Motorcycle parts
Honda VT 1300 - Page 10

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-11-22, 22:44

View original

Piotr

Filter installed on a 2004 Varadero 1000. Filter in a cardboard box additionally protected by a film. Filter gasket moistened with some agent to prevent damage during screwing.

Review translated automatically

Reliable opinion

2017-09-18, 15:13

View original

Piotr

I bought 6pcs of gaskets and suggested when buying them by the photo posted in the description, But I received different ones.

Review translated automatically

Reliable opinion

2021-06-22, 08:54

View original

Sylwek

The filter of a very decent brand. I buy it all the time and have never been disappointed. A very big plus is that it can be unscrewed with a socket wrench. If someone has little space, as I do, to do anything at the filter then such a head on the filter is salvation. It is a little more expensive than the standard version but worth every penny. Last time I had a regular filter I had to perforate it and pour oil in the exhaust pipes to unscrew it , in this case the replacement was clean, fast and above all simple! I recommend

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2017-08-08, 21:57

View original

Marek

Kawasaki KLX 650 C. The gasket fits the manifold perfectly. It's hard for me to describe the quality of the material, since I didn't have this gasket at all before. The improvement is huge. It runs quieter and no blowouts. It fulfills its purpose. I recommend this product. Regards. Marek.

Review translated automatically

Reliable opinion

2021-11-07, 09:56

View original

Marek

Honda Hornet cb600fa pc41, the filter fits well, does not leak, quick and efficient replacement, the end of the filter can also be useful, because it is adapted for the key that is, it will be easier to unscrew at the next replacement. Overall I am satisfied.

Review translated automatically

Reliable opinion

2022-02-07, 10:42

View original

KONRAD

Hello, I bought this kit to stock to keep on the shelf for my Benelli TNT 1130 Gaskets very good company Athena I know and recommend. GMOTO SERVICES ALSO RECOMMEND always professional and without lime well packed and on time recommends and regards

Review translated automatically

Reliable opinion

2024-05-05, 17:43

View original

Wiesław

Filter as described hassle-free installation and a big plus for the ability to tighten with a wrench without using special wrenches for filters. Painting without cavities, and it looks aesthetically pleasing. Plus for the protective film on the filter inlet.

Review translated automatically

Reliable opinion

2021-02-15, 09:25

View original

Wiktor

Very good quality product. Easy installation, durable material. Everything is of the highest level. I am not a writer to write fairy tales in the opinion of 100 characters, so I invite you to buy. I heartily recommend.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2020-02-02, 11:46

View original

Bartosz

Triumph Street Triple 765 I have been using HIFLOFILTRO filters for years. In the standard version they do their job perfectly. You can the racing version, but for daily riding there is no need for it.

Review translated automatically

Reliable opinion

2021-06-03, 15:15

View original

Sławomir

I own a 2005 Honda CBF600. The sensor fit without a problem, plug and play. The replacement took 5 minutes. Fulfillment of the order was lightning fast, the product was with me the next day. Highly recommend.

Review translated automatically

Reliable opinion

2020-02-21, 09:47

View original

Mariusz

Everything in the best possible order. The part that I received is in accordance with the description (offer). The workmanship of the part is very good and the waiting time for the product is short. I recommend to everyone.

Review translated automatically

Reliable opinion

2024-04-13, 07:28

View original

Mariusz

Filters oil, flows on. No problems with pressure or leaking. It looks good on the CBR 600 F4i - by the color you just can't even see it between the exhaust manifolds ;)

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2021-02-13, 13:15

View original

Krzysztof

I own a 2015 Honda Goldwing 1800, the oils as well as any products I purchase are always first quality. I recommend to everyone. Installation without any problems.

Review translated automatically

Reliable opinion

2021-02-13, 13:15

View original

Krzysztof

I own a 2015 Honda Goldwing 1800, the oils as well as any products I purchase are always first quality. I recommend to everyone. Installation without any problems.

Review translated automatically

Reliable opinion

2023-06-09, 19:22

View original

Marek

HIFLOFILTRO filter is a very good solution for any motorcycle. And straightforwardly perfect. I used in each of my motorcycle at each mileage. I heartily recommend.

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2020-04-20, 09:38

View original

Adrian

Honda CB600 F Hornet, thanks to the possibility of using a ring wrench, the replacement went remarkably fast , it is worth paying a few zlotys extra for this convenience

Review translated automatically

Reliable opinion

2020-08-21, 06:39

View original

Michał

The description does not match the goods I received. The package marked with a sticker (chrome filter) but in the package was a regular black filter.

Review translated automatically

Reliable opinion

2018-03-18, 08:22

View original

Jarosław

Suzuki Intruder 800, seals of good quality, all dimensions met, has been installing for years in various motorcycles, certainly not the last :)

Review translated automatically

Reliable opinion

2016-05-27, 06:41

View original

Andrzej

-Kawasaki Vulcan EN 500A 1991. -after installation, the tightness of the exhaust system improved -It was definitely worth to buy the above mentioned product.

Review translated automatically

Reliable opinion

2018-03-21, 10:05

View original

Artur

I recommend, everything nicely, aesthetically packed,protected and as described. After installation everything as ok. recommend

Review translated automatically

Reliable opinion

2020-03-31, 10:10

View original

Krzysztof

The product shipped on time, b.well protected, everything efficiently, quickly and reliably , as described. I highly recommend, Krzysiek

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2024-06-15, 13:21

View original

Serhii

Unfortunately but for Transalp xl600 96r.p. - does not fit. It must be 37x45x25. But the quality is good, for other models must fit.

Review translated automatically

Reliable opinion

2024-01-22, 17:20

View original

Andrzej

Well matched to Nissin brake discs, work well with them, show long service life. Recommended.

Review translated automatically

Reliable opinion

2021-06-28, 12:41

View original

Tomasz

Kawasaki VN 15 SE from 1991. A set of Athena 41x54x11 front suspension seals - they fit perfectly, like the original.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2022-05-02, 11:20

View original

Mirosław

Honda SW t400 year 2010 very good filter, very good workmanship, fits my Honda It met my expectations

Review translated automatically

Reliable opinion

2020-01-24, 08:51

View original

Tomasz

Recommended product very easy to install oring included without any problems recommend to all interested parties

Review translated automatically

Reliable opinion

2022-01-30, 08:29

View original

Andrzej

Honda CBF600 PC43 - has been using for years, quality is sufficient with annual oil change interval and quiet driving.

Review translated automatically

Reliable opinion

2021-04-05, 10:14

View original

Krzysztof

Honda ST 1300 year 2004 Product made very well. The replacement went without a problem. Rating very good.

Review translated automatically

Reliable opinion

2021-04-05, 10:10

View original

Krzysztof

Honda ST 1300 year 2004 Product very well made replacement went without a problem. Rating very good.

Review translated automatically

Reliable opinion

2024-05-03, 21:34

View original

Waldi

The filter meets the specifications; I have been using these filters for many years - they unscrew easily without a filter wrench.

Review translated automatically

Reliable opinion

2024-09-26, 13:40

View original

TOMASZ

The product is worthy of recommendation. Meets the expectations of the user. Quick and trouble-free installation. Fits VTX1300

Review translated automatically

Reliable opinion