Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Honda CB-1 400 F 1989
Manufacturer
Price
Sort
Podobne:
Podobne:
€8.76
Speedometer cable
Options +6 
€19.80
Lowest price from 30 days before discount: €24.75
Fits on the frontEBC FA 142 brake pads (2 pcs.)
(12) 
Options +6 
€19.80
Lowest price from 30 days before discount: €24.75
Fits on the rearEBC FA 140 brake pads (2 pcs.)
(5) 
from 5
Browse by manufacturer
Products reviews
I do not recommend this plug absolutely. The plug did not withstand the first tightening with a torque wrench much before reaching the proper tightening torque. I can't tell where the positive comments under this product come from, maybe with larger diameter plugs it is better. In my case, a simple oil change ended up with a whole day of disassembling and putting the motorcycle back together to remove the broken thread and the magnesium that fell inside the oil pan. The fit itself is not right either, the original plug has more than twice the thread length.
Review translated automatically
Reliable opinion
Honda NX 500 Dominator 1988 It fits perfectly. It is solid and when it came in contact with the wrench cap, it did not behave like plasticine unlike the old screw. I have already done 1500 kilometers. All in good order. An interesting option with a magnetic tip. I recommend.
Review translated automatically
Reliable opinion
Hello I own a Honda VTR1000 F 1997 I bought a mirror for a small amount of money which is durable, not like the Chinese crap that folds at higher speed and vibrates at slow speed. With a clear conscience I recommend Gmoto.pl store
Review translated automatically
Reliable opinion
1. bolt 12, which is a size 17? The threads fit, but. 2. it cracked while screwing leaving a piece of thread in the oil pan. 3. want to experience a heart attack during an oil change? Only 14.80!
Review translated automatically
Reliable opinion
The screw is professionally made, it holds until nice. It certainly does not drop a drop. The magnet attached to its end is so strong that I had a hard time detaching it from the tool cart. I recommend
Review translated automatically
Reliable opinion
WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.
Review translated automatically
Reliable opinion
Good copper pad a lot of size options price good relative to the quality of workmanship well here I really order everything I need from gmoto and I am always satisfied.
Review translated automatically
Reliable opinion
I have a Honda CLR 125 , 2002. I bought the fairing glass. I am satisfied with the goods. Good quality. Assembles quickly and without problems. It looks very impressive.
Review translated automatically
Reliable opinion
In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.
Review translated automatically
Reliable opinion
Everything ok, I recommend for CB500 - fits perfectly. The heat sink provides adequate cooling, the factory one did not have it and there was a problem.
Review translated automatically
Reliable opinion
The thread of the plug ok and basically that's it. Unfortunately, the magnet practically does not do its job. It's a waste of money for this particular plug.
Review translated automatically
Reliable opinion
Kawasaki eliminator ZL 600 1998 year half 600cm windshield installation went through without a problem as it was written and so I mounted.
Review translated automatically
Reliable opinion
Glass concrete. Shipment well protected, the installation itself takes 3 minutes. The motorcycle takes on character. Yamaha XJ 600.
Review translated automatically
Reliable opinion
Product as described, super fit, express delivery.Regards.
Review translated automatically
Reliable opinion
About a year ago I installed a colleague in a Honda CB500 - probably 1998.To this day he does not complain. Recently another colleague had a charging problem (also CB500, 1999) and asked for advice (the previous regulator - "more branded", read much more expensive - seemed to overcharge the battery [colleague's opinion, I did not check]. It turned out that everything was OK, the one evaluated remained stock). In both cases, the spacing of the mounting holes did not fit very well, but it's 0.6 mm max - just "lick" the housing with a suitable conifer. There could be a little more charging voltage (original :14.5 V, evaluated : 14.17 and 14, 22 V - two copies). If someone "embraces currents" and would like to check the reg. "dry", just like the "classic" ones. - regulated power supply, bulb voltmeter - then you may be strongly surprised. But after installation in the motorcycle everything OK. Probably some "more advanced" technology (perhaps - it's a little undervoltage is also not always so ?) Considering the price / quality ratio - I recommend. In general - in Hondas (at least of these vintages) you need to take care of the charging installation. Most often the problems begin at the connectors of the 3 yellow cables from the alternator. Corrosion, oxidation, increase in resistance, overheating, the rectifier-regulator begins to overheat, the internal electronics fall apart, no longer regulate the voltage and we have a "bubble" from the battery. It is worth checking these areas carefully. With Hondas (CB500, Transalp) I have done a little more than 80 kkm, and also a little at colleagues' repair.
