Motorcycle electrical & lighting - Page 63
Manufacturer
Price
Sort
Browse Motorcycle electrical & lighting - Page 63 by manufacturer
Products reviews
2018-08-30, 12:50
Krzysztof
Hello As for the product re: quality and aesthetics are OK but there is a small but about their fit: I have a reservation about the lampshades that I received from you and namely I received two pieces with different patterns. One lampshade has a circular embossing pattern and the other lampshade is embossed in a pattern of spreading rays. I don't know what the issue is here. Motorcyclist
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-29, 15:28
Patryk
Hello the spark igniter I purchased works very well I only had a problem with connecting to the station because the cables are a different color and with setting the platens. Other than that, the product performs very well I own a simson s51 and with this spark ignites without question Regards. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-16, 17:44
Aleksander
Regulator very well made. It could be a little smaller, it would be easier to install because, for example, in the tropics it is tight under the lid. Moto on the regulator works elegantly, no problems with charging.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-13, 21:08
jerzy
Super case company reliable and fast shipping I highly praise this company and highly recommend. I am satisfied as much as possible with everything I bought everything fits barton ranger clasic motorcycle
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-19, 08:52
Szymon
Kinroad xt 50q - with the installation I am satisfied , but it has one small drawback, it fits only the model with one meter. Everything else fits. The pictures show the cube that is missing.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-22, 11:35
Jarosław
The lamp fits perfectly , cables all as original . The only downside is the loose glass which increases the risk of breakage . (Benzer Texsas 50) My rating is 4/5 :) I recommend !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-11-09, 00:44
Adam
Regulator very good charging has improved immediately much better than the old mechanical possibility of connecting to the installation which has 5 cables to the regulator I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-22, 11:27
Seweryn
Moped Simson s51 enduro N version very good I can recommend but they are not in appearance like the original umnie it could be factory defects but they look good for the price
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-12, 12:42
Oskar
Hello I own a scooter kingway coliber sport and I am satisfied with the quality of the lamp and turn signals , the lamp shines very well you can see the scooter from a distance I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-08-19, 16:54
Ziom
Keeway Superlight 125cc, grille mounted without any problem , Plastic but looks cool. Fits without combining , attached with screws (included)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-03-07, 11:43
Karol
The item gives the impression of being solid. Plastics of good quality, a set of properly matched fuses included. Recommended product
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-04, 12:22
ROMAN
Goods met my expectations well and solidly made on the model of the original installation did not cause any problem looks great
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-24, 23:20
Kacperowsky
Simson s51 enduro 1990 turn signal is really very well made,very well fitted and very good looking
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-14, 07:04
Ryszard
Romet 727 year prod 2010 lamp super fit well made recommend. Lamp complete with bulbs plug fits installation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-06-01, 13:19
Piotr
Cool good and fit material such a good plastic with the installation was no problem (screws in-house)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-25, 22:43
Zbigniew
The lamp is made very well. After it is screwed on, everything fits nicely. There is no problem alby connecting it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-04, 12:16
ROMAN
Merchandise as described looks like the picture.Well and aesthetically made matching close to the original
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-31, 21:34
Sławomir
Simson scooter 1980, quality on 4, used goods or return, because screws violated, fits moped.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-14, 07:41
ARKADIUSZ
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-20, 05:59
Beata
I purchased a 12V turn signal interrupter. The product is solidly made, with durable materials that ensure long life. The interrupter works flawlessly, providing smooth and regular flashing of the turn signals, which improves visibility and safety on the road. Installation is simple and intuitive, compatible with most 12V systems on motorcycles and cars. Aesthetically it looks good, its small size allows it to be discreetly placed in the vehicle. The product is reliable and weatherproof, making it a great choice for anyone looking for a durable and effective solution for their turn signal system.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-08, 22:07
Rafał
This installation is some kind of farce.the wires from the stop sensors too short, the only thing that matched was the entire rear with directions. I'll give a plus for the fact that there is an additional wiring to the ignition, in fact, I do not know why, ignoring the colors compared to the original installation, because everyone can guess and connect according to themselves. The manual itself, too, is a piece of cake, in fact, I do not know why it is there, it is the usual platinum connection to 6V. Those who have the usual platinum sim will be satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-17, 19:50
Michał
Hello I own a total Simson SR 50 (scooter), which was manufactured in 1993. Despite its years, thanks to the good products I purchased from Gmoto.pl store, it has regained its early efficiency. Elba 6V Simson after purchasing by me fulfills its given role with which I am very satisfied and is not difficult to install. You can see that, the parts were very well made. I would recommend this store to other buyers because of the reliability of the purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-18, 16:50
Dominik
I ordered it not for mz-ki but suzuki ts 50 xk with 6v installation and as far as I know it should go up ( if it is like this:wzb.-voltage not reduced,szcz.-mass,+6 to the ignition and to the battery),the quality of the product is satisfactory but I recommend those who are considering buying to see the dimensions because it is easy to miss and then there may be a problem with the installation (it is quite large).Here is a link to the topic on the forum in which it is described how to connect.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-30, 09:48
Jacek
The spark gap for this price is quite Ok. (although it would be good to additionally varnish/protect the coils) After taking measurements in MY copy, all of them almost perfectly hold the standard, both resistance and generated voltage. The coil responsible for charging and the stop light, when connected by a rectifier block, gives 1.4A at idle and 1.8-1.9A at full speed.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-22, 11:53
Arek
I recommend this model of Polish regulator. It is much better than the blue one on 5 contacts! Charging is very good 12,6 - 13V at idle (on the blue regulator it was only 11,5 - 11,9V). The voltage regulator works great. I also have the same one in my other motorcycle and have been riding it for more than 9 years without failure! I highly recommend it! My motorcycle is a Mz etz 251 1990r
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-06, 16:45
Filip
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-08-12, 15:34
Boszu
It's cheap, quality is average, but for the price it flashes. If you do not require it to be a one in 10 years purchase, but something that is expected to withstand the conquest of the review and the first encounter with another hard part after which it will break. This I think can be recommended. ^^ A good option for inexpensive restoration of equipment that is expected to stand more as an ornament than if used. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-21, 16:50
DARIUSZ
Interrupter decent, when you turn on the turn signal works without unnecessary delay. Workmanship as precise as possible. It works flawlessly. Terminals made very well, the connectors stick like glued, They are wide enough that you have to use force to slide the connectors onto them, which is a great advantage. This is a really solid and refined design.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2014-10-17, 17:16
Wanda
Despite the opinions presented by dissatisfied customers I decided to complete the order.I am pleasantly surprised by the speed with which the order was completed,the goods were carefully secured and consistent with the order.Let's hope for more such companies with THAT kind of service.Best regards to all those who will use Gmoto.pl company thanks to my opinion.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-15, 18:48
HENRYK
I have a 1962 WFM motorcycle with an S 34 engine, and I want to bring it to working order. When buying, I need to be guided by the selection of parts from SHL and WSK 175 motorcycles. The platinum ignition interrupter I purchased fits my vintage motorcycle, although it differs in the attachment of the scraper felt. The felt on my S34 is attached separately.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 08:57
Kamil
I've been putting together a 1983 Etz 250 for a few days for a neighbor who is the first owner of this beautiful motorcycle. Unfortunately, the blinkers were not working, it turned out that the fault was the turn signal interrupter. Immediately with help came ,,gmoto,, fast delivery super workmanship, easy installation and beautiful aesthetics. Until it is nice to repair the motorcycle!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-02, 08:24
Bartłomiej
Jawa 350 model 634 1983. The voltage regulator does its job,finally the charging returned,so I can enjoy the ride. Assembly to this motorcycle requires drilling a new hole in the mount,as the existing ones do not coincide with those present on the motorcycle. Other than that, the installation is successful. I recommend this product !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:41
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-03, 20:36
Jakub
Simson S51, 50ccm, 1989. I recommend the 12V bottle ignition coil, very easily and successfully passed the installation. The product 100% fulfills its purpose. You can see that the coil is decently made. The only drawback is the execution of the thread on the terminals 15 and 1 but just re-thread and it is ok. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-30, 14:53
Grzegorz
My Simson S51, in which the turn signals were not working properly, did not look good. Diagnosis ? Replacement of Elba, which was delivered in express time and performs its task without reservation. Installation very easy, took literally a minute. At last I can safely go on the road :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-26, 22:00
Krystian
Purchased electrical system and the diagram included in it perfectly fits Simson S51 . We can connect everything ourselves and do not look on the Internet for the diagram we need to connect the installation in the motorcycle . The diagram is clear so no one has to think how to do it .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-05, 06:32
Stanisław
Simson lamp headlight grille is not only an aesthetic element, but also a functional accessory that increases the safety and durability of the headlight. This is a recommended product for all owners of Simson motorcycles who want to combine style with practicality. I really recommend it!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 08:18
ROBERT
Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 10:51
Piotr
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion













































