Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts
Romet Komar 50
Manufacturer
Price
Sort
Options +4 rozmiary:
średnica:
średnica:
średnica:
rozmiary:
from 3
Browse by manufacturer
Products reviews
The piston installed in the engine S38 003. Included in the kit is the piston, rings, pin and safety features. Installation of the piston went without any problems, the pin goes in with a finger as it should be which pleased me. There is an arrow on the piston, which must be towards the exhaust which makes it easy to install and you don't have to look for where the front and back. Under driving, the piston does not swell, it rides very well, the rings hold and the piston itself is so well made and welded that the engine does not heat up excessively during prolonged driving. Compression is exemplary and the engine has plenty of power. I rate the quality of the piston, fit and aesthetics at the highest possible level, as this piston does its job 100%. I recommend it as highly as possible.
Review translated automatically
Reliable opinion
Hi to all owners of Romet mopeds. I own a 1985 Romet Pony 50-M-2 50ccm moped. I recently purchased a Romet magnet wheel puller to do a minor repair on my eyesore
Review translated automatically
Reliable opinion
The piston in a nice manufacturer's box, which positively surprised me.The piston is not objectionable visually,in a nice polished finish: a set of rings, pin protection and a pin that has a good fit.Price very cool.
Review translated automatically
Reliable opinion
Romet 205 2b. It looks very massive and I don't see any weak points. Tested so far on a dozen "kicks" - Works ok, the frets fit perfectly with the new shaft. A little rubber deviates from the standards of the "classic", but it is ok.
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine--As original, top of the bolt flash which also looks cool,it is worth buying the old ones are often battered battered from the keys.I got a better product than I imagined.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine All is well with it, symmetrical ie equal length of material all around which for me is a big plus ,fits and fulfills its tiny role.Well packaged.
Review translated automatically
Reliable opinion
Komar Sport year 1975 model 2361 poj 50. bushings made of good materials, fit perfectly (engine S38 egg). After lubricating the rubber part with oil, the bushing enters without problems. I recommend
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
Well, I buy a lot of products from this store , I have never yet been disappointed parts well welded, very good quality, in good conscience I recommend parts on 6+. Greetings Kacper
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine---The bolt is nice and good looking with a washer included, worth buying if only for the sheer aesthetics and good non-fatigued bolt head edges.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine Everything fits well looks fulfills its purpose, well packaged, always buy to spare and it is always good.
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
The discs I purchased are excellent. After putting them on, you can see a significant difference in the performance of the clutch. Workmanship in good condition. I highly recommend :))
Review translated automatically
Reliable opinion
Very good workmanship heartily recommend. These clutch discs for rometa 50t1 or ogar 205 and motorcycle I am very satisfied. With the workmanship.
Review translated automatically
Reliable opinion
Clutch discs recommendable quality of materials as well as workmanship is at a high level. Thanks to these discs my Romet Kadet regained its power.
Review translated automatically
Reliable opinion
Romet Komar 2351 year 78 The head looks super. The threads very nice from underneath nicely plated gasket will fit very nicely
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine--As original only ze new, it is worth buying because it can wear out, no reservations.
Review translated automatically
Reliable opinion
Like any product in the store - good. The price corresponds to the quality, the product does its job. Identical to the original. I recommend.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine---Fits and performs as it should always buy a spare.
Review translated automatically
Reliable opinion
Package ordered to the Netherlands arrived in 5 days very quickly and efficiently I recommend I will start renovation of mosquito 2352w right away
Review translated automatically
Reliable opinion
It is ideal for a Romet komar motorcycle. The workmanship quality is very good. The dimension is good. I recommend
Review translated automatically
Reliable opinion
Romet Ogar 205, ideal when overhauling the engine, new kit well made fits perfectly.
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
All git except what's in the picture
Review translated automatically
Reliable opinion
Manual gears in the Mosquito everyone knows and their ills too, so I did not expect miracles. My problem was a molded insert, but since I'm trying on a general overhaul I ordered the whole thing hoping that in the end I won't have to fight with the gears. After the first inspection, the quality of the alloy (aluminum?) does not throw off the quality seems quite fragile. This was confirmed during assembly. After assembling it came the moment to tighten the whole thing rigidly to the steering wheel. Unfortunately, I used too much force and the clamp that holds the menatke to the steering wheel shot off. Also, I caution against this, tighten with sensitivity! The whole thing makes up for it with a good fit, no extra drilling, grinding, etc. All screw locations drilled properly. Assemble, lubricate, lightly adjust and the gears go in smoothly, smoothly and, most importantly, do not fall out. Overall at this point I am satisfied despite the adventure with the clamp, we will see how the alloy will stand the test of time and miles.