Review translated automatically
Reliable opinion
EBC FA 142 brake pads are a product that definitely deserves a high rating. First of all, they are characterized by excellent workmanship and durability, which is crucial in terms of safety on the road. The use of modern materials means that these pads offer excellent braking performance in a variety of weather conditions, which will be especially appreciated by drivers traveling in variable climates. Installation of EBC FA 142 pads is simple and does not cause major problems, even for those who are not advanced mechanics. What's more, their design minimizes the risk of annoying sounds, such as squeaks, which is often an issue with cheaper replacements. While using the pads, I noticed that they have very good durability and wear evenly, which translates into a long service life. This makes them a very cost-effective choice in the long run. If you are looking for brake pads that combine high quality, durability and braking performance, the EBC FA 142 will be a great choice. I highly recommend them!
Review translated automatically
Reliable opinion
I currently ride a 1999 Yamaha XJ 600N Diversion. The windshield fairing Puig Naked - heavily tinted 100% meets my expectations. Thanks to it, riding at 120 km/h is pleasant, in addition, the motorcycle has not lost its appearance. Despite the inexpensive price, the fairing is made in very good quality, with attention to detail. A huge plus is the inclusion of clear installation instructions and a number of additional mounting adapters that allow a non-technical person to install the fairing in a few minutes using only the tools necessary to remove the front lamp on the motorcycle. The product b. Good quality, at a good price, thanks to additional mounting adapters fits "like a glove" and is easy to install. The fairing significantly increases the comfort of riding.
Review translated automatically
Reliable opinion
For this kind of money, the glass performs superbly. In addition to the glass and mounting brackets, the kit includes a number of different screws needed for installation. The glass fits motorcycles with side lamp holders. Despite its rather small size, the glass shields from the wind quite well. It is known that it is not a full fairing, but it is still better than riding without anything. I rate the quality and installation instructions at 4 with a plus. It is very possible that the windshield over time will catch small scratches on its surface, but what to demand for such money. In general, the glass is worth recommending and without hesitation I would buy it again.
Review translated automatically
Reliable opinion
For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).
Review translated automatically
Reliable opinion
Affairs, it conducts electricity. However, it does not fit the 1976 GL1000 K1 model, as it has a larger diameter than the original (factory) and will not go into the hole in the handle holder. I had to take the original one apart despite the damage and was able to repair it. Perhaps this one will fit the specified GL1000 78-79 but I will check this when I give it to a colleague. It would be good to have the basic dimensions plotted on the parts in the photo to see if it will fit us.
Review translated automatically
Reliable opinion
2002 Honda Hornet 600 The fairing was purchased to improve the appearance of the motorcycle. Significant changes in airflow I did not notice. The product is very well made. It comes with plenty of screws so that you can freely adjust the fairing. I recommend it to everyone who wants to make their equipment look more attractive. If you are looking for wind protection buy another Puig product at GMOTO! :)
Review translated automatically
Reliable opinion
Honda Dominator NX650 If you are asking yourself whether it makes sense to buy motorcycle accessories by mail order, then calculate the time spent in traffic jams to drive to the stores in search of selected items. My calculation indicates that for a few zlotys it's not worth it to run the car. On Gmoto I found everything I need. Both the price and delivery time are exemplary. I recommend.
