Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Barton Tzr 50 4T
Manufacturer
Price
Sort
Options +2 
Browse by manufacturer
Products reviews
Barton TZR 50N. Mirrors of very good quality. Modern design and slightly visible inscription "moretti" at the bottom of the glass gives a taste. They look much better on the motorcycle than in the photos. Fits confidently to many models of barton or other such motorcycles. The price/quality ratio is very good. I heartily recommend ;) Pozdroo
Review translated automatically
Reliable opinion
I have a motorcycle Junak 905.Its fault was that it does not accelerate in 4th gear, so I decided to buy a 12 tooth sprocket, because I have 13 as standard, so I ordered it.Once it arrived I immediately went to install it simply fit as standard. Now my junak accelerates in 4th gear.
Review translated automatically
Reliable opinion
Gear shift lever Romet zetka very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
Reliable opinion
Front sprocket 428 12 teeth very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
Reliable opinion
I should have thought of taking photos but unfortunately I didn't... having said that, these are really very, very good quality gaskets and I'm not mincing my words. I've already bought cylinder head gaskets ect on other sites like 50 Factory which didn't hold up at all. I didn't even do 1000 km and they were already damaged, whereas the gmoto gaskets are so strong that if you have to dismantle the cylinder head the gasket won't break at all and I highly recommend them.
Review translated automatically
Reliable opinion
Howdy.I purchased a 11 tooth front sprocket from gmoto.I was surprised that I only paid 10 zloty for this product as it is from a decent company.I own a street 50 moped and there were no problems with the sprocket.It fits perfectly on a 428 120 link chain.According to me,the power seems to have increased a bit but the v max has decreased.If we try a bit harder and shoot the clutch we will be able to ride on 1 wheel.I warmly and sincerely salute g moto for their excellent and quality products.
Review translated automatically
Reliable opinion
Hello, I have a tuned 50/175 cc motorcycle that has a gear on this rubber. This rubber for the rear sprocket drove me 8 thousand kilometers on the engine 50 and 110 cc. Without problems therefore I recommend. I write a note for all DIY enthusiasts like me that if you give a large and powerful engine to such a small motorcycle, the rubber will need to be replaced every 1-2 months. Rubber is hard and good, but up to 11 horses maximum At 18 horses the rubber can not cope I rate 5
Review translated automatically
Reliable opinion
Shopping at Gmoto is a pleasure. I previously bought from another vendor where I waited up to 2 weeks for delivery. I had to callely remind myself so they would ship at all. At Gmoto shipments arrive very quickly, they are very well packaged, and more importantly the price. The prices are low, the quality of the products is high. I highly recommend buying on Gmoto without wondering if this company is good. You order after two or three days the courier knocks on the door.
Review translated automatically
Reliable opinion
The carburetor is of very good quality, it fits my Router ws 50 moped very well, the moped started to run faster and the combustion is not higher at all. Although I had to correct the alignment of the firing pin because it was choking but now everything is fine, and the carburetor itself was adjusted already after unpacking from the package. It is certainly better this Japanese carburetor than my old Chinese one. I highly recommend this product.
Review translated automatically
Reliable opinion
Gb Street 72 When I was replacing the drivetrain on my moto when removing the rear wheel literally spilled out this rubber taker , the pieces were so many that I was not able to pick them up and at least put them together . The part I ordered here fit perfectly and was made of better quality materials than the original . In general, I ordered here a lot of parts and can hand on heart recommend this store . Greetings
Review translated automatically
Reliable opinion
Ogar 900, the whole fits perfectly. Used in place of the burned out only the charging coil of the CDI module, after a slight modification of the winding connections and changing the connectors. By the way - in this stator with one coil providing battery charging, it is necessary to periodically recharge the battery!!! After the replacement so far the scooter starts without any problems.
Review translated automatically
Reliable opinion
Romet Ogar 202 50cc 4t 2017 carburetor bdb finally works, because the factory one was not workmanship and I put aside ,,finally does not muddle in 4th gear less heats up and can be adjusted I finally changed from pz16 to pz 20 japan and there is power I recommend 100% this store klijet service bdb I will buy only here anywhere else I highly recommend! ;)
Review translated automatically
Reliable opinion
I did not confess that I received the shipment so quickly. It's been a long time since I ordered parts for Romet zetka 50.After 10 - years without failure and 24700 km only broke down for good.I hope that I will still have opportunities to order for rometa. Thank you and I wish you all good health. Greetings Andrzej Tabaka
Review translated automatically
Reliable opinion
In the first words I want to convey that the ganik simply is very good under the capacity of 49 CCM The carburetor is very well adjusted, you just put it on and go enjoying every kilometer you drive. I am very satisfied with the purchase of this gasifier. Best regards.
Review translated automatically
Reliable opinion
I own a 2020 Apollo Avenger 125 Quad the sprocket was easy to install and I think it is made of durable material. It looks pretty good for the price, and fits like a glove. The 12 teeth fit perfectly, the chain is not too tight and the quad has better performance.
