Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Junak M07 350
Options +2 
Browse by manufacturer
Products reviews
I own an '84 wsk 175 kobuz . i have owned it for a year . it has undergone a so called small overhaul(electrical ignition ) you can say polishing. However, it had a problem with firing up and getting into high revs. Now the motorcycle starts from the first one, no matter if it has been standing for a week or is warm, it works in the full speed range. You can safely say that it runs out from under the butt. However, the gasser had one defect, namely the valve closing the fuel supply after pressing the lever flooding the float chamber hung up and pissed fuel through the hole at the top of the chamber. Replacement of the valve for the original Pegasus from the era helped.Otherwise, the product is worth recommending. It helped to save the good name of Swidnica vehicles.
Review translated automatically
Reliable opinion
Greetings. I applied the shim to a 1966 Junak M10 motorcycle.While the engine was running, a slight tremor of the rear shock absorber glasses could be heard when stationary. After applying this shim the trembling stopped and the shock absorber works more rigidly. I recommend and greetings.
Review translated automatically
Reliable opinion
Greetings. I applied the shim to a 1966 Junak M10 motorcycle.While the engine was running, a slight tremor of the rear shock absorber glasses could be heard when stationary. After applying this shim the trembling stopped and the shock absorber works more rigidly. I recommend and greetings.
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
SHL M04 1953r balls of good quality what is most important they are round and very decent plating as for me they meet all expectations highly recommend
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969.The lampshade is well made, looks like products of the era, solid, welded and looks good. Greetings and recommend.
Review translated automatically
Reliable opinion
Junak M10 1962. The wheel rims and most importantly all the parts I have bought from Gmoto so far are of the highest quality and meet the requirements.
Review translated automatically
Reliable opinion
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
Balls like balls looks like good durable stuff. I'll ride around and see if anything happens to them or not.
Review translated automatically
Reliable opinion
I own a Junak M10. I decided to buy a new PEGAZ carburetor, because the old carburetors are hard to adjust due to their age. The description includes the information , "fits JUNAKA ". The price is affordable, visually nothing to complain about, spacing and fit good. Unfortunately, the carburetor does not respond to slow speed adjustment, adjusting the throttle or needle does not change much. The carburetor funnels fuel into the cylinder in excessive amounts, black smoke from the exhaust pipe and the smell of fuel, response to the gas is uneven The carburetor is not recommended. The plug, filter from the kit are OK.
Review translated automatically
Reliable opinion
The product used on the 1963 SHL 175.The first thing I noticed was the clever undercutting of the top hump at the gasket.At the time of rubbing the lampshade,as well as the fender,in the original,it got in the way a bit.Bravo.But not so straight to the sky.You would think that the crisis forces as little material as possible,but no,the communist lampshade is. thicker !!! So also .more durable.In the intention of the manufacturer thinner lampshade will result in faster replacement.Personally for this I give a minus.
Review translated automatically
Reliable opinion
WFM M-06 1960.A very practical thing, the quality of rubber and metal parts seems to be high. However, since the battery mounting bases are different, so different lengths of the battery mounting straps should be. This is not compensated for by the slight stretchiness of the rubber. On my motorcycle, there is a big problem with attaching the strap. Several sizes on offer would be ideal. It would also be helpful to specify to what maximum length the strap can be stretched.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
Jawa 50 mustang 1981 / Original frame head bearings have balls with a diameter of 5mm, while these are 6mm. I think that even looking at the shape of the cup they are too large . As far as Wsk is concerned they will fit as much as possible . Very good price and as Gmoto has already accustomed me . Super fast shipping and nicely protected products . Best regards to motomaniacs
Review translated automatically
Reliable opinion
Perfect fit for WSK 175.No problems when putting it on, the battery holds rigidly, does not vibrate, does not jump, Nothing to add nothing to add. The only disadvantage of the belt is the aesthetics of the workmanship, because there are overlaps around the metal parts, but you can turn a blind eye to this. Just sit with the knife for a while and it will be ok, I recommend! :D
Review translated automatically
Reliable opinion
I own a WSK B3 motorcycle with a 125 engine which I modified to look like a cross thanks to GMoto company I was able to complete the restoration process of this motorcycle and I am very pleased with such fast delivery from this store I will certainly buy more than one product from this seller. Best regards and have a nice day.
Review translated automatically
Reliable opinion
SHL 175 M11 1967. The price for the carburetor is very affordable. And what is better, the motorcycle works on this replacement really sensational and did not require major adjustments. Made very nicely. Like the original. And for the money. Honestly exceeded my expectations. Installation without any problems. Nothing to complain about. I recommend.
Review translated automatically
Reliable opinion
Balls made in an exemplary manner, perfectly rounded, dimensions 1:1 with the original, most importantly made of very hard material, and this is the most important because in the end it depends on these balls whether the rod will not fall apart while driving on uneven ground. Once again, I emphasize the workmanship and fit exemplary
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Well, unfortunately, I do not recommend. It fits neither the SHL M11 (1965) nor the SHL M17 Gazelle (1969) - incorrect attachment (there should be buckles on two sides, they could be smaller than what is installed)) well and for the Gazelle it should be a bit longer. Workmanship aesthetics are also average.
Review translated automatically
Reliable opinion
The supplier showed professionalism in the preparation and delivery of the shipment. The electronic notification system of the status of the order until delivery to the addressee made a very good impression. very fast delivery And that without a courier.
Review translated automatically
Reliable opinion
Parts perfectly replace the original ones, they also work very well in the Mosquito. If you are not sure if they will be good, believe they will definitely be perfect for your motorcycle. One set is enough for two garlands. I heartily recommend this product.
Review translated automatically
Reliable opinion
A good, solid guide ;)
Review translated automatically
Reliable opinion
Copper washer, round. Such as I dreamed of ;) Although when I wanted to mount it, it turned out that it is not required. I'll leave it for myself as a souvenir and return to the store as I do every time. Full professional
Review translated automatically
Reliable opinion
WSK 125 M06 B3 - fits perfectly - you need to stretch the rubber decently, which makes the battery sit stiffly. The rubber looks like not very good quality and the brackets look like rusted and covered with a layer of "tin".
Review translated automatically
Reliable opinion
I put it on my SHL M11. The build quality is very good. After assembling the carburetor and driving a dozen kilometers, I only tightened the float chamber a little because there was some fuel soggy around the chamber.
Review translated automatically
Reliable opinion
Very flexible, perfectly fits the Mosquito, allows you to replace old hoses that have already lost their flexibility. Easily cut to the desired size for a perfect fit.
Review translated automatically
Reliable opinion