Forgot password
Order status
Free delivery from 150 euro
Motorcycle fuel system - parts - Page 32
Options +1 
Browse Motorcycle fuel system - parts - Page 32 by manufacturer
Products reviews
Good morning I wanted to share the quality,fit and aesthetics I have a 1977 jawa 50 mustang motorcycle The quality product is super better napweno than the stock one. Fit: there was no problem with the fit on the lux no play. Aesthetics: it is made better than many Chinese carburetors, no fuel escapes anywhere. There are no such things as shortcomings scratches etc it is made super I recommend buying this carburetor to anyone I am very satisfied with the product 10/10.
Review translated automatically
Reliable opinion
My motorcycle is a modern version of the Verkhovina, from the old model remained the frame which I had to rework for the new engine, the couch but also reworked, and the tank for which I needed a faucet with an M14 mount. The suspension, wheels and the rest of the accessories are brand new. Buying parts for this reason is very difficult but thanks to your company the matter is made easier because you have a very wide range of parts for most motorcycles.
Review translated automatically
Reliable opinion
For jawa 50 mustang fits like the original very well made aesthetics is ideal now the jawa burns from a shot is very well sealed and does not leak manufacturer gives you everything you need in the kit so you do not have to be afraid that some old part will be needed fits perfectly to the engine do not need to rework anything very highly recommend for someone who has such an old motorcycle
Review translated automatically
Reliable opinion
Zipp Neken 2 50cm3 2019 Installation of the carburetor very easy. Just screw two screws from the carburetor mount, put the throttle on the cable, screw the throttle. Install the air filter. Put on the fuel hose. Put on the manual suction line. I rate the installation of the carburetor as very easy even with no knowledge of mechanics. The carburetor after installation is pre-adjusted ready to drive. Recommended.
Review translated automatically
Reliable opinion
I have an ATV KAYO 200, I had to replace the vacuum faucet because it took too long with the starter to fill the float chamber, the installation required an additional bracket, the quality of the pass-through faucet is good, only the markings on the body are Chinese, but this is not a problem for me. Greetings Marek
Review translated automatically
Reliable opinion
Very well made solid product ready to put on it does not need to adjust it very well cooperates with the motorcycle after purchasing this gasser problems with the motorcycle ceased no leaks no candle flooding, riding has become pleasant and stress-free.
Review translated automatically
Reliable opinion
Highly recommended Super quality product Very good material Very good price!!! Aesthetics are also very cool Very good fit for Simson sr 50 And there is an advantage has a fuel filter
Review translated automatically
Reliable opinion
Hello I received not such a carburetor as I ordered and it is in the picture I received a carburetor with a second air tube . For the carburetor I paid 119 zl and received for 79 zl .Greetings .
Review translated automatically
Reliable opinion
The carburetor itself works ok.It adjusts quite well.Pre-set and it ran quite correctly.Unfortunately I ordered a different one than I received.
Review translated automatically
Reliable opinion
The carburetor has been installed in a Zipp jazzy and a romat 2xl 2t, they work flawlessly.Scooters smoke to the touch and finally there are free revs.
Review translated automatically
Reliable opinion
Rubber connectors with 2t carburetor spigot very well made with attention to detail fits without any problem recommend to everyone
Review translated automatically
Reliable opinion
Caeseta 175/487 year 1988, carburetor fits perfectly installation went smoothly, motorcycle runs very nicely, highly recommend!
Review translated automatically
Reliable opinion
Nozzle an important element when codifying the engine capacity without this element the modification will have no effect in power
Review translated automatically
Reliable opinion
Recommended product . Careful workmanship at a low price does not differ from the original. I recommend
Review translated automatically
Reliable opinion
In my Cezet 350 it works 100%, does not leak, does not jam. It is ok I recommend the store gmoto!!!!
Review translated automatically
Reliable opinion
I knew it was Chinese, but I did not expect that so much:) Before the first installation, it is necessary to disassemble the entire carburetor and clean it from the filings and chips that the Chinese left. It is worth tightening all the nozzles, because in my case, after the first unsuccessful attempts to fire up, it turned out that the nozzle, like a fish, was swimming around in the float chamber. To correct also the suction plate, which in my case, did not hold the suction in the open position. After inspection and corrections, the carburetor works properly.
