
Hello I was restoring a motorcycle in my opinion a classic YAMAHA DIVERSION XJ900S Z 1995R I was looking for new turn signals and yes there were but either used or completely not resembling the originals and here you go price ok appearance and quality super !!! The name of the company I recommended to others because they really are trustworthy
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-19, 09:15
Jan
I have a Simson Schwalbe and a '68 WSK 125 two frame prepared for registration. I will need a battery for this WSK, but only in May when it will be warmer and I will also order from this company because when buying turn signals for Simson everything went b.nicely. Regards Janek.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 08:30
SebastianKarpiel
I own a 98 Yamaha drag star 650 motorcycle, I ordered a pair of turn signals for it, which fit like a glove. The only problem I had was fitting the right nut for the fine thread, (the nuts were not included ). But after easy installation they do the job.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-02-02, 10:11
Damian
Cool directions. As luck would have it, my front right one burned out and I drove with those for 2 years. It was nice to get a pair. Material ok, I knew what to expect. I know from experience that they shine well and clearly. I hope there will be no problem with installation. Overall I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-08-14, 21:38
Krzysztof
LED turn signals with very good visibility. Made of very high quality materials making my gem look even more defiant ! I recommend the product wholeheartedly to people who want their motorcycle to look even better !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-21, 08:06
Arkadiusz
Quality of materials I will give a 4 for the flexible part of the turn signal because it bends quite significantly when driving. In addition, relative to the original ones with difficulty fit 21w bulbs, you have to unscrew the base of the bulb. Other than that, super
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-05, 16:42
Damian
Suzuki Bandit 2001r. Engine from gsxf 750.Motor assembled from 0 other than all the controversial colors that is why I needed small and nice turn signals that I bought from you. Thank you very much and best regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-03-06, 21:44
Robert
Yamaha XTZ 750, vintage 96.The original turn signal has a shorter frame and the one ordered had a longer one by about 1.5 cm -it was necessary to rearrange the elements but it worked out.Besides, inside there is no reflector like the original one
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-13, 13:32
Dominik
The turn signals perform well. They are mega visible, well matched to the appearance of any motorcycle. The metal housing is solid, although on the other hand, the turn signal is fixed , "rigidly".
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-05-19, 14:20
Kamil
The product works 100%, made in very good quality. Their size is very good, as it would be difficult to hook or other activities when getting on. I recommend it as much as possible.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-30, 23:38
Marek
I thought about these turn signals for a long time, but their appearance, quality and the material they are made of are really at a high level. Well, and they fit perfectly! I sincerely recommend them.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-03, 20:52
Lázaro
Great the product very good in everything ,confection price everything has good relation product price ,I continue buying everything by here what I need always and very well packaged.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-01-07, 23:27
Jan
I own a 2002 yamaha diversion very decent seller I am satisfied with the purchase of this merchandise from this seller regards and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-16, 21:02
Krzysztof
I own a Yamaha Super Tenere motorcycle and my old turn signal broke. I ordered a new one from Gmoto.pl and I am very satisfied. Workmanship, quality price for six. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-03, 20:21
Alexis
A relic to be able to buy the MZ /2 handlebar turn signals and very few have it or use it because in the first fall of shattering. Let's see how long they last.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-06-02, 13:10
Marcin
Yamaha Warrior 1700 2005r, turn signals very well and solidly made. The only minor minus is the screw holding the glass a little disfigures the whole thing. I rate it 4+ :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-09-04, 20:05
Tomasz
Product as described. Durable, tight, rigid does not shake when driving, visible from a distance in strong daylight. Easy to install. Recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-01-27, 15:29
Stanisław
My motorcycle is a Rieju RR 50.The turn signal for this price is really noteworthy. Very good aesthetic workmanship, the turn signal looks nice.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-08, 11:15
wojciech
Directional signs very nice. They emit a strong light. Workmanship super. I am satisfied with their purchase. Problem-free assembly. They will fit many moto
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-04, 21:33
Wojciech
The turn signal made aesthetically and to a high standard. Everything fits perfectly you buy and put on you are sure. Bulb included. Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-22, 22:51
Mariusz
Yamaha XJ 600S Diversion 1997. Turn signals perfect even nicer as in the pic now I have to replace and the ones at the back because the front ones too nice recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
















































