Forgot password
Order status
Free delivery from 150 euro
Motorcycle fuel system - parts
SHL M11 175
Browse by manufacturer
Products reviews
I own an '84 wsk 175 kobuz . i have owned it for a year . it has undergone a so called small overhaul(electrical ignition ) you can say polishing. However, it had a problem with firing up and getting into high revs. Now the motorcycle starts from the first one, no matter if it has been standing for a week or is warm, it works in the full speed range. You can safely say that it runs out from under the butt. However, the gasser had one defect, namely the valve closing the fuel supply after pressing the lever flooding the float chamber hung up and pissed fuel through the hole at the top of the chamber. Replacement of the valve for the original Pegasus from the era helped.Otherwise, the product is worth recommending. It helped to save the good name of Swidnica vehicles.
Review translated automatically
Reliable opinion
Greetings. Preparing my motorcycles for warmer days, I was forced to replace the float in the carburetor type PEGAZ. Replaced by me recently is in a motorcycle SHL 175 vintage 1966 :) I have already replaced the same product before in a 1967 SHL Wiatr and in a 1963 Junak M10, so the product prze zenie is already proven many times. First of all, what is important for me is solidity and durability. Robustness, so that when massaging it does not cause problems, and durability, so that we do not return to the subject of replacement too soon. In both cases the product works well. I recommend it, with me in each of the cases mentioned it works flawlessly.
Review translated automatically
Reliable opinion
Greetings. Junak m10 from 1963 I replaced the float because the old one, which had been installed for years in the place of the pusher deformed. The float made well of good material, tight, with good parameters and works well, fulfills its purpose 100%. This is the second such product purchased. I installed the first one about a year and a half ago in a 1966 SHL M11 and it runs correctly to this day so I recommend and greet you.
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
Warm greetings. Junak M10 from 1963. the gasket fit the faucet well, thickness good, after installation does not leak, works properly. I recommend and greetings.
Review translated automatically
Reliable opinion
Warm greetings. Junak M10 from 1965. the gasket fit the faucet well, thickness good, after installation does not leak, works properly. I recommend and greetings.
Review translated automatically
Reliable opinion
Wsk m06-z2. The rubber used to make the faucet gasket is not resistant to fuel. It swelled and flew apart after just a few minutes.
Review translated automatically
Reliable opinion
Unfortunately, the quality of the rubber from which the gasket was made fatal. In fact, it is unusable after literally several uses of the faucet.
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
I own a Junak M10. I decided to buy a new PEGAZ carburetor, because the old carburetors are hard to adjust due to their age. The description includes the information , "fits JUNAKA ". The price is affordable, visually nothing to complain about, spacing and fit good. Unfortunately, the carburetor does not respond to slow speed adjustment, adjusting the throttle or needle does not change much. The carburetor funnels fuel into the cylinder in excessive amounts, black smoke from the exhaust pipe and the smell of fuel, response to the gas is uneven The carburetor is not recommended. The plug, filter from the kit are OK.
Review translated automatically
Reliable opinion
I needed the present gasket for the faucet mounted in the tank of a small soiler. I could not find it anywhere. Only on your site, in addition to a photo of the gasket and information that it fits a Junak, its dimension was given - a diameter of 17 mm. This decided me to make the purchase. The gasket fits and is OK. A small thing but very happy. It is often the case that you buy things that you need to adapt for your own needs, and then such information is essential.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
There was a moment that I was lost as to what length the firing pin is for the Pegasus 24,because I had some shorter one,and now be sure what the height of the clasp is really supposed to be correct.However,history has come full circle and they are producing parts from fifty years ago based on those of that time.I don't think I would have come up with that it should be brass,but I admire.
Review translated automatically
Reliable opinion
SHL 175 M11 1967. The price for the carburetor is very affordable. And what is better, the motorcycle works on this replacement really sensational and did not require major adjustments. Made very nicely. Like the original. And for the money. Honestly exceeded my expectations. Installation without any problems. Nothing to complain about. I recommend.
Review translated automatically
Reliable opinion
Hello, I own a SHL Gazelle motorcycle with a capacity of 175 ccm. The fuel faucet gasket I purchased fits well and has an aesthetic appearance. About the material from which it is made I can not say too much because it was recently put on. So far it is fulfilling its purpose. Regards.
Review translated automatically
Reliable opinion
I own several motorcycles to which this carburetor fits mn shl 175W, the carburetor does not work in any motorcycle is badly fitted inside. The insert of the carburetor, the one where the slow speed nozzle is, should be tight in the body of the carburetor, and there is a play of about 1 mm, the carburetor has no right to work.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
WELL, WHEN I WAS STICKING TO THE OLD IT WAS ALWAYS POURING GASOLINE AND NOW I BOUGHT THIS KIT IN AND WHAT IS DRY AS IN THE DESERT IT'S A SHAME THAT I LOST SO MUCH GASOLINE WHEN I DID NOT REPAIR THE FAUCET AND NOW IT IS MORE ECONOMICAL FOR YOUR WALLET AND CLEANER ON THE ENGINE AND THE FLOOR I RECOMMEND!
Review translated automatically
Reliable opinion
The supplier showed professionalism in the preparation and delivery of the shipment. The electronic notification system of the status of the order until delivery to the addressee made a very good impression. very fast delivery And that without a courier.
Review translated automatically
Reliable opinion
For the mosquito faucet 2350 fits and seals well (despite the lack of one hole for a spline to prevent displacement). The faucet moves much harder than with a cork gasket (which may be a disadvantage for some for others an advantage)
Review translated automatically
Reliable opinion
SHL M 11 year of construction 1965 After 56 years of service, it needs many repairs. Some parts I can save, but some need to be replaced. As soon as I put the moto together thanks to parts from Gmoto it will continue to ride on Polish roads.
Review translated automatically
Reliable opinion
The filter has a very cool reusable solution. It can be taken apart and blown out, which is a big plus. After several such treatments, the filter continues to be tight, no fuel leaks from it. I highly recommend
Review translated automatically
Reliable opinion
A good, solid guide ;)
Review translated automatically
Reliable opinion
Copper washer, round. Such as I dreamed of ;) Although when I wanted to mount it, it turned out that it is not required. I'll leave it for myself as a souvenir and return to the store as I do every time. Full professional
Review translated automatically
Reliable opinion
Gasket after installation ok, but after contact with gasoline increased its size. I needed to leave quickly and trimmed on the outside. It did not do much, had to be sent back for complaint. My fault.
Review translated automatically
Reliable opinion
Very flexible, perfectly fits the Mosquito, allows you to replace old hoses that have already lost their flexibility. Easily cut to the desired size for a perfect fit.
Review translated automatically
Reliable opinion
I was wrestling with thoughts whether to buy a cheaper (Chinese) version or a Polish one. And I do not regret, reliable and trouble-free in use. Appearance very aesthetically pleasing and close to the original. Chinese "like" to leak.
Review translated automatically
Reliable opinion
The filter fits the Jawa Mustang very nicely. Small, not chewing si3 in the eyes like the paper ones. I think it's worth paying the extra 3-4zl. Nothing si3 is airing up. I recommend
Review translated automatically
Reliable opinion
Filter prima sort. Elegant looking . Fulfills its function I recommend to all who own old mopeds or even lawnmowers.
Review translated automatically
Reliable opinion
My opinion is one and the same. "If everything is at the highest level then there is nothing to write about". Greetings to all WSK owners
Review translated automatically
Reliable opinion
Works great in stopping dirt from entering the carburetor Looks good and fits well Transparent so you know when its time for change
Review translated automatically
Reliable opinion
SHL 175 M11W year 1967. I recommend Gmoto. Professional approach to the subject. Very fast shipping. Contractor worthy of recommendation and trust.
Review translated automatically
Reliable opinion
Very good quality materials,aesthetically made, everything fits well, easy installation and affordable price. I recommend
Review translated automatically
Reliable opinion
Hello I own a SHL M 11 motorcycle the faucet I bought breaks perfectly as well as the rest of the parts I purchased. Greetings!
Review translated automatically
Reliable opinion
SHL M11 175, 1968, solid workmanship, fits perfectly, the product meets my expectations, highly recommend.
Review translated automatically
Reliable opinion
SHL M11 1963r. Faucet super quality, we will see how long it will last so far I am satisfied. I highly recommend !!!
Review translated automatically
Reliable opinion
The kit has all the necessary components to repair the carburetor, The carburetor works like new.
Review translated automatically
Reliable opinion
Fulfills its function as it should , it is good to fit it for example to WSK
Review translated automatically
Reliable opinion