Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Junak M07 350
Options +3 
Browse by manufacturer
Products reviews
The fuel filter fits nicely into the fuel hose, gets in tightly, does not sweat or leak anything filter is resistant to any impacts caused by such as accidental collapse of the motorcycle well filters the fuel from filings and various dirt that may accidentally get into the tank such a fuel filter will easily last for a year. I like the fact that it is transparent and you can see whether the fuel is flowing to the gasser or not I highly recommend it.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. The filter fit very well, it fits perfectly with the frame of the motorcycle. The filter immediately after installation began to catch impurities from the tank. Goods as highly recommended.
Review translated automatically
Reliable opinion
WSK 175 S2 SPORT Kedra fits like a glove it is slightly smaller in volume than the original but for my sport it fits perfectly holds the edge of the tank no need to glue anything up nothing comes off I highly recommend it
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
WSK of 1969, the so-called two-frame, fits shines, light bright good, installation simple everything fits. The same bulbs apply to SHL from 1966 and 1967. All of them so far serve their purpose
Review translated automatically
Reliable opinion
Hello I have a moped brand chopper kingway 110ccm registered for 50ccm the installation of the filter went through without any major problems I recommend to anyone for dirty tanks :)
Review translated automatically
Reliable opinion
Simson kr51/2 1985r. The kedra is made of a good flexible material that fits perfectly into the edge of the covers surely I will still want to buy it I recommend it
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
Tgb orion 125 engine gy6 year2002 mileage 22000. filter for gasoline ok can safely take next time I will buy it again
Review translated automatically
Reliable opinion
6V 2W light bulb. Bought them for my KE125. Fitted exactly as per description. Very good light and overall quality.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Very nicely made, thread fits, no problems with installation. Well galvanized
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
Unfortunately, as for this filter, the quality of the material is not at a satisfactory level, unless you measure yourself the correct lengths of the hose beforehand, put on the filter and do not move. When trying to remove the cable (by circling) one of the fuel hose connections broke off. It is possible that I got a defective piece, but there is no certainty. Here, unfortunately, I can not recommend the product.
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Seemingly an ordinary filter, but you can no longer buy it in not every automotive store. Here it is, however, at an affordable price and sensational quality. The installation goes quickly, and the capacity of the filter perfectly cleans the fuel, so you do not have to worry about something uncalled for getting into the carburetor with the fuel.
Review translated automatically
Reliable opinion
Suzuki Gn 125.Installation of the fuel filter takes literally a minute. The quality of filtration of gasoline from the old inside corroded tank is as ok as possible. As the filter housing is transparent you can see how much dirt it retains. The product is worth recommending, especially for the price.
Review translated automatically
Reliable opinion
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Zipp Steed 50 capacity 50ccm converted to 80 ccm filter as much as possible ok inside the housing paper cartridge and not as in cheap filters plastic mesh. Another plus is the small size of the filter which does not cause any problem of placing it in the right place.
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.
Review translated automatically
Reliable opinion
The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?
Review translated automatically
Reliable opinion
WSK 125 In general, the tensioner is ok. A little loose lock nut and thus skipping thread. But, as I know life, one in a few hundred pieces will be like this. Slightly squeezed in a vice and it's done. The tensioner works as it should. I recommend.
Review translated automatically
Reliable opinion
The fuel filter I have in front of me is solidly made and seems to fit my vehicle. Its aesthetics are simple but functional. I rate it positively, considering the quality of workmanship and the engine protection it provides.
Review translated automatically
Reliable opinion
I own a scooter ;) and for some time I had a problem with it because it was not running daily it turned out that the old fuel filter was clogged and no longer gave the amount of fuel it should and so I bought a new one and everything works as it should ;)
Review translated automatically
Reliable opinion
Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.
Review translated automatically
Reliable opinion
I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.
Review translated automatically
Reliable opinion
Jawa 350 TS 638. I ordered 2 fuel filters. Well, and the flap. One started leaking at the connection of the bottom with the body after 15 minutes, while the other immediately after unfastening the faucet. also better to add a few pennies and buy something better
Review translated automatically
Reliable opinion
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
Reliable opinion
I mounted the filter to my motorcycle and it was very easy to install, but before that I bought new fuel lines also on Gmoto. Pl filter performs its task very well and collects dirt that would find its way into the carburetor
Review translated automatically
Reliable opinion
Motorcycle 50 ccm,year of production 1986 it is known not the first youth .When starting sometimes the spark disappeared.So it had to be replaced with a new one and I heard the first sounds of the long unheard of engine of my youth
Review translated automatically
Reliable opinion
I have been shopping with this seller for a long time and each time I am very satisfied with the quality, speed and contact with the seller. I have already recommended several offers to my friends, who are also very satisfied.
Review translated automatically
Reliable opinion
I own a Simson S51elektronika year 89 with a capacity of 50cc, the filter looks aesthetically improved the appearance of the moped does its job without a problem passes fuel and retains what needs to be retained.
Review translated automatically
Reliable opinion
The filter is fine - it fits not only the moped, but also other equipment such as a petrol lawnmower. The low price dispels doubts about whether or not to replace every year with little-used equipment.
Review translated automatically
Reliable opinion
MZ ETZ 251, the same filter I installed a year ago in my motorcycle and after a year I can see a complete absence of deposits in the float chamber, I highly recommend a few zlotys and the problem with contamination of the carburetor with head
Review translated automatically
Reliable opinion
Kawasaki ltd 440 1983 overall a very good product very good fit adequate appearance also very nice it's a pity that kedra does not come in meters only in one meter pieces yes I highly recommend it
Review translated automatically
Reliable opinion
Kawasaki ltd 440 1983 overall a very good product very good fit adequate appearance also very nice it's a pity that kedra does not come in meters only in one meter pieces yes I highly recommend it
Review translated automatically
Reliable opinion