Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
Romet Kadet 50
Options +3 
Browse by manufacturer
Products reviews
Hello cordially. I apply the candle to my motorcycles WFM from 1961 WSK 1969 year b1, the so-called two frame. SHL m11 from 1966 and 1967 (Wind) and Junak m10 1963 and 1965 In all models works well. Such motorcycles to a fairly expensive sport so if you do not need to overpay and this is an inexpensive and good product. In my case it works. I recommend and greetings
Review translated automatically
Reliable opinion
The holder solidly made thick plates with a special slide-out. The holder for p21/5w bulb touches both plates on the sides and style and the bulb shines on 2 filaments. The quality is very good, you can feel that it is not the cheapest holder, but well made and fitted to the lamp. I sincerely recommend and Greetings Marcel Blacharski
Review translated automatically
Reliable opinion
Greetings. I think I have already given feedback on this product once. Good candle and with me it runs well in WSK 1969 year b1, the so-called two frame. 1961 WFM. SHL from 1966 and 1967 (WIATR) and junak m10 from 1963 and 1965. I recommend and give my regards.
Review translated automatically
Reliable opinion
The purchased headlight glass is of the highest quality, without any blemishes, in short the original . Exemplary workmanship, finish safe for the user. Dimensions in accordance with the description. As you can see from the photos wide application.
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
Romet ogar 205 year 1986. lamp fits, very good workmanship everything works electrics perfectly routed inside, i recommend this lamp similar to prl lamps
Review translated automatically
Reliable opinion
Owner of mz etz 150 Perfect for mz original product assembled at the factory lasted me 9000 km Perfectly compatible with the original carburetor and bing
Review translated automatically
Reliable opinion
I OWN A JAWA TS 350 , SIMSON S51 AND MZ ETZ 250 . BOUGHT ITEM MET MY EXPECTATIONS , THE INSTALLATION WENT WELL - NO PROBLEMS.
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
I was looking for a long time for a good lamp for my Romet naazczescie found on gmoto. Assembly banalbie simple and satisfaction guaranteed.
Review translated automatically
Reliable opinion
The lamp is very close to the original from the era, it fits perfectly on my 1970 Komar 2330 which I am currently restoring.
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
Motorcycle M2.The lamp is very well made,shines nicely.The price-quality ratio-revelation.I recommend the purchase !
Review translated automatically
Reliable opinion
Komar 2350 , lamp very nicely made , almost like the original, the lamp seems a little smaller
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
The lamp is identical to the original. Plastic and glass parts well made, precise finish. The lamp comes with a clear instruction manual with cable numbering, which helps when connecting. The lamp also has a light switch and an ignition switch, so we have the problem of an additional element out of the way. When assembling, you need to pay attention to the attachment of the cover of the optical element, you can use a rubber mallet for this, because pressing by hand will not do much. In addition, you should take care to clean the holes of the metal plates in the frame (those to which you mount the lamp) so that there is a connection with the ground. It would be worth the lamp to add new mounting screws (screws from an old romeet spoil the effect, collectors know what I mean:), bulb and gasket for the counter. Often when ordering this is forgotten. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
Romet Kadet, the interrupter looks good at first glance, however, you need to work on it so that there are no problems with it. First of all, tighten the locking plate on the side and strike the rivet which holds the part isolated from the base in one place (in my case it worked on this rivet and caused short circuits). The second thing is to bend the spring from the toothbrush like the original so that it does not go into the holes, but falls into a certain place locking on them (U-bend where it enters the hole). Adjust the curvature of the anvil to the toothbrush by appropriate bending (in my case it went that oblique). And the last thing is to throw away those plastic insulating washers and buy thin ones made of rezotex or ebonite ) to match the height of these washers to the anvil.
Review translated automatically
Reliable opinion
Romet Ogar 200.Currently after 4 years of riding it was time for an overhaul. One of the things I replaced was the spark plug.During these 4 years I never once replaced the spark plug, because there was no need. Now, when the opportunity to buy came, I decided that I would buy the identical one I had, because it is proven, (I also thought about a new Spark F80, which was originally installed, but after reading reviews about new Sparks - I gave up). Of course, the old one still works, but nevertheless it's been a while and I just preferred to buy a spare just in case. The prudent always insured ;) In short: a very good candle for not much money.
Review translated automatically
Reliable opinion
Romet moped bell in chrome is a sturdy, easy-to-install accessory, perfectly matching the motorcycle. Its loud sound ensures safety on the road, attracting the attention of other traffic participants. Aesthetically, it looks great, adding elegance to the appearance of the moped. It is a practical and stylish item worth having, especially if you want to stand out on the road and emphasize the character of your vehicle. Its versatility makes it fit a variety of moped models, making it an even more valuable accessory. Highly recommended :)
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The interrupter has a German TUV certificate, this is always a guarantee of quality. After installation and ignition alignment, it works as Predom Romet factory ordered. During installation I had a problem with the pin on which the interrupter is seated (I detected a small play, meanwhile it should not be there, the pin should be mounted at a right angle of 90 degrees, a little tinkering threading and the problem eliminated). Romet Ogar 205, year of manufacture 1987.
Review translated automatically
Reliable opinion
I own a Romet Kadet and decided to restore it, the problem turned out to be the lamp which did not survive the test of time fortunately at Gmoto I found what I was looking for although I was not sure if parts for such old mopeds are available, installation was easy put the bulb in, connect three wires and you can ride, the quality of the lamp is very good and delivery to the house was fast and also trouble-free I recommend.
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
Romet Kadet , the capacitor fits in place of the old one without reservation, the installation went without a problem. Wire minimally shorter than the original about 3mm, but reaches the same with the same arrangement in the spark gap. Remember during installation to soak the felt in oil and properly bend it to adhere to the magnet cam (if you install without bending it will not lubricate).
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion
This fits to Romet Motorynka m301 well. The length is a bit more than original, but no problem. I had two issues with this one: - the switch did not work. A connection problem. Had to remove the switch and do some solving. - The blue wires are not connected to the ground. For some reason the wires do not touch the connection bolt mounting. Need to fix that.
Review translated automatically
Reliable opinion
Romet Ogar 205 from 1990.I received this smaller capacitor with a length of 22 mm , it has a shorter wire and there was a problem with connecting it to the coil.After talking to the store staff I was immediately sent the longer capacitor -27 mm without any additional cost.This capacitor has a wire 5 mm longer and fits perfectly to the above type of Romet. I recommend this store.
Review translated automatically
Reliable opinion
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
Reliable opinion
The lamp as described differs slightly from the original at least the one I had that the top of the lamp is straight and there is a slightly rounded. When tightening this rubber to the fender, I advise you not to exaggerate with force because it is quite flexible and later you have to work hard to fit the lampshade. If you do not exaggerate with the force of this rubber, everything fits perfectly.
Review translated automatically
Reliable opinion
A capacitor is an important component in an electrical system. It is really worth replacing from time to time preventively. Fits into a rometa ogar 205, a little work to put on (pulling off the cover, magneto, etc.), but there were no problems with fitting into the spark gap. After installation, the whole installation works well. Romet Ogar 205, year of manufacture 1987
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion