Forgot password
Order status
Free delivery from 150 euro
Motorcycle crankshafts & connecting rods - Page 5
Options +3 
Browse Motorcycle crankshafts & connecting rods - Page 5 by manufacturer
Products reviews
The crankshaft is made really carefully and precisely fitting it in the crankcase is almost perfect.For Romet Kadet fits perfectly will regain its power and will go thousands of kilometers for sure. I will gladly recommend it to others who are going to buy this crankshaft.
Review translated automatically
Reliable opinion
Greetings. I apply the wedge to the shaft of the engine WSK 1969 year b1, the so-called two frame. The product fits well runs well, as everything else set well it does not break off and if it breaks off it means that the settings to be improved. I recommend and greetings
Review translated automatically
Reliable opinion
I own a 1963 shl m11, the bushing is well made, however it is oversized, it is too big for the connecting rod as well as too small for the pin. I would still recommend making a notch on it so that there is lubrication on the pin.
Review translated automatically
Reliable opinion
I bought the shaft from Gmmoto I put it on the engine Everything fits Engine runs like gold The shaft is well made and brewed, nothing beats, no knocking, no rubbing .ENGINE AS NEW I RECOMMEND
Review translated automatically
Reliable opinion
Motorcycle 50M2 1983. Shaft perfect dimensionally. The bearing in the connecting rod head is also quite solid, but it is worth looking for a more expensive equivalent. "Hot/cold" assembly without problems.
Review translated automatically
Reliable opinion
WSK 125 Wedge very well fitted not too big not too small. The wedge is hard and does not wear or break. I recommend my opinion is 10/10
Review translated automatically
Reliable opinion
Hello I own a 1983 WSK 125 motorcycle The shaft is very well made. Assembly went without problems everything is matched. I recommend.
Review translated automatically
Reliable opinion
Wsk M06B3 Wedge very good quality and with the right dimensions Does not differ from the original and fulfills its role in 100%
Review translated automatically
Reliable opinion
Crankshaft Gg6 4t very good class shaft very strong suitable for strong cylinders 90cm I recommend to all
Review translated automatically
Reliable opinion
The crankshaft aesthetically packaged in a cardboard box and styrofoam extrusion arrived with no signs of damage.
Review translated automatically
Reliable opinion
Quality shaft made very well and accurately! There was no problem with seating it in the bearings.
Review translated automatically
Reliable opinion
Romet ogar 205, the shaft is of great quality for such a price shelf I am very pleasantly surprised by it. All dimensions are accurately reflected with the original so there is no problem with mounting in the crankcase or seating bearings on it. The product came neatly packaged in a styrofoam extrusion. I can't help but recommend this shaft to everyone who doesn't want to spend more money on more expensive shafts, but wants to be sure of good quality. The quality/price ratio is very positive.
Review translated automatically
Reliable opinion
The shaft very fit. I even expected that the piston pin bearing would fly loose, and here, slowly and carefully had to be assembled so as not to damage the bearing. This is very much on the plus side! Because a good fit is important here! Is the shaft itself in itself durable? It's hard to say, currently Ogar 200 has already done a good 1,500 kilometers on this shaft with SKF pin bearing and laughs on! :)
Review translated automatically
Reliable opinion
The products that I order from your site are products that I am unfortunately not familiar with, however, in the opinion of my fiancé, the quality and communication with your company leave a rating of 6+. Very fast service understanding and goods of very good quality. All parts that are needed to renovate the mosquito are ordered from your company.I recommend to everyone Best regards
Review translated automatically
Reliable opinion
Jawka 50 23 sport mustang.The crankshaft holds all nominal dimensions.With the installation there were no problems.The engine smokes from the shot, is quiet and has power.Its plus is the needle bearing, which allows you to reduce the amount of oil in the fuel.Another plus is the price.The shaft reconditioning service alone is 100-150 zł.And here for 99 zł we have a very nice shaft.I recommend.
Review translated automatically
Reliable opinion
I own a moped Komar , "stiffyniak," - an heirloom from my dad. Unfortunately, the tooth of time has damaged a few parts in my queen. Fortunately, there is a company Gmoto.pl, which always quickly and professionally helps to solve problems with parts. The last of my purchases included a wedge for the shaft. It fit without any problems, good material - generally ok. recommend.
Review translated automatically
Reliable opinion
The Romet magnet wheel wedge is a reliable component that provides stability and safety while riding. Its robust construction and precise fit make it ideal for owners of Romet motorcycles. Installation is simple, and its effectiveness positively affects the performance and comfort of the vehicle.
Review translated automatically
Reliable opinion
I purchased this shaft for 2008 quest q7 Racing scooter, in my opinion it is really worth making a purchase of this shaft, because the installation went completely without any problems, everything fit perfectly and the most important thing is that the scooter has already done a lot of km on this shaft and does not show any problems, everything runs great simply, I recommend
Review translated automatically
Reliable opinion
A small trinket that should be in the spare parts box of every Komar user. The thing is practically impossible to get in automotive stores anymore, and here you go, it is available. The quality of workmanship is very good, I think that the material is also better than the factory one from several decades ago.