Review translated automatically
Reliable opinion
I ordered a carburetor for Peugeot Speedfight 2 76617 and I am very satisfied with this product. The carburetor fit my scooter perfectly and did not require any additional modifications. After installation and proper adjustment, I noticed an improvement in performance and combustion. The engine runs smoothly and does not stutter. It looks solidly made and has no leaks. I recommend this carburetor to anyone looking for a cheap and good solution for their Peugeot Speedfight 2.
Review translated automatically
Reliable opinion
I bought this carburetor for a CPI Hussar 70cc 2000 scooter.In appearance and size it matches the Mikuni carburetor that was originally installed on this model. Visual evaluation of workmanship and materials very good. Hassle-free installation and first start-up. The carburetor pre-adjusted so that the engine fired up after 2-3 kicks. Adjustment of the mixture and RPM did not cause any problems. Now after a short time of use, the engine runs evenly and "pulls" well.
Review translated automatically
Reliable opinion
Good day I bought a carburetor here for a very attractive price and in a very easy way to pay what not all sites, stores offer online.The shipment came fairly quickly and the condition of the package was intact and very well packed.Every day I was informed when the shipment should accept whether it is already completed , shipped , also with finding the address there was no problem with the courier very highly recommend.Greetings.
Review translated automatically
Reliable opinion
The carburetor is of very good quality, it fits my Router ws 50 moped very well, the moped started to run faster and the combustion is not higher at all. Although I had to correct the alignment of the firing pin because it was choking but now everything is fine, and the carburetor itself was adjusted already after unpacking from the package. It is certainly better this Japanese carburetor than my old Chinese one. I highly recommend this product.
Review translated automatically
Reliable opinion
I own a motorcycle brand Jawa 350 TS. Purchased by me carburetor is practically no different from the original as for the replacement is quite well made and fits the motorcycle without any problems after a small adjustment of the fuel level can be calmly mounted to the motorcycle and on the road. carburetor as for replacements this price I can safely recommend to any one user motorcycle Jawa 350 TS
Review translated automatically
Reliable opinion
Unfortunately, but the received gasifier turned out to be damaged , namely broken housing from the suction which made it useless. I have no time for complaints or returns, because it is again waiting for shipment. Apparently, the goods are not checked before shipment. A waste of money and time, and the scooter well - until the 10th will remain in the garage and I will again spend a fortune on bus tickets to work.
Review translated automatically
Reliable opinion
Rubber connecting the carburetor to the air filter unfortunately does not have a good reputation. Rubber very hard, not flexible at all, and when trying to insert , under the influence of fitting into position - it cracked.I suspect that either this product has been lying on the shelves of the warehouse for 20 years and the rubber has faded, or the components of the rubber badly matched. Something is wrong, if, when trying to insert it cracked.
Review translated automatically
Reliable opinion
I ask users when installing this gasket to clean the surface of the carburetor, diaphragm and seat at the engine. This should be done at least with extraction gasoline from the surface dirt, because in my case I had to clean it twice because in this place it unnecessarily drew left air and did not turn on the revs, after cleaning it laughs like a factory one
Review translated automatically
Reliable opinion
First class kit. It contains everything you need to carry out a carburetor overhaul. There is no need to make up anything, art, and for that you can freely disassemble the carburetor, clean everything and assemble with new parts. Revelation. I am mega satisfied. The machine rides on new parts like a firecracker on New Year's Eve, and the smile does not leave my face.
Review translated automatically
Reliable opinion
Hello I own a keeway fact50 ordered carburetor looks like a decent design, after installation required minor adjustments but with firing there was no major problem, a dozen or so kicks to flood the chamber and ignited. I got because 2 days after ordering so quickly especially since I ordered after 18.So far I am satisfied with the purchase, greetings.
