Standard cylinders - Page 15

2019-01-09, 08:17

View original

Monika

Cylinder set gy6 4t 50cm 39mm moretti very well made with attention to detail fits without any problem I recommend to everyone

Review translated automatically

Reliable opinion

2022-10-03, 16:41

View original

Aleksander

This set looks very good. It is packaged in an aesthetically pleasing box and solidly protected with foil and styrofoam. It will be possible to judge the quality of the materials only after the engine is mounted and running. So far I have noticed a considerable (but acceptable) clearance between the piston and cylinder. The rings seem to meet the standards for clearance. Users have reported problems with cracking pistons - most often this occurred near the pin mount. I hope that this problem has been corrected. Grooves for locking rings seem to be deep enough and with the right (semicircular) profile. On the other hand, the safeties themselves do not inspire confidence. If the quality of the materials and the accuracy of the machining resulting in reliable engine operation will match the appearance, I will be delighted.

Review translated automatically

Reliable opinion

2025-05-23, 12:25

View original

Luboš

mounted to honda xr125l, only need to grind the crankcases / turn the cylinder on the lathe to fit the crankcases, because the cylinder skirt has a larger diameter than the crankcases will fit. The cylinder fits nicely, it runs, you can already see the power furniture in the lower revs. The piston knocks, the piston knocks, it's not the valves or anything, it's the piston. Because the clearance between the piston and the cylinder is too big. It's generally supposed to be around 5 hundredths of a millimeter, but I measured 33 hundredths from the bottom of the piston and 63 hundredths from the top of the piston. The piston is hard to find, I found one here on the eshop, so I just pray it comes and has the right dimensions, that mine in the kit was just a dud...

Review translated automatically

Reliable opinion

2024-01-28, 11:44

View original

kacper

Very nice store, reasonable prices, fast delivery, well packaged, the cylinder whole without damage I ordered about a year ago and it serves me until now, very nice service, in most online stores you can not get along at least in my case when I ordered the cylinder and here without a problem so I rate 100/10 c:

Review translated automatically

Reliable opinion

2019-06-26, 21:48

View original

Dominik

The cylinder was purchased for a 1997 Peugeot Speedfight 1 liquid-cooled with a standing engine. The first impression was very good because of how the manufacturer packaged the product. After unpacking it made a very positive impression, the quality of workmanship and materials. After installation, everything works as it should. I recommend

Review translated automatically

Reliable opinion

2024-09-20, 05:50

View original

Patrick

Hello, I'm delighted to have ordered this part for my 50cc scooter, I'll spread the word to all people who want to order scooter parts to order from you is good quality and delivery is fast and it gives a lot of advice. Have a nice day. Sincerely

Review translated automatically

Reliable opinion

2023-08-01, 07:47

View original

Bartosz

As for a cylinder for 200zl it is really ok I think that for this price you will not find anything better' in my copy it was necessary to slightly correct the channel with a file because there was such a burr, but yes it's all class, in short I recommend as much as possible as someone does not want to load a cylinder for 1000zl

Review translated automatically

Reliable opinion

2021-11-02, 07:07

View original

Łukasz

I've been 'chatting' about a cylinder and piston for a long time. These were the only parts I was missing to fully complete the parts for my Junak. A new, professionally made part, and a super price. Waiting for installation in my motorcycle. I will definitely come back to you!

Review translated automatically

Reliable opinion

2020-01-17, 21:22

View original

Daniel

Cylinder very nice.Except for one problem is a slightly wider bushing where the cylinder enters the engine and it is not possible to put the cylinder on But the lathe guy for 20 zlotys gathered the bushings a little and everything goes as expected

Review translated automatically

Reliable opinion

2021-11-02, 20:19

View original

Mariusz

Junak M10 from 1963 I bought a set of cylinder, piston, rings, pin, protections. Complete set, no shortcomings, does not deviate from the original. 100% satisfaction you install and ride, I recommend to everyone. Regards.

Review translated automatically

Reliable opinion

2024-09-23, 12:45

View original

Rafał

Cylinder made 100% like the original all dimensions correct. The cast iron is sufficiently gray ,aluminum properly silvery, gaskets super tight and turbo rings springy. I recommend

Review translated automatically

Reliable opinion

2020-05-15, 06:46

View original

Marek

Very good quality product. It has no manufacturing defects fits perfectly yet I have never been disappointed with these products

Review translated automatically

Reliable opinion

2025-04-18, 21:21

View original

oscar

Everything perfect. It fits perfectly. You just have to follow the manufacturer's instructions. Let's wait for the result.

Review translated automatically

Reliable opinion