Motorcycle carburettors - Page 5
Most popular manufacturers
Manufacturer
Price
Sort
rozmiary:
Browse Motorcycle carburettors - Page 5 by manufacturer
Products reviews
2020-03-05, 17:33
Arkadiusz
Moped gb Street 50 , on the old original carburetor muddied up on cold engine. No power despite the adjustments made. Today after installing a new carburetor moped revived, a noticeable improvement in engine performance that I had not decided earlier to make this purchase only agonized and combined like the proverbial horse uphill . I recommend this carburetor. It is really worth it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-09, 06:44
Paweł
My so called hobby is repairing. I currently own 3 motorcycles which are , Romet pony motorynka 1986 year which I have already 5 years , scooter Zipp toxic 2008r in a very elegant condition , and the third scooter jailong monsun is one typically for younger people because it is a little smaller and that's it ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-28, 07:25
Andrzej
scooter baotian 2008 mileage is not great because 8000 km, purchased a better gasifier than the original, very well matched, the quality of workmanship very accurate which allows for ideal adjustment of the gasifier, not what the old. The scooter got a new life, it runs better than after purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-22, 11:52
Maciek
Carburetor in my opinion better than the original. Good fit, quality of materials also not bad. Easy to adjust, tight. Everything in the best possible order
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-20, 11:31
Mateusz
WSK 125 B3 1972 carburetor perfectly reproduced compared to the original no casting errors motorcycle runs evenly and revs up
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 09:39
Mateusz
I recommend the carburetor I purchased the product received as expected I also add that the product is very well protected I recommend Gmoto.pl
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-03, 14:38
Jakub
Very good quality there is no better I really recommend and the price very attractive And in general I recommend this store good prices and quality
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-08, 12:50
Karol
Keeway Hurricane 2t scooter. Carburetor fits as well as possible, very good value for money. I recommend to all buyers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-12, 18:19
Matas
Thanks to this gasser I fired up a mini cross that had stood for 6 years without being fired up. The gasser is very easy to install. I highly recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:00
Monika
Complete 4t carburetor very good quality with attention to detail fits without any problem recommend to everyone fits 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 07:17
Monika
Complete 4T carburetor very well made with attention to detail fits without any problem to 4T scooter I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-06-14, 22:02
Marek
Kingway Fonero 50 year of production 2007 The carburetor I recently purchased passed my expectations I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-20, 08:02
Eric
I ordered this carburetor for a TZR 50 it fits right away I have to say for this price it is really a bargain the carburetor is really cleanly processed it is very cleanly packaged and makes a good impression right out of the box I checked the carburetor before installation. In contrast to the Dell orto, there is even a slosh plate in the float chamber. That makes sense and shows that the carburetor manufacturers really know what they're doing. whether you really need it or not remains to be seen. I was very surprised that the Chat even comes with a set of jets, which is great for tuning - I would order it again and again
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-11-26, 23:02
Mateusz
Motomar Vision 2009r 50ccm3 series .Purchased a carburetor in full working well everything is back to normal scooter stands in the cold after a few days after which it starts without a problem. The only thing is that the slow speed screw at the throttle has a ball end, which is not quite right, but it can be trimmed or replaced with another. Other than that, everything is fully well-fitted installation did not cause any problems and after a long spin the scooter started very nicely.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-28, 20:46
Bogdan
WSK 125 carburetor + cone filter. I could not come to terms with adjusting the old carburetor. The plug was still black. The motorcycle was very " smoky ". After putting the new carburetor on and firing it up, I was finally able to adjust the mixture composition. Nothing tastes like coffee with milk or rather the sight of such a color on the candle after it was removed from the cylinder - finally. I recommend this purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-18, 23:01
SYLWESTER
Hello I have a scooter brand kingway fox 50 2009r 50ccm the problem was with the old carburetor so I bought a new one from (gmoto) packed solidly, the carburetor itself at first glance looked okay performance good, the very assembly ran very easily just plug in the hose with fuel and gas line, twist on the bands and you can continue to chulkać on the motorcycle I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-26, 08:29
Krzysztof
I own several motorcycles to which this carburetor fits mn shl 175W, the carburetor does not work in any motorcycle is badly fitted inside. The insert of the carburetor, the one where the slow speed nozzle is, should be tight in the body of the carburetor, and there is a play of about 1 mm, the carburetor has no right to work.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-02, 15:20
Tomasz
I am very satisfied with the purchase of a carburetor with manual suction 139FMB 4T from gmoto.pl. The carburetor is of high quality and works very well. The engine runs smoother now and I save more fuel. I recommend this carburetor to everyone who is looking for a reliable and efficient part for their motorcycle.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-11, 20:03
Tomasz
If you are thinking of buying this carburetor vs. some other carburetor I had the same thing only I once bought a much more expensive one and a much cheaper one which eventually led me to this carburetor, it's well-fitted and works well on a Yamaha DT 125 (where the original was probably 26mm) I recommend ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-27, 09:37
Robert
kingway euroboy 2T -gas tank that I purchased does not fit my model. After consultation with the seller and removal of the old I ordered another one, I hope that this one will fit. Advice: dismantle the part, check the numbers if there are any, or ask the seller for advice. t