Review translated automatically
Reliable opinion
Romet Ogar 202 50cc 4t 2017 carburetor bdb finally works, because the factory one was not workmanship and I put aside ,,finally does not muddle in 4th gear less heats up and can be adjusted I finally changed from pz16 to pz 20 japan and there is power I recommend 100% this store klijet service bdb I will buy only here anywhere else I highly recommend! ;)
Review translated automatically
Reliable opinion
Hello I own a 1989 Jawa 350 TS motocrosser and unfortunately the carburetor rubbers original have become hard I bought new ones, put them on, everything fitted super well, and now the engine works superbly at low revs. I bought new ones and now the engine works superbly at low revs.Thank you and greetings .jarek19121
Review translated automatically
Reliable opinion
zipp GT increased 70 ccm just change the nozzles no problems with this gasser with adjustment etc speed max 80-90 km nicely collects at 5.5gr standard rollers I have two zipp and already in the second one also this gasser is previously pseudo tuning thick coil was forever cleaning adjustment etc left revolutions ,, recommend 10/10
Review translated automatically
Reliable opinion
A carburetor for £60 I expected something auntie better, but: -the floats do not have a full range of movement -there are traces of machining inside -it stinks until your head hurts -unsigned nozzles making it unclear if they are the same as in the old one or some others It could be better. As it did not fire so it does not fire.
Review translated automatically
Reliable opinion
I own a Peugeot spedyfight 2001 scooter after entering the details of the scooter and that I need a carburetor for this model in the store they sent perfectly this item what I needed all the parts were included as per. Picture as well as the replacement was not complicated the product is solid and durable I recommend
Review translated automatically
Reliable opinion
Carefully made replacement, everything runs smoothly without jamming (float, throttle, etc.). All necessary components assembled in the kit. After installation, without much adjustment, the jawka fired up and runs poprana - it even has free revs which was problematic on the original carburetor.
Review translated automatically
Reliable opinion
My motorcycle is a late 60's/early 70's railroad diesel drainage truck with an engine from an IŻ-56. We bought this carburetor and it is MEGA! Wonderful adjustment, perfect flow, great workmanship. Happy New Year wishes Karol Lubaczewski President of the Society of Friends of the Krosniewice Commuter Railway
Review translated automatically
Reliable opinion
I ordered a carburetor for a 2009 Yamaha aerox 50cc stage 6 I am impressed with how the purchase went I had the carburetor after 2 days as for the carburetor itself it's a revelation after installation there was no need to do any adjustments the bike runs better than new I really recommend I am mega satisfied
Review translated automatically
Reliable opinion
I own a jawa 350 de-lux and I put on a carburetor from ts, the purchased carburetor works perfectly, the jawa fired up immediately after installation and pouring fuel, I did not have to adjust anything, more than that on this carburetor moto has better acceleration and spins more vividly. 100% satisfaction
Review translated automatically
Reliable opinion
The faucet is of very good quality. It is not like most that fall apart in your hands just really sturdy. It fits the Simson SR50 perfectly, nothing leaks, the fuel filter in the faucet is also very good. The faucet looks very good, even like the original. I highly recommend it.
Review translated automatically
Reliable opinion
Good morning everyone I bought this product (gasser) I rate it very good immediately after installing it into the scooter without any interference with the settings of the gasser the vehicle fired up and runs evenly unlike the old gasser it is made of good materials. I recommend
Review translated automatically
Reliable opinion
In the first words I want to convey that the ganik simply is very good under the capacity of 49 CCM The carburetor is very well adjusted, you just put it on and go enjoying every kilometer you drive. I am very satisfied with the purchase of this gasifier. Best regards.
Review translated automatically
Reliable opinion
I have a 2011 keeway hurricen scooter The previous gator had some kind of malfunction and the scooter did not want to run. After replacing it with a new one it ran perfectly. There was, however, a small fault with the float was leaking, but I was able to fix it easily. I personally recommend this store. ;))))
Review translated automatically
Reliable opinion
I ordered this gasser for a friend, peugeot buxy 49cc year I don't know what about the gasser I bought it because of the fact that it is Taiwanese not Chinese performance of the gasser is very good buying such a gasser it should be well adjusted because it will be a whirlpool in the tank:-)
Review translated automatically
Reliable opinion