Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2017-11-10, 19:28
Dominik
In this set you will find all the gaskets that can be placed in the engine(In my case it was a Jawa 223 engine mounted in a Romet Ogar 200 moped) , carburetor, as well as a gasket under the head and under the muffler elbow . Their great advantage is their low price, so that we can immediately buy a spare pair (in case due to a mistake we have to assemble the engine again)They are made of good cardboard and fit almost perfectly. I wrote almost, because in places such as where we put on the gearshift apparatus, or where the piston comes out, they need to be trimmed by our own hands. Such a state of affairs is, of course, understandable and poses absolutely no problem, since, after all, each of us has scissors at hand. Below I attach a photo that shows each of the gaskets purchased. I would show how they look in the already assembled engine, but for the reason that their purpose is to seal and not to be conspicuous( In the assembled engine they are almost invisible) I will, however, limit myself to the above-mentioned photo ;D
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-02, 01:19
Michał
Romet Komar 3 1975 Dezamet 023 engine The quality of the rubber looks very good, as for the lintels which are very thin in its connection are very easy to remove with scissors, skillfully arranging the rubber to be comfortable, which does not take away from the fact that it is a product that simply looks good,the fit is good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-12, 13:35
Paweł
Romet Ogar 200 I overhauled the engine in the ogar and used these gaskets.The engine does not leak does not take air as well as oil.To be sure I lubricated the gaskets with silicone, but through my fault would have uneven adhesions.If you have a perfect adhesion is traditional gasket and grease.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-19, 21:01
Krzysztof
Greetings. I put this product on a 1977 WSK Garbuska motorcycle. It attaches well to the levers, holds firmly (does not slide off ) The appearance is also suitable for this type of motorcycle. I recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-12-24, 22:54
Krzysztof
Jawa 50 vintage 1979 in the process of restoration. I recommend the product met my requirements. I think I will be satisfied with it. There were no problems with the assembly, it looks like everything will be ok after screwing the whole thing together.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-02, 02:07
Michał
Romet Komar 3 1975 engine Dezamet 023 Seger looks qualitatively good, aesthetically packaged you are sure it will not get lost somewhere, it will be useful for folding engine jawoski 223
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-22, 19:17
MARCIN
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-29, 16:23
AnoniM
The seals are of very good quality,they are fitted, and made of good material. I recommend to all who want to pay a little extra but have a decent product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-16, 12:51
Jakub
The spigot decently made, a little different shape than the original, making the gasket fit poorly at times. Installation without problems. Jawa 20 armored.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-01, 15:36
Adrian
Romet Ogar 200 capacity 50cc year 1980 items that I buy on gmoto.pl are good fit well and I have no complaints about the parts.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-31, 18:53
Szymon
I bought the nut for a 1980 Jawka M23 with a capacity of 49 cc. The nut fits twists and even unscrews. Such a cap unscrews.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 13:07
Simson
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-31, 18:34
Szymon
I purchased the parts for a 1980 Jawka M23 with a capacity of 49 cc. The safety device fits, I had no difficulty putting it on.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-09, 09:53
Krystian
Motorcycle M2.Feet well made,quality as much as possible on the plus side,well fitted,I am satisfied with the purchase.I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-29, 16:48
AnoniM
Romet Ogar 200 bushing performs very well. I recommend this product as much as possible. I have no reservations.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-06, 07:52
Kaare
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-02, 09:54
Michał
WSK m06 B3 1983r quality very good , the installation went very smoothly without any problem. I recommend the product in 100%
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-14, 16:06
Michał
Romet Ogar 200 - the sprocket fits perfectly, does not wear quickly and fits perfectly, is well shaped. The sprocket is more suitable for mopeds in super condition, after a light tuning, otherwise the engine will not have the power to accelerate the vehicle on this gear ratio except downhill, three will be very distant, even unusable. Vmax increases by 10km/h, but, unfortunately, at the expense of acceleration and overall power - I recommend only for flat areas, where there is no wind. Z11 - 55km/h (mountains, climbs, offroad, dirt roads) z12- 60km/h (hills, gentle climbs, gravel roads) z13 - 65km/h (flat terrain, asphalt, no wind) The most versatile will be the 12z sprocket, where at low power starts we gain 60km/h, so that in the city we will reach a (real) speed similar to the cars moving past us.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:48