Review translated automatically
Reliable opinion
Ogar 200 The shaft has oversized journals. Too much bearing pressure. The diameters of the cones are too large, so that the gear wheel and rotor do not , "sit," properly. The gear wheel after seating shifted outward 8mm, and the rotor by 3mm. I coped with this by reaming the cones in the wheel and rotor, but it should not be like this.
Review translated automatically
Reliable opinion
Unfortunately I ended up with a defective shaft.The pin did not enter the needle bearing.Fortunately I have a lathe and touched up the bushing(the original Czechoslovakian shafts have such).What next.The engine is assembled and runs nicely, the shaft is not badly made nothing rubs the bearings after heating without resistance entered.Threads,cones OK.
Review translated automatically
Reliable opinion
WSK 125 1984. The wedge requires delicate machining with a file (width), but this is only a plus in this case. We can accurately fit it in the groove. Otherwise, everything perfectly - the quality of the material bdb. Wedges have already worked on several engines hundreds of kilometers and still perform ok. I recommend.
Review translated automatically
Reliable opinion
Romet Motorynka Pony, year of manufacture 1986. The crankshaft fits perfectly, no problems during installation. Quality of workmanship very good. Good packaging for transportation. Instant processing of the order, the goods ordered on Friday afternoon on Monday morning were with me. Applause.
Review translated automatically
Reliable opinion
Mosquito 2330, S38 engine. Installation without problems. The cutout for the wedge precise. It is worth noting that the threads on the left and right sides are the same, in the old shaft on the clutch side there was a smaller thread and thus a different nut. I, through this inattention, had to stop the installation.
Review translated automatically
Reliable opinion
Thank you for the product sent . I have a malfunctioning 1999 arillia RS50 so I need some parts for repair. I could very much use such an injection of money for the repair because I am still a student and not working. The nut fits perfectly . Thank you
Review translated automatically
Reliable opinion
I have a Coliber Classic scooter and I ordered this part because my crankshaft that was already in it was byj.w. "wreckage" fortunately I found this site where I ordered a cheap and very good quality product with very fast delivery I really recommend this crankshaft
Review translated automatically
Reliable opinion
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
Reliable opinion
THIS IS AN INDISPENSABLE SCREW STRAIGHT AT THE CRANKSHAFT MUST CHANGE IT NEW THREAD IS ALWAYS NEW AND THE CERTAINTY REMAINS THAT YOU HAVE CHANGED THE FIT AND SAFETY FOR THE ENGINE I DO NOT EVEN THINK WHAT WOULD HAPPEN IF THE OLD UNSCREWED. I RECOMMEND I NOW HAVE PEACE OF MIND
Review translated automatically
Reliable opinion
Products in very good quality. All of them as good as possible. I recommend !!!If I need something, of course I will order again from Gmoto. The products I ordered are as in the description and very well packaged when it comes to the package.
Review translated automatically
Reliable opinion
Romet Ogar 205 I bought the bearing, because the one that was added to the Taiwanese shafts did not fit the mandrel (too tight). The gmoto employee measured the crank at his place and matched me this bearing "to size". Super thanks for the help! The equipment rides like bad!!!
Review translated automatically
Reliable opinion
Hello I own a supermoto it is a generic trigger sm 50.The wedge I ordered is solidly made,I did not expect such quality. During installation everything went very quickly , no problems with fitting. I recommend this shaft wedge.
Review translated automatically
Reliable opinion
Good morning! The crankshaft works, But on the outside the threads and splines are not of very high quality. When buying, pay attention to the star of the oil pump - they can be different. I did not know this and had to squeeze from the old crankshaft
Review translated automatically
Reliable opinion
WSK 125 year of production 1986 improved the quality of firing , and the overall quality of use since I was doing a general overhaul of the engine , I highly recommend this product , because it is high quality and fits very well with the rest of the components
Review translated automatically
Reliable opinion
Unfortunately, an unpleasant surprise during installation. the bushing did not fit in the connecting rod, while through the hole in the middle of it to put the pin. The outer dimension was larger than the hole in the connecting rod (original) by 0.9mm, while inside by 0.5mm
Review translated automatically
Reliable opinion
Hello, The crankshaft seems to be well made, to be seen in use. Packaging a little short, the connecting rod head was sticking out of the box. No apparent damage. Gmoto, a responsive team, fast delivery. Would recommend.
Review translated automatically
Reliable opinion
Shaft in the process of testing. The cheapest version without fittings. Installation of bearings only "hot-cold". The motor does not have great vibration. It is much heavier than the original, so I do not assess the impact on bearing life for now.
Review translated automatically
Reliable opinion
The purchased shaft wedge for my WSK 125 fits perfectly into the original magnet wheel. The purchased wedge from Gmoto does not create the possibility of breaking the wedge not forgetting the correct installation of the magnet wheel.
Review translated automatically
Reliable opinion
I am surprised. This Shaft is so far no different from the PRL production. I am just ordering a second one because I would rather buy a new one than remanufacture the old one. The plus side of the whole shaft is the price. I can recommend this product
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts consistent with the description and also fit motorcycles fast shipping and fast turnaround time.
Review translated automatically
Reliable opinion
I have a 1981 romet pony motorcycle. i ordered parts for it, which i received very quickly and were very carefully packed. very decent company, which, as you can see, cares about customer satisfaction.
Review translated automatically
Reliable opinion