Review translated automatically
Reliable opinion
Hello I have a zipp vz1 year 2015 pads fit but there is a problem with installation because the metal base is thin from the original and it barely holds on to the guide of course over time as the pad wipes it will hold better
Review translated automatically
Reliable opinion
Junak 901 50 cm^3 2013 year . The product is made according to the highest care and solid material, the course of installation of the gear shift lever itself did not even take 5 minutes. I am very satisfied and I know that you are worthy of recommendation.
Review translated automatically
Reliable opinion
So yes the sprocket I ordered is a very good fit for the Honda 450 and very nice to ride however ze first 2 days it was not nice to ride because the sprocket was popping off the shaft but on the 3rd day of riding it is fine I give 5.
Review translated automatically
Reliable opinion
Carburetor ok after adjustment perfectly goes into rotation cold smoke without suction, orginal nozzle is 78 one flaw is the drain screw from the float chamber is not drilled and you have to unscrew completely to drain petrol
Review translated automatically
Reliable opinion
I own a Router WS 50 I installed this sprocket in 15minutes and I highly recommend it looks very nice and durable I highly recommend the sprocket has already traveled about 500km and shows no signs of use. I recommend
Review translated automatically
Reliable opinion
Goods extra . Super fast delivery . Goods flawless and very well packaged I highly recommend this store , because how many times I bought from Gmoto I did not have the slightest problem . 100% trust . Greetings .
Review translated automatically
Reliable opinion
I bought this sprocket for zipp, it came mega fast, contact with the seller at the highest level. Quality of materials very good, fit 100%, aesthetics I rate very good with a big plus
Review translated automatically
Reliable opinion
Excellent installation better víkon and seamless handling fast delivery of parts serious negotiation super prices men recommend Gmoto a lot of quality workmanship dilu and viborne prices
Review translated automatically
Reliable opinion
welcome to the product as the most trustworthy,long life good quality material I recommend as much as possible and certainly will still place an order. CONGRATULATIONS
Review translated automatically
Reliable opinion
Rear sprocket rubber made of very durable rubber that perfectly fits the rear wheel as well as the rear sprocket sand! Very good quality product I recommend !
Review translated automatically
Reliable opinion
The lever fits perfectly on the engine 139fmb moped Junak 901 sport 50 2011.It does not bend, it is perfect. The rubber used on the lever does not slip. I recommend this product!
Review translated automatically
Reliable opinion
I recommend ✌️pasuje for Honda MB 80 1980 installation mileage very fast the sprocket as in the description is 12z you can see that it is made of durable material for this price I highly recommend it
Review translated automatically
Reliable opinion
I own a 50cc Romet Zetke. I needed a new oil pump and as always I could count on Gmoto, the quality of the pump at a high level simple and trouble-free installation. I recommend
Review translated automatically
Reliable opinion
I can't write much because I'm just about to get started on the repair but I'm very happy with my purchase the goods look solid and good . I recommend a solid seller .
Review translated automatically
Reliable opinion
For gb street 50 fits perfectly. Installation on the seger ring is child's play, everything fits perfectly, the quality of the sprocket very good. I am satisfied, I recommend.
Review translated automatically
Reliable opinion
Bought so far they are holding up well I will soon start lapping the engine as it is overhauled, and the seals themselves I hope they will work thank you gmoto.
Review translated automatically
Reliable opinion
The product is consistent with the original. Well packaged. Conforms to the description. On the other hand, no information about the fit to my motorcycle. Very good contact with the seller.
Review translated automatically
Reliable opinion
Very good quality, fast delivery. Safely packaged. My most frequently chosen store where I shop for my motorcycles. I highly recommend !!!!
Review translated automatically
Reliable opinion
The product fits. Compared to the original it feels a little softer. There was a little play after putting the wheel on, but against the damaged pulled original it is incomparably better.
Review translated automatically
Reliable opinion
Everything fits like a glove. The quality of the sprocket a little worse than the original, but it should still serve a lot of miles. Very fast shipping and great service. I recommend
Review translated automatically
Reliable opinion
Good quality at a very good price.It is worth paying attention to the spacing of the security holes, because it may be minimally different from the spacing for the screws in the toebox.
Review translated automatically
Reliable opinion
The product is made of very good materials. The fit is very good. Installation very easy. After replacement, the motorcycle began to run quieter at startup.
Review translated automatically
Reliable opinion
Barton Fighter 4t 50 The rubber fits perfectly, I hope it will also last a long time. The rubber gives the impression of being reinforced Very fast delivery I recommend to everyone.
Review translated automatically
Reliable opinion
Romet Zetka 50 The gaskets were made with great accuracy and quality, the installation went without any problems, since installation they have not let go a drop of oil.
Review translated automatically
Reliable opinion
Worked great and fast delivery.item as described and fit perfectly.goods well packaged.will be happy to order from them again. Mfg Karl
Review translated automatically
Reliable opinion