Forgot password
Order status
Free delivery from 150 euro
Motorcycle bodywork - parts
Junak M07 350
Manufacturer
Price
Sort
Options +2 
Browse by manufacturer
Products reviews
I am the owner of a motorcycle Junak m10, 350, from 1963. It is February so it is time to prepare the motorcycle for the season. One of the things, not functioning properly was the suction line, which passing under the handlebars simply broke. The new product turned out to be of good quality, during installation it did not cause any difficulties, in operation also, where with the previous cable there was a problem with returning to the zero position. Aesthetics like the original. I recommend, at me it works great. Regards
Review translated automatically
Reliable opinion
Motorcycle: WSK125, year 1976. The mirror bought in the auction is well made and fits the motorcycle as described. Very fast processing of the order: in less than 24 hours after buying at the auction the shipment was at home. I would definitely recommend.
Review translated automatically
Reliable opinion
WSK 175 S2 SPORT Kedra fits like a glove it is slightly smaller in volume than the original but for my sport it fits perfectly holds the edge of the tank no need to glue anything up nothing comes off I highly recommend it
Review translated automatically
Reliable opinion
I bought two mirrors with M8 bracket I put them on quickly and easily in my rodent ogar 205. They look great on it I like them very much they are very useful while driving. I heartily recommend them to me they work great.
Review translated automatically
Reliable opinion
Romet ogar 205 1985 year 49.9 cm3 looks beautiful with this mirror. It fits beautifully quality of workmanship I give 10/10, fit 10/10, aesthetics 10/10 and gmoto website I rate 999999/10 I heartily recommend this site :)
Review translated automatically
Reliable opinion
I am satisfied with the product quality of workmanship at the highest level fits perfectly to the org.Junak tank filler cap. I hope it will not swell under the influence of fumes. I am completely satisfied with the product
Review translated automatically
Reliable opinion
For the price of 10 zloty this mirror is very good, it looks nice, the workmanship is not extraordinary but at this price it is sufficient, well, and the most important thing is that it provides safety. I recommend the product.
Review translated automatically
Reliable opinion
The rubber pad looks very nice on the shelf between the cans. Workmanship b.good in my opinion it could be a little longer to fit perfectly between the two cibs. Junak M10 350ccm3.
Review translated automatically
Reliable opinion
Simson kr51/2 1985r. The kedra is made of a good flexible material that fits perfectly into the edge of the covers surely I will still want to buy it I recommend it
Review translated automatically
Reliable opinion
Junak M10 1962. The wheel rims and most importantly all the parts I have bought from Gmoto so far are of the highest quality and meet the requirements.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Very nicely made, thread fits, no problems with installation. Well galvanized
Review translated automatically
Reliable opinion
Very strongly reflects the original. The workmanship is aesthetically pleasing and silid clamp attaching the mirror to the handlebars.
Review translated automatically
Reliable opinion
Motorcycle WSK m06 B3 1983 year . The product of very good quality. Assembly went smoothly . I recommend 100%.
Review translated automatically
Reliable opinion
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
WFM M-06 1960.A very practical thing, the quality of rubber and metal parts seems to be high. However, since the battery mounting bases are different, so different lengths of the battery mounting straps should be. This is not compensated for by the slight stretchiness of the rubber. On my motorcycle, there is a big problem with attaching the strap. Several sizes on offer would be ideal. It would also be helpful to specify to what maximum length the strap can be stretched.
Review translated automatically
Reliable opinion
The mirror was installed in a jawa 50 mustang 1976 the installation took 2minutes the mirror is very durable and resistant to serious falls it is aesthetically made it even improves the look of the motorcycle at this price it really is a product worth recommending to anyone who has an old type motorcycle without a mirror or even to a bicycle I RECOMMEND!!!!
Review translated automatically
Reliable opinion
Perfect fit for WSK 175.No problems when putting it on, the battery holds rigidly, does not vibrate, does not jump, Nothing to add nothing to add. The only disadvantage of the belt is the aesthetics of the workmanship, because there are overlaps around the metal parts, but you can turn a blind eye to this. Just sit with the knife for a while and it will be ok, I recommend! :D
Review translated automatically
Reliable opinion
Motorcycle Junak M10 1963r. The rubber works very well, it fits tightly which can make it a bit difficult to install, in return it fits perfectly to the leg so that it does not move, not to mention slipping. The rubber is soft and flexible, making it much more comfortable to start the motorcycle.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Well, unfortunately, I do not recommend. It fits neither the SHL M11 (1965) nor the SHL M17 Gazelle (1969) - incorrect attachment (there should be buckles on two sides, they could be smaller than what is installed)) well and for the Gazelle it should be a bit longer. Workmanship aesthetics are also average.
Review translated automatically
Reliable opinion
WSK 125 In general, the tensioner is ok. A little loose lock nut and thus skipping thread. But, as I know life, one in a few hundred pieces will be like this. Slightly squeezed in a vice and it's done. The tensioner works as it should. I recommend.
Review translated automatically
Reliable opinion
Once again, I did not have to look anywhere because I knew right away that with you I would find what I needed. Another purchase, another successful transaction. I won't put a picture because the rubber filler cap has already been put on and the motorcycle has already been delivered to the customer.
Review translated automatically
Reliable opinion
romet ogar 205 1987 i bought a mirror and despite its price it is really very good quality nothing better for this price you will not find the clamp holds nicely to the handlebars and without the clamp it fits to the holders in scooters i recommend for this price !
Review translated automatically
Reliable opinion
I bought a b. dilapidated motorcycle Romet Ogar 205 from the 80's which I am passionate about rebuilding. Hence the recent contact and purchases from your company. I do not publish photos because everything is in powder, laid out on the garage floor.
Review translated automatically
Reliable opinion
At your store it is always honest and reliable you try to have good parts in other stores it is difficult to find something good for romet kadet although it is an old motorcycle but with your parts it is still worth renovating greetings Peter
Review translated automatically
Reliable opinion
I bought the mirror for the ogar 205. qualitatively it is not bad for the price. The only thing that could work better is the clamp on the handlebars (it moves easily despite the strong tightening), but I think a piece of rubber will take care of the matter.
Review translated automatically
Reliable opinion
I bought two mirrors with M8 bracket I put them on quickly and easily in my rodent ogar 205. They look great on it I like them very much they are very useful while driving. I heartily recommend them to me they work great.
Review translated automatically
Reliable opinion
WSK 125 M06 B3 - fits perfectly - you need to stretch the rubber decently, which makes the battery sit stiffly. The rubber looks like not very good quality and the brackets look like rusted and covered with a layer of "tin".
Review translated automatically
Reliable opinion
romet pony m2. It fits easily on the handlebars, the visibility in it is very good the mirror came divided: separately the mirror itself as well as the clamp. Fixing it is easy as well as pleasant I recommend
Review translated automatically
Reliable opinion
Kawasaki ltd 440 1983 overall a very good product very good fit adequate appearance also very nice it's a pity that kedra does not come in meters only in one meter pieces yes I highly recommend it
Review translated automatically
Reliable opinion
Kawasaki ltd 440 1983 overall a very good product very good fit adequate appearance also very nice it's a pity that kedra does not come in meters only in one meter pieces yes I highly recommend it
Review translated automatically
Reliable opinion
Adjustments without revelation without comparison to the original but it shines nicely and if the motorcycle is more for enjoying and taking occasional rides by the chimney then it can be
Review translated automatically
Reliable opinion
wsk 125 b3 vintage 1984sci parts are not quite like the orginale but if you give them a little work they are ok, the worst are the brake handles in the wrong place are drilled holes
Review translated automatically
Reliable opinion
Motorcycle Junak M10, year of production 1962 The purchased parts met my expectations. Installation difficult due to the need to put the shock tank paws through the frame.
Review translated automatically
Reliable opinion
I own a 1970 WSK125 B1 motorcycle. Brake cable adjustment well and carefully made, installation went without a problem. The adjustment fits the original clutch and brake handle.
Review translated automatically
Reliable opinion
The kedra itself is very good. The only thing that could be changed is that when you order 2 pieces you get 2 meters in 1 piece, not in two, because then you have to make 2 joins.
Review translated automatically
Reliable opinion
Romet Ogar 205, quick installation that does not require disassembly of the cable thanks to the longitudinal cut, thread that fits without problems, easy to adjust, greatly simplifies use.
Review translated automatically
Reliable opinion
Motorcycle Sachs Roadster 125, the thickness of the spoke fits while I myself made a mistake in the calculation and the spoke is too short. As for the quality, I have no objections. Regards.
Review translated automatically
Reliable opinion
Motorcycle WSK 125 year of production 1976.Adjustable brake-clutch cable fits perfectly, very nice looks and serves its purpose.Highly recommended.
Review translated automatically
Reliable opinion