Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts - Page 65
Manufacturer
Price
Sort
Options +1 
Browse Motorcycle engine - parts - Page 65 by manufacturer
Products reviews
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
Reliable opinion
SHL M11 175cm3 1964. The kit met my expectations.I had no problems with installation. The engine works very well, has a very good compression.From the appearance indistinguishable from the original and even I am tempted to say that it looks better.I recommend a good alternative when the original cylinder is no longer suitable for further grinding.
Review translated automatically
Reliable opinion
The motorcycle I own is a WSK with a capacity of 125 It is a very good and easy to repair motorcycle. Thanks to the parts I ordered from you the motorcycle works very well I am 100% satisfied with the workmanship and quality of these parts.
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
SHL M11 ( 175cc) , prod year 1963. - Discs of very good quality , no problems with installation . The clutch got a second youth! - Highly recommended. LWG!
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
Product very well made great fit for motorcycle with 139qmb gy6 engine. The description of the goods is very accurate and with the real.
Review translated automatically
Reliable opinion
My engine had to be renovated with new crank, cylinder and piston also bought oil pump, so bought gasket sets for the entire engine. Jan
Review translated automatically
Reliable opinion
Cylinder MCN 80cm3 4T cylinder a very good class cylinder gives a lot of power I recommend to all who want to increase the capacity of the scooter recommended
Review translated automatically
Reliable opinion
Romet pony clutch discs good quality everything fit without reworking after assembly clutch works well
Review translated automatically
Reliable opinion
Was a good product got a ton of mileage and worked everything fit as it should and never leaked anywhere from you easy to order.
Review translated automatically
Reliable opinion
One gasket was only needed , and I think there will be an engine overhaul soon , so the rest will come in handy.
Review translated automatically
Reliable opinion
I own a motorcycle SHL model M11 capacity 175 ccm from 1967.I purchased in Gmoto a set consisting of a cylinder, piston, ring pin and seals in the hope that after replacement there will be no problems with seizure of the whole. And I was not disappointed. The whole thing came in a sturdy package with a Styrofoam insert. The cylinder casting was neatly machined and was well-fitted to the piston (an unmounted piston in a vertically aligned cylinder sinks slowly with small jumps). The piston had a nicely machined arrow (not all new Far Eastern pistons have one) and was very well fitted to the pin. Organoleptically, I found that the quality of the materials was flawless. But the most important thing turned out to be the operation. After installing the whole thing in the motorcycle and running-in, there is no problem with starting the engine, there is power and, most importantly, there is no engine seizing and blocking. Hence the conclusion that the whole thing was made of decent alloys.I will only add that so far I had installed a new cylinder and piston probably of Chinese manufacture purchased on a well-known auction site, the name of which I will not mention. Due to the poor quality of the material and high thermal expansion of the metal used, the piston often seized in the cylinder, which made further driving impossible. Ultimately, I believe that the proposed kit is a very good choice.
Review translated automatically
Reliable opinion
Manual gears in the Mosquito everyone knows and their ills too, so I did not expect miracles. My problem was a molded insert, but since I'm trying on a general overhaul I ordered the whole thing hoping that in the end I won't have to fight with the gears. After the first inspection, the quality of the alloy (aluminum?) does not throw off the quality seems quite fragile. This was confirmed during assembly. After assembling it came the moment to tighten the whole thing rigidly to the steering wheel. Unfortunately, I used too much force and the clamp that holds the menatke to the steering wheel shot off. Also, I caution against this, tighten with sensitivity! The whole thing makes up for it with a good fit, no extra drilling, grinding, etc. All screw locations drilled properly. Assemble, lubricate, lightly adjust and the gears go in smoothly, smoothly and, most importantly, do not fall out. Overall at this point I am satisfied despite the adventure with the clamp, we will see how the alloy will stand the test of time and miles.
Review translated automatically
Reliable opinion
Romet Kadet, engine 023 The clutch fits without reservation. When replacing the clutch you need to remember to pre-soak the disc in the oil in which it will work (in my case Lux 10) and to distance the basket from the simmer with a special washer. In my case, someone once forgot about this washer and the basket rubbed against the transmission. It is also worth buying a new shaft nut protection . After the proper insertion of the clutch press the spring and analyze the pin heads in the direction of rotation of the shaft . Well, and remember to readjust the cable after installation. I rate the quality and fit of the new clutch positively, at this price it is not worth buying individually, better as a set.
Review translated automatically
Reliable opinion
Very great when I ordered I was afraid that it will not go to the ATV125 engine quad because of one seal that is in the whole and I have a piston but perfectly fine and I put it there, the seal looks the same as in the photo fast delivery and I also got a sticker that goes right on the quad super seal super price well just for me great
Review translated automatically
Reliable opinion
The clutch disks were delivered incorrectly. The quality corresponds to the price. The subsequent handling with the service department was very poor. I have still not received the correct clutch disks. In the meantime, I got the plates from another supplier. Unfortunately, I cannot therefore recommend Gmoto.
