Forgot password
Order status
Free delivery from 150 euro
Motorcycle suspension - Rear
WSK 175
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
WSK 125 Hunchback. I have serious doubts, because compared to the original they are much smaller. I.e. the fit is ok, the bushing fit is also ok, but they have definitely less meat. We'll see how they'll perform while driving; for now I don't have a way to test it. In the photos on the left the new one, on the right the old one.
Review translated automatically
Reliable opinion
WSK M06 B3 "Hunchback" 1975 installation of shock absorbers proved to be trouble-free. Thank you for the videos on the YT channel Gmoto.pl, very helpful for an amateur. ;-) A product close to the original shock absorbers of more than 40 years ago! They fit perfectly.
Review translated automatically
Reliable opinion
WSK 125 1982 This reinforced version is flawlessly recommendable. Workmanship very aesthetically pleasing and at the same time solid.
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Bushing made carefully and accurately dimensions conform very good quality electroplating.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. In my case it fits flawlessly without modifications. The holes ok. Importantly, nicely galvanized ;)
Review translated automatically
Reliable opinion
WSK 125 B3 1979. The bushing fulfills its role 100% Dimensionally it is exemplary, material and aesthetics also ok.
Review translated automatically
Reliable opinion
Tensioners solidly made. Everything fits as it should. Galvanic coating also at a high level.
Review translated automatically
Reliable opinion
The polyamide bushings received are for du. The copies received do not even have the dimensions from the item description. The outer diameter is larger by about 1mm, the inner zas about 1.5mm. I also ordered a set of metal bushings that go into the polyamide bushing, and in the order I asked to check before shipping whether the bushings go into one another. Of course I was pounced upon. I already have 4pc of polyamide bushings from gmoto at home, none of them hold the dimensions from the description, 100zł psu in d. What is this Chinese millimeters are some bigger? I'll probably end up having to go to a turner and turn a metal bushing. If I had known I would have saved 100zł and time. Don't buy this
Review translated automatically
Reliable opinion
Bought for a 1975 WSK M06b3 Hunchback. They fit perfectly. I mounted on new M12x1.25x55 stainless steel bolts. It's hard for me to judge comfort and handling yet because they only hurt with a test round around the chimney, but they look good. At first glance very similar to the originals. On the plus side, the hardness - spring travel adjustment.
Review translated automatically
Reliable opinion
WSK 125 Hunchback. I have serious doubts, because compared to the original they are much smaller. I.e. the fit is ok, the bushing fit is also ok, but they have definitely less meat. We'll see how they'll perform while driving; for now I don't have a way to test it. In the photos on the left the new one, on the right the old one.
Review translated automatically
Reliable opinion
WSK 125 Hunchback. I have serious doubts, because compared to the original they are much smaller. I.e. the fit is ok, the bushing fit is also ok, but they have definitely less meat. We'll see how they'll perform while driving; for now I don't have a way to test it. In the photos on the left the new one, on the right the old one.
Review translated automatically
Reliable opinion
WSK 125 M6B3. On the original control arm axle, the bushing has noticeable play. Outer dimension as described ( but still to be rolled because the received polyamide bushing has a smaller dimension. Inner diameter too large 18.25mm. I wonder-but probably to the trash. The lathe will fit me the bushing to size.
Review translated automatically
Reliable opinion
Everything fits as it should, a little oil and sits elegantly, the material very good and above all hard, workmanship aesthetic , no burrs after machining. I buy on gmoto since June when I bought my wsk and so far I am satisfied.
Review translated automatically
Reliable opinion
Wsk 125 from 1979 tensioners are good but the nuts are not suitable they have too narrow a groove into which the sniffer enters and they are not suitable you can saw it off but then they will rust because the zinc will be damaged and you would have to re-galvanize them.
Review translated automatically
Reliable opinion
Length like the original. Nicely made aesthetically flawless. Only I had to sand it gently with fine sandpaper because it did not want to press into the wheel. There was a place that something was blocking it but the paper helped.
Review translated automatically
Reliable opinion
Tensioner made and protective coating very well . But when it comes to the bolt . It does not fit the original rocker arm either in diameter or thickness of the cutout . I had to roll it and then fit it perfectly .
Review translated automatically
Reliable opinion
The goods as described. However, for wsk 125 the axle is a tad too long. The quality is good. The appearance is a little different from the original. As for the store is very good professional approach to the customer. Nice and pleasant. A sizable assortment.
Review translated automatically
Reliable opinion
Jawa 350 638.0 Ammors fit perfectly. The quality of the product very good and the price even better. It presents itself nicely. I think it will ride much better than on the old worn out shock absorbers. I recommend :)
Review translated automatically
Reliable opinion
I own a 1972 wsk garbuska the tensioner nut is not suitable for installation it is too big without modification there is no possibility of installation as for the tensioner itself when it is pressed harder it can break
Review translated automatically
Reliable opinion
Finally someone sells a good quality tensioner, firstly it is solidly welded, secondly the nut fits on the control arm! Previous ones from Allegro were cheaper unfortunately they are only suitable for Scrap. Recommends Gmoto
Review translated automatically
Reliable opinion
Very good quality product, everything fit perfectly, made of decent material, so I know it will last a long time. The assembly of the parts was fast and trouble-free. I recommend the parts from the store.
Review translated automatically
Reliable opinion
Very good quality product, everything fit perfectly, made of decent material, so I know it will last a long time. The assembly of the parts was fast and trouble-free. I recommend parts from the store
Review translated automatically
Reliable opinion
Hello, I own a Jawa 350 TS. I bought shock absorbers from Gmoto store and I am really satisfied the quality of workmanship in relation to the price exceeded my expectations. I recommend them as much as possible.
Review translated automatically
Reliable opinion
WSK 125 M06B3 - shock absorbers well made, fit perfectly. You have to look closely to realize that they are not originals. And the ride became better :)
Review translated automatically
Reliable opinion
Wsk 175 M21W2 Hunchback. The glass fits perfectly into the shock absorber, it has the right diameter in relation to both the spring and the top glass.
Review translated automatically
Reliable opinion
I'm working on restoring my fourth WSK 175. I've been a Gmoto customer for years and have been very happy with my purchases so far
Review translated automatically
Reliable opinion