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:49
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:49
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:48
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-17, 18:59
Konrad
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-03, 10:26
Jacek
Gaskets very thin, despite having the carbs in super condition like factory! No marks from screwdrivers or other unsealing tools. And so I had to use a thin layer of silicone for safety. In addition, the fit of the gaskets at an average level. Because of which, especially those from the carter, I had to "stretch" so that they fully covered the surface of the half, and not half in a given place. But it is possible to fold on it. ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-01, 15:37
juan
Like the first gasket papers awesome awesome how well they do their job not one oil leak spectacular awesome awesome awesome I am tremendously grateful for selling such a good quality material ole! ostia lk asbestos are even better for exhaust systems gay god my what a cojonuda solution is wonderful and cuts very well I recommend it more than 200%.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-06-12, 21:55
Boszu
NOTE: This is not in the description, it is only given the internal dimension of 13mm. But! After buying this bushing is required to ream it to the dimension of the piston pin. (That is, about 14.1mm) Beyond that, the outer dimension if the connecting rod is not worn in any way, it fits perfectly! (Another note, it is necessary to heat the connecting rod and cool the bushing so that it slips in without beating with a hammer or other tool)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-03, 22:31
Hubert
Hello, I ordered a rope for romet ogar 200 and this is what I was looking for! The cable is really very good quality and solidly made. Very easy and efficient installation. Of course, it does its job as it should. Here is the point. Everything fits perfectly for which a big +. Flexible which makes installation very easy. I really recommend. Regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-12, 08:12
Mateusz
If any motorcycle you have, Whether it's new or old, the one you always take care of, On Gmoto take your bearings!!! They super parts have, and will reliably help you, They take great care of the customer, in summer and severe winter. Whether you would order one part, or deliver the whole stack, You will boast in happiness today, Your fate is important to them.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-12, 08:12
Mateusz
If any motorcycle you have, Whether it's new or old, the one you always take care of, On Gmoto take your bearings!!! They super parts have, and will reliably help you, They take great care of the customer, in summer and severe winter. Whether you would order one part, or deliver the whole stack, You will boast in happiness today, Your fate is important to them.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-04, 22:32
Piotr
Romet Ogar 200 and they fit quite well. Between the crankcases I did not use silicone and still does not leak. (but in general, in old equipment, however, between the crankcases I recommend using, in addition to the gasket, sealing compound, because it is known in what condition most of the crankcases in these equipment, but I just have in very good condition). I recommend:)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-05, 09:55
Marek
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-14, 20:41
Marek
The new foot rubbers add a unique charm to the Mosquito. Rubbers glued with tape or even exposing bare wires are no longer frightening. The rubbers purchased in the store are of very good quality, fit perfectly and are even the so-called icing on the cake in the process of renovation and completion of the Mosquito. A small thing but happy.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:41
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-03-13, 20:19
Jakub
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-22, 17:58
Patryk
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-14, 08:41
Daniel
I ordered parts for ogar 200 year 89 Plates very good quality, installation went without any complications. I recommend Gmoto the best parts at great prices only at them. Express shipping, of course InPost oaczkomaty, the most convenient form of shipment, I received the package after 11 p.m. I recommend!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-08, 15:12
Arek
The drip cap which I ordered from your store for my romet ogar 200 turned out to be a very solid and good product. Not once have I ordered such a cap for romet from other websites, but from your store it turned out to be the most solid product made of very good material.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-26, 17:17
Jakub
Good rubbers for wski 175, the material is very good, much to be said is unfortunately lies in the aesthetics and fit. A lot of overlap hard to remove; rubbers are hard to get on the footrests, for about 40 minutes I was struggling to get them on, no less I recommend :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion






























