Forgot password
Order status
Free delivery from 150 euro
Motorcycle ignition coils
Romet Kadet 50
Browse by manufacturer
Products reviews
Romet Kadet 87. Does not fit in the original base. Too large diameter of locating pins. A failure! Execution poor. Spacing of screws-fits. Cables very thin. Not a Polish manufacturer as I was assured. Goods to return. I do not recommend this coil, avoid from afar!
Review translated automatically
Reliable opinion
For the mosquito 2350 with the s38 engine (egg), the coil purchased does not fit in the holes of the spark arrestor (the spacing of the pins is wider by about 0.5mm, which makes it impossible to install without interference from a file). As for the materials, I have no major complaints, however, the wire could be a little longer.
Review translated automatically
Reliable opinion
Mr2375, Ogar 205 and 50-T1 toners. This coil will recall the ignition of any of them in the 2375 has worked for 5 years and I have no complaints. It always required a slight grinding, but that's a minor thing. The best part is that the spark would kill a horse and until you hear it crackle beautifully.
Review translated automatically
Reliable opinion
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
Reliable opinion
Romet Ogar 205 The ignition coil is a tragedy. It does not fit in the mounting holes. After reaming the holes and installing the coil, it was impossible to put on the magnet wheel. It was necessary to file the coil. Final mounted worked 50 seconds and died.
Review translated automatically
Reliable opinion
Romet ogar 205 50cm.coil as best as possible,good quality,but it does not fit on the centering sleeve,too large diameter you need to drill holes,otherwise everything is as described.I recommend
Review translated automatically
Reliable opinion
I bought this coil with rather mixed feelings. When it arrived it made a very good first impression. 0 problems with installation and the moped finally came to life
Review translated automatically
Reliable opinion
Romet mr 2375 what to talk about.Coil for the spark gap fits however, you need to slightly "fit" it with a file because otherwise it rubs against the magneto.Romet fires up and rides.
Review translated automatically
Reliable opinion
Romet komar, the coil fits on the old holes, however, I had to grind it to enter the magneto (old), but the coil does its job. I recommend
Review translated automatically
Reliable opinion
Poor quality, does not fit the original spark arrestor base, you have to redo the housing, it is too wide and the pin spacing does not fit.
Review translated automatically
Reliable opinion
Romet pony 80r fits on the mounting holes but the threads are embedded in glue and when tightening the pony began to rotate.
Review translated automatically
Reliable opinion
For this price I did not expect miracles, but the coil surprised. The spark is nice, the fit to the original base is also good
Review translated automatically
Reliable opinion