Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2018-08-20, 14:25
Maciej
Everything ok, I recommend for CB500 - fits perfectly. The heat sink provides adequate cooling, the factory one did not have it and there was a problem.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-12, 18:15
Artur
About a year ago I installed a colleague in a Honda CB500 - probably 1998.To this day he does not complain. Recently another colleague had a charging problem (also CB500, 1999) and asked for advice (the previous regulator - "more branded", read much more expensive - seemed to overcharge the battery [colleague's opinion, I did not check]. It turned out that everything was OK, the one evaluated remained stock). In both cases, the spacing of the mounting holes did not fit very well, but it's 0.6 mm max - just "lick" the housing with a suitable conifer. There could be a little more charging voltage (original :14.5 V, evaluated : 14.17 and 14, 22 V - two copies). If someone "embraces currents" and would like to check the reg. "dry", just like the "classic" ones. - regulated power supply, bulb voltmeter - then you may be strongly surprised. But after installation in the motorcycle everything OK. Probably some "more advanced" technology (perhaps - it's a little undervoltage is also not always so ?) Considering the price / quality ratio - I recommend. In general - in Hondas (at least of these vintages) you need to take care of the charging installation. Most often the problems begin at the connectors of the 3 yellow cables from the alternator. Corrosion, oxidation, increase in resistance, overheating, the rectifier-regulator begins to overheat, the internal electronics fall apart, no longer regulate the voltage and we have a "bubble" from the battery. It is worth checking these areas carefully. With Hondas (CB500, Transalp) I have done a little more than 80 kkm, and also a little at colleagues' repair.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-09, 16:02
Maciej
CPI Popcorn 70 2003. very good bulbs in the price-quality ratio, definitely met my exorbitant expectations, 6 leds give a very strong light, white light that can be seen from a long distance even in the day. Banal even installation. Shipping immediately! I highly recommend these bulbs. Gmoto never disappoints its customers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-19, 17:00
Przemysław
Honda CB 500 S, 1999. Before replacement charging only above 3000 rpm at slow 12.3 volts without load, after replacement 14.3 volts after load 14.1-14 volts (you would have to check the battery and the pradnic-alternator itself before you proceed with the replacement) In summary - good purchase quality / price I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-09, 22:42
JOHANNOT
the product was received in good time, the product was well packaged, the product is mounted in place of the original. it works correctly for now. best value for money for this type of bulb!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-11-29, 12:48
Agnieszka
I am pleasantly surprised by the amount of light generated from such a small source, in my scooter now the position " can do for daytime". I recommend the purchase and the seller this is not the first time I am satisfied with my purchases.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-30, 19:19
Michał
After ordering the product, I did not expect to get it earlier than it was described, I got the product 1 earlier than the scheduled delivery, the product well protected in the shipment, it works flawlessly :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-12, 14:53
Marian
The starter relay is applied at the power on 80 A as much as possible meets the parameters. Very fast delivery thank you. Greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-03, 20:01
Adrian
Very good article goes great mounted on zr7 starts first time, apart I bought clutches springs and gaskets and everything went perfect. Thanks
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-25, 11:33
Damian
Voltage regulator for Honda NSR 125 is very good it is easy to install the cubes fit perfectly good current feeds just buy and ride.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-29, 07:14
RITXAR
It fulfills its function. Well packed and without loss of liquids. It shows power when starting the SUZUKI 650 V STROM DL K5 motorcycle.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-25, 15:46
Franck
Very pleased with my purchase, good inexpensive battery with charger does the job well on my quad, will see over time...
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-02, 15:08
Ramon
All correct as seen in the advertised image, but the delivery was out of time indicated.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-08, 16:46
Bernhard
Satisfaction with everything.?Good communication, fast delivery.relay functional and type viable,as the seller states.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
