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-22, 13:03
Mateusz
After installing the carburetor motor completely did not want to work, it smoked - died, it was impossible to adjust the carburetor, the reason was a poor quality float (which did not work at all), personally I do not recommend better to put 100 for the original one, although if you have the old one you can assemble 1 of 2
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-01, 22:04
Paweł
router delux1 , 2016r - scooter rides like new on this carburetor is identical to the orginał also do not wonder if it will fit or not because it 100% will. I recommend Gmoto.pl because not only is it a reliable company and very friendly service, and the shipment after shipping on the next day is at the klijęta
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-11-19, 16:37
DURAND
Hello. Adapted to a MZ TS 125 by filing the intake pipe a bit and lengthening the throttle cable travel. In addition, I found the best setting at the 1st notch of the nozzle needle. In conclusion, installation took longer than expected, but the bike runs very well. Best regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-26, 08:05
Łukasz
I am very satisfied with the service of gmoto.pl Goods solid, the one like others which I had the pleasure to order on this site. I have never been disappointed, and most importantly the shipment sent very quickly despite ordering on the weekend. Super. In good conscience I recommend this site to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-10-24, 09:21
Jakub
I ordered this carburetor with a tentative approach. Recently I cheated myself a lot by ordering a carburetor from an allegro, simply not adjustable. And here a very pleasant surprise installed without any problem, a tiny adjustment of revs and the scooter rides until nice. I recommend products from gmoto.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-10, 12:31
Franz-Heinrich
I ordered this carburetor as a replacement for the previous original BVF carburetor and have already installed it. The first start attempt made a good impression, but the adjustment to the carburetor flange (carburetor / cylinder) could be better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-08, 05:04
Ilari Lähteenmäki
The carburettor works like a new, original one and is a perfect fit for my old bike. It was easy to fit and the adjustment was straightforward. I would recommend the carburettor to other owners of old MZ's who want to improve the running of their bike.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-04-10, 11:30
Piotr
Purchased GY6 4T 50 cm3 complete carburetor is a successful purchase and I recommend this product worthily. Very well regulated and works flawlessly, easy to install. Description and fulfillment of the product I put about the price of the 10 highest. Product very good and once again recommend ☺️☺️☺️
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-30, 19:30
Sławomir
carburetor I bought for mz ts 150 , there is no way to fit it to this motorcycle , the diameter of the throat on the crucible does not fit , it is too small by 1 mm, moreover on the nozzle which is in this carburetor motorcycle works only at low speed, the nozzle is too small
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-26, 22:00
Jerzy
Barton Falcon 30, displacement 50cm^3, 2014r, mont without the slightest problems. Some design flaws have been corrected compared to the factory carburetor, even adjustment was basically not required. The quality of the casting itself could be slightly better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-04, 17:18
Krzysztof
For chinchilla 50 4t. It is much better at least with firing. The previous one was already mechanically worn out and that was it. It didn't cure all the problems (such as stalling after quick release of the gas), but this is probably a general wear and tear of everything after 12 thousand. Km.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-06, 09:35
Krzysztof
Carburetor from moretti company, fits interchangeably with "thin suction" carburetors. Designed for Chinese scooters in 2t. The carburetor required minimal adjustment after installation. It has nozzles that work well with the original filter with tube (block).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-18, 18:16
Grzegorz
I bought a carburetor for a 1999 Suzuki Zilion. I am terribly happy with the purchase because I commute by Zilion to work . The engine on the carburetor purchased from you does not snort does not breathe but flies like a bee collecting nectar.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-12-08, 15:29
ŁUKASZ
Chinese QUAD with 139FMB engine of 50cc capacity. The carburetor works flawlessly. Nicely made and well protected for transport. A moment to put it on, pouring fuel iiiiiiii one shot and so much fun. Highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-04, 21:17
Robert
I own a 50cc SIMSON s51 motorcycle, year of manufacture 1986. I am satisfied with the speed of delivery of ordered parts, neatly and nicely packaged. Greetings and recommend shopping at this site. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-28, 09:07
Rafał
Hello. The carburetor arrived in quick time. It fits the model I had before, after installing it along with the newly purchased gas line it ignited after a few seconds despite the fact that the quad had been out of service for almost a year.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-07, 08:30
Adam
The carburetor is good for the price, but it is missing the o-rings on the screws from adjusting the low rpm and the amount of air in the mixture, but for the price, it is really well made, and works very well.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-28, 12:52
dariusz
I own a scooter zipp otis 2t to which I bought a carburetor from company Gmoto.pl with which I am very pleased. Scooter on a new carburetor from company Gmoto.pl goes like a dream I recommend this company to everyone GREAT POSITIVE.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-08-11, 09:58
Tomasz
The carburetor is very well suited for such equipment that has its years . Visually it looks very nice. Due to the fact that it comes with a fuel filter, the carburetor does not get clogged and causes better engine performance.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-07, 18:55
Bogusława
I am satisfied with Gmoto finally a super store you order and there is a quick realization of the ordered product I highly recommend I am very satisfied because I already ordered more than once and did not wait long for the shipment
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion







