Review translated automatically
Reliable opinion
I own a 2008 Honda Varadero 125XL Motorcycle.For proper operation, it is necessary to change the oil in the engine at the beginning of each season. In these changes, the oil drain plug gasket should be replaced periodically. Good gaskets are copper gaskets, which I purchased from Gmoto.pl and their quality is very good at an attractive price. I recommend.
Review translated automatically
Reliable opinion
Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.
Review translated automatically
Reliable opinion
Hello, I ordered a battery from gmoto company. I am very satisfied, very fast shipping and most importantly perfectly matched to my motorcycle. Any person who has a problem with the selection of parts for his motorcycle can confidently rely on the help of Gmoto and will certainly not be disappointed. I highly recommend.
Review translated automatically
Reliable opinion
I bought a fairing for Kawasaki er5, installation very easy and well illustrated in the instructions, the fit is good, a little had to bend the parts to fit perfectly. It looks great and, most importantly, serves its purpose, at speeds of 100-140 a significant improvement in comfort and convenience.
Review translated automatically
Reliable opinion
I bought a fairing for Kawasaki er5, installation very easy and well illustrated in the instructions, the fit is good, a little had to bend the parts to fit perfectly. It looks great and, most importantly, serves its purpose, at speeds of 100-140 a significant improvement in comfort and convenience.
Review translated automatically
Reliable opinion
Honda CB 500 S, 1999. Before replacement charging only above 3000 rpm at slow 12.3 volts without load, after replacement 14.3 volts after load 14.1-14 volts (you would have to check the battery and the pradnic-alternator itself before you proceed with the replacement) In summary - good purchase quality / price I recommend
Review translated automatically
Reliable opinion
The purchased fairing from Puig is really of excellent quality. The included mounting kit makes it easy to fit the windshield to our naked model. My CBF 500 is now more perfect. I chose the heavily tinted color and this is how I envisioned it, it fits perfectly.
Review translated automatically
Reliable opinion
The pad does its job. The best part, however, is that the store has well-matched parts for the motorcycle model. With many sizes of washers, it's important to buy the right one so that when you drain the oil from the engine, you don't have to look for the right one. We use a new one and we're done ;)
Review translated automatically
Reliable opinion
I use exactly this magnetic oil drain screw in every Honda I have. The screw, despite exposure to harsh weather conditions, does not corrode, does not catch deposits and, most importantly, does not leak. The magnet actually catches metallic flecks and does not lose strength.
Review translated automatically
Reliable opinion
Aprilia sportcity one 2T 2009 year Purchased gel battery is a good replacement for the acid counterpart, high resistance to discharge, higher starting current and perfect size match. It is worth replacing a classic acid battery with such a battery.
Review translated automatically
Reliable opinion
Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it
Review translated automatically
Reliable opinion
I have a motorcycle SUZUKI BOULEVARD VL800 year 2007 Moretti YTX9-BS gel battery as most suitable for this model dimensions and parameters everything fits moto turns without any problems :) and I think that's it LwG
Review translated automatically
Reliable opinion
The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level
Review translated automatically
Reliable opinion
License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.
Review translated automatically
Reliable opinion
Battery for kawasaki z800. The workmanship is very good. Moto fires to the touch. The only thing that is missing to the ideal is tapers so that the screw nuts for screwing the clamps themselves do not fall out, therefore for the fit I give 4 and not 5
Review translated automatically
Reliable opinion
A washer made of good copper. It fit under the drain bolt on the Honda CBR125R. Remember to warm up the engine before changing the oil. When the oil has already fried a sturdy bottom so that the washer does not come in contact with the old oil.
Review translated automatically
Reliable opinion
Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)
Review translated automatically
Reliable opinion
Product conforms to the order and the description, delivery a little long but in view of the end of year festivities, this can be explained. Responsive when messages sent for this order to be received
Review translated automatically
Reliable opinion