Review translated automatically
Reliable opinion
The kickstand for a Romet motorcycle is an indispensable component for easy engine starting. Its solid construction guarantees durability, and its fit to the motorcycle makes it easy and convenient to maneuver. Aesthetically, it looks good, adding character to the motorcycle. Thanks to the kickstand, engine starting is fast and trouble-free, which is important especially in more difficult conditions. This is a practical and functional item worth having, ensuring that the motorcycle will start without problems every time. I recommend
Review translated automatically
Reliable opinion
romet pony m2 head gasket is made in good quality and fits well and what's more I know that 2 weeks ago I bought a gasket on allegro and that one was of such poor quality that at higher speed as well as with higher engine speed it was simply blown out and I had to drive my motorcycle I was very pissed but my friend recommended me this site and I bought a gasket here and I will tell you that my friend has had a gasket bought on this site for 2 years and everything works fine I just recommend it
Review translated automatically
Reliable opinion
I bought a flywheel puller for rometa I have a motorynke and ogar. The puller made solidly is exactly the same as in the picture when ordering. I bought in general a few other parts and I am also satisfied. I already have an account on Gmoto and I will definitely shop again, the pluses are solidly made parts at a good price, fast shipping, solidly packed package, the ability to buy most parts in one place, ease of product selection and ordering. I highly recommend the store !!!
Review translated automatically
Reliable opinion
Let me start by saying that I made a gift to my son - the purchase of a motorcycle. It is known that I wanted a motorcycle in the original - not after renovation. It is known that Romet in the original has to break down. I found G-moto. It is clear that you can not get along with everyone, but you can piss everyone off. But not with them. I ordered a lot of parts because you need to protect yourself. Shopping here is a pleasure and each part seems to be tailor-made. And delivery-practically overnight. You guys are great. We need such sellers.
Review translated automatically
Reliable opinion
Hello not long ago I ordered from Gmoto magnet wheel puller for Romet Ogara 205 is perfectly matched the quality of the product is very good the fit is perfect and the aesthetics is very good. If you order what is in the picture it comes to you without any deception Gmoto website is very good and I hope that the store is like that will continue to be a nice shopping and greetings LwG for all motorcyclists.
Review translated automatically
Reliable opinion
Romet komar 1975, I ordered from this exact link the clutch twice in two separate orders. One came perfect, the other was so large that it completely did not fit and had to be carved. Overall the quality of the plug jesy very good. I suspect that the whole problem stems from the fact that parts for old romet engines are mixed up, and should be segregated by engine model, not motorcycle model.
Review translated automatically
Reliable opinion
When ordering this product I was going to get a SEGER RING !!!(it's a kind of circlip which has a slightly different look and in some cases is a better solution than the usual protection) And I got what ? the usual pin protection which you get together with a new cylinder and piston in a set . So that how to sum it up what is in the picture is not what I received. So I do not recommend !!!
Review translated automatically
Reliable opinion
romet ogar 205 1987 i bought a set as shown in the picture but after it came to me i saw that there are two screws missing between the crankcases and there are more screws for the ignition caps/clutch cover apart from that it is very well made strong it is hard to tear the thread and actually you can tear the thread in the crankcase sooner than on the screw i recommend the material of workmanship but there can be a mistake and you can get the wrong number of screws
Review translated automatically
Reliable opinion
I own a moped Komar , "stiffyniak," - an heirloom from my dad. Unfortunately, the tooth of time has damaged a few parts in my queen. Fortunately, there is a company Gmoto.pl, which always quickly and professionally helps to solve problems with parts. The last of my purchases included a wedge for the shaft. It fit without any problems, good material - generally ok. recommend.
Review translated automatically
Reliable opinion
The Romet magnet wheel wedge is a reliable component that provides stability and safety while riding. Its robust construction and precise fit make it ideal for owners of Romet motorcycles. Installation is simple, and its effectiveness positively affects the performance and comfort of the vehicle.
Review translated automatically
Reliable opinion
I have a Romet ogar 205 motorcycle which I have owned for a year but unfortunately it started to break down, so I went to the website and ordered a new shaft because I would have had it on my last breath, and I must admit that for this money I could not expect that this part will be so well made in relation to the original
Review translated automatically
Reliable opinion
A small trinket that should be in the spare parts box of every Komar user. The thing is practically impossible to get in automotive stores anymore, and here you go, it is available. The quality of workmanship is very good, I think that the material is also better than the factory one from several decades ago.
Review translated automatically
Reliable opinion
Hi. I own an Ogar 205 moped and during an engine overhaul I purchased these bushings because they needed replacing. The quality of workmanship is really at a high level thanks to which there was no problem with the installation. The engine sits rigidly in the frame and you don't feel vibrations while riding which was the case before replacing the bushings.
Review translated automatically
Reliable opinion
Hi. I own an Ogar 205 moped and during an engine overhaul I purchased these bushings because they needed replacing. The quality of workmanship is really at a high level thanks to which there was no problem with the installation. The engine sits rigidly in the frame and you don't feel vibrations while riding which was the case before replacing the bushings.
Review translated automatically
Reliable opinion