Review translated automatically
Reliable opinion
Yamasaki Kingway: -the seals fit 90% perfectly in the holes, on the angles -they are well made (difficult to break, not too hard) -better quality valve seals are included in this kit relative to those sold separately -you have to be careful when opening the contents - it is not very pleasant
Review translated automatically
Reliable opinion
Generally everything is ok. except that for pocket bika when repositioning the cylinder it turns out that the original engine does not fit the bearing on the pin. The piston and piston pin are slightly larger, which makes it impossible to change.You still need to buy separately the appropriate bearing to fit the piston pin that we ordered.
Review translated automatically
Reliable opinion
I bought this set for my 1989 fireplace and frankly I am satisfied, I was not disappointed, the quality of materials is very good, solidly made, the fit is also perfect and aesthetics, I already know where I will order parts all the time, I highly recommend and greet you! :D
Review translated automatically
Reliable opinion
Very good workmanship, fit to the handlebars - the quality of the chrome handle satisfactory, I really wondered about the fit to a 30-year-old moped, but I rate 5+. Nothing is damaged, does not break off if only the installation is correct according to the art. Recommended.
Review translated automatically
Reliable opinion
ROMET CRS 50 (1997) with a HONDA MX 124cc engine from 1974 (and only 1 overhaul !!!) ŻBIK BOATIAN 49 . (WAS ) NOW IS 80cm3 2005 YEAR. KOMAR 49 1972 VINTAGE RIDDEN AFTER 3 ENGINE OVERHAULS .FACTORY PAINTING
Review translated automatically
Reliable opinion
Moto Ventus Sport 4T year 2007 gaskets are very good quality,they are very well cut,not damaged,they are very well fitted to the engine housings,MCN gasket company I highly recommend,engine not thin you can see that the gaskets are of good quality pozdrawiam
Review translated automatically
Reliable opinion
Quad ZIPP ATV KID 110. all gaskets fit perfectly. Until I was surprised myself, because always when I ordered from any other store something did not fit. Compliance with the description. Gaskets 100% tight and dimensionally correct. Thank you for the service and RECOMMEND!
Review translated automatically
Reliable opinion
Gmoto has a good quality foot starter, I myself own this one and I am a proud as well as happy owner of it, I am satisfied with it because it is made of good quality as well as it is very durable, I recommend this carrier starter to everyone.
Review translated automatically
Reliable opinion
The clutch fits and goes elegantly. Which is not obvious in replacements. I recommend. For how long it will last no one knows. Information for people. Remember to soak the discs in oil before installation overnight, so as not to burn the clutch.
Review translated automatically
Reliable opinion
Shl m11 1963. kit recommendable, shl after installation fired up from the first, the piston does not swell, and before that they made me grind the original and it was impossible to drive the engine locked up. If I had known I would have bought this kit right away.
Review translated automatically
Reliable opinion
Nice product, solid cylinder good piston for two rings. Everything you need is included even a sleeve for the exhaust to increase the diameter. Good price. In my opinion, the most reasonable purchase will be this kit.
Review translated automatically
Reliable opinion
Kingway XT50Q converted to 110cc. Gaskets fit perfectly are very well made without any imperfections come not deformed. Assembly is quick and efficient because everything fits nicely :D I recommend.
Review translated automatically
Reliable opinion
products shown in the photo differ from the delivered shipment, for example, bearings the quality of manufacture of the cylinder gives much to be desired bad casting, grinding done probably with a concrete mixer sea you do not have a quality controller.
Review translated automatically
Reliable opinion
Cylinder ok, carburetor ok, piston ok, bearings shoddy failed to install them on the Shaft during installation was damaged, no sealer for the output shaft for this bearings two, seals of carburetors tissue paper.
Review translated automatically
Reliable opinion
Hello I have a motorcycle zipp pro 50 and the Cover fits perfectly. As for the workmanship I have no complaints because it is decent and quite hard made of aluminum. I recommend this product because it is worth buying! Great!
Review translated automatically
Reliable opinion
All the gaskets matched the Chinese 110 engine, all I had to do was lubricate with tavot, arrange and fit and finally tighten. They hold compression great, nothing leaks. I highly recommend :)
Review translated automatically
Reliable opinion
I recommend the gaskets because they fit nicely on the crankcases, nothing leaks generally at such a price it is difficult to get a whole set of gaskets and especially when it comes to workmanship.I am satisfied
Review translated automatically
Reliable opinion
left side crankcase looks perfect for the right side crankcase I even got a needle bearing for the set, which I didn't even write anything about getting, but thank you very much it was very useful
Review translated automatically
Reliable opinion
Excellent product has served me for my four-stroke scooter g y6 engine and perfect perfect perfect I have come out very good it has served me it has fit me in the engine very well very perfect.
Review translated automatically
Reliable opinion
Products very well made and most importantly cheap!!!The only store where I buy parts for many years .I am very satisfied and sincerely recommend to others.Greetings!!!
Review translated automatically
Reliable opinion
The product keeps its promises, there are no unpleasant surprises. So far the quality seems to be good, but time will tell how long it will last.
Review translated automatically
Reliable opinion
Zipp Steed 50 capacity 50ccm converted to 80 ccm set of gaskets ok all fit carefully matched dimensions engine does not leak when assembled on these gaskets.
Review translated automatically
Reliable opinion
I don't have a scooter but the parts fit a diesel water pump. The installation took place a few days ago everything is running smoothly. With these parts will be able to water the crops.
Review translated automatically
Reliable opinion