Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
Romet Motorynka 50
Options +3 
Browse by manufacturer
Products reviews
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
The holder solidly made thick plates with a special slide-out. The holder for p21/5w bulb touches both plates on the sides and style and the bulb shines on 2 filaments. The quality is very good, you can feel that it is not the cheapest holder, but well made and fitted to the lamp. I sincerely recommend and Greetings Marcel Blacharski
Review translated automatically
Reliable opinion
Romet komar 2350 - unfortunately the workmanship is terrible, the ignition fell apart during assembly, gmoto company felt responsible and refunded part of the money. I had to assemble the ignition from old parts. I asked for attention to the quality of the parts.
Review translated automatically
Reliable opinion
The purchased headlight glass is of the highest quality, without any blemishes, in short the original . Exemplary workmanship, finish safe for the user. Dimensions in accordance with the description. As you can see from the photos wide application.
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
Romet ogar 205 year 1986. lamp fits, very good workmanship everything works electrics perfectly routed inside, i recommend this lamp similar to prl lamps
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
I was looking for a long time for a good lamp for my Romet naazczescie found on gmoto. Assembly banalbie simple and satisfaction guaranteed.
Review translated automatically
Reliable opinion
The lamp is very close to the original from the era, it fits perfectly on my 1970 Komar 2330 which I am currently restoring.
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
Komar 2350 , lamp very nicely made , almost like the original, the lamp seems a little smaller
Review translated automatically
Reliable opinion
Motorcycle M2.The lamp is very well made,shines nicely.The price-quality ratio-revelation.I recommend the purchase !
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
The lamp is identical to the original. Plastic and glass parts well made, precise finish. The lamp comes with a clear instruction manual with cable numbering, which helps when connecting. The lamp also has a light switch and an ignition switch, so we have the problem of an additional element out of the way. When assembling, you need to pay attention to the attachment of the cover of the optical element, you can use a rubber mallet for this, because pressing by hand will not do much. In addition, you should take care to clean the holes of the metal plates in the frame (those to which you mount the lamp) so that there is a connection with the ground. It would be worth the lamp to add new mounting screws (screws from an old romeet spoil the effect, collectors know what I mean:), bulb and gasket for the counter. Often when ordering this is forgotten. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
Romet Kadet, the interrupter looks good at first glance, however, you need to work on it so that there are no problems with it. First of all, tighten the locking plate on the side and strike the rivet which holds the part isolated from the base in one place (in my case it worked on this rivet and caused short circuits). The second thing is to bend the spring from the toothbrush like the original so that it does not go into the holes, but falls into a certain place locking on them (U-bend where it enters the hole). Adjust the curvature of the anvil to the toothbrush by appropriate bending (in my case it went that oblique). And the last thing is to throw away those plastic insulating washers and buy thin ones made of rezotex or ebonite ) to match the height of these washers to the anvil.
Review translated automatically
Reliable opinion
Romet moped bell in chrome is a sturdy, easy-to-install accessory, perfectly matching the motorcycle. Its loud sound ensures safety on the road, attracting the attention of other traffic participants. Aesthetically, it looks great, adding elegance to the appearance of the moped. It is a practical and stylish item worth having, especially if you want to stand out on the road and emphasize the character of your vehicle. Its versatility makes it fit a variety of moped models, making it an even more valuable accessory. Highly recommended :)
Review translated automatically
Reliable opinion
The product made in very good quality. I was very surprised by the quality of the cables, they are very soft by which they are flexible, which means that they can be hidden in an invisible place. very nice and aesthetically pleasing workmanship, until it is a pity to cover with a cover. Installation very easy, even 0 setting, installation and the motorcycle fires up. Much more convenience than ignition with platnki. For a minor minus I could add the installation of the ignition coil on the tritite, a little incompatible with the high quality workmanship of the product. Overall, the product is very good, driver-friendly.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The interrupter has a German TUV certificate, this is always a guarantee of quality. After installation and ignition alignment, it works as Predom Romet factory ordered. During installation I had a problem with the pin on which the interrupter is seated (I detected a small play, meanwhile it should not be there, the pin should be mounted at a right angle of 90 degrees, a little tinkering threading and the problem eliminated). Romet Ogar 205, year of manufacture 1987.
Review translated automatically
Reliable opinion
I own a Romet Kadet and decided to restore it, the problem turned out to be the lamp which did not survive the test of time fortunately at Gmoto I found what I was looking for although I was not sure if parts for such old mopeds are available, installation was easy put the bulb in, connect three wires and you can ride, the quality of the lamp is very good and delivery to the house was fast and also trouble-free I recommend.
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion
This fits to Romet Motorynka m301 well. The length is a bit more than original, but no problem. I had two issues with this one: - the switch did not work. A connection problem. Had to remove the switch and do some solving. - The blue wires are not connected to the ground. For some reason the wires do not touch the connection bolt mounting. Need to fix that.
Review translated automatically
Reliable opinion
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
Reliable opinion
The lamp as described differs slightly from the original at least the one I had that the top of the lamp is straight and there is a slightly rounded. When tightening this rubber to the fender, I advise you not to exaggerate with force because it is quite flexible and later you have to work hard to fit the lampshade. If you do not exaggerate with the force of this rubber, everything fits perfectly.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
I purchased a lamp for the legendary motorcycle m1 from the '80s, the lamp meets my expectations 100%, also perfectly matches the original bracket (installation very easy, took me only 10 minutes) The lamp is no different from the original. I recommend gmoto.pl you can buy here everything for your favorite motorcycle and more :)
Review translated automatically
Reliable opinion
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
Reliable opinion
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
Reliable opinion
I own an 89 ogar, this item 100% reflects the original, with the installation was not the slightest problem, the included instructions did a great job. The lamp in perfect condition was delivered in a very fast time. On Monday it was shipped, and on Tuesday it was already at my place.
Review translated automatically
Reliable opinion
A very useful detail in the electrical installation of my motorcycle. The use of this part makes the installation look complete, previously such a "dot over the i" was missing. Of course, it also performs the function of protecting the switching contacts from external factors. I recommend
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
I am the owner of a 1986 Ogara 205, the product purchased from you - Romet front lamp is identical to my old damaged one. The quality of workmanship very good, and above all, it fits perfectly. Shipping promptly from Gmoto website, for this an additional plus. Regards
Review translated automatically
Reliable opinion