Buy as a set
New carburetor for motorcycles WSK 125, WFM MO6, SHL M06 M11, OSA M52
| Manufacturer: | Venbo |
|---|---|
| Manufacturer id: | 78008 |
| Guarantee: | 12 |
- G20 model - it adjusts without any problems
- is not the cheapest product on the market, but a high quality product
- complete - has: throttles, spring, needles, float, adjustment screws
- Delux quality product !!!
- highly recommended for antiques - proven on many WSK 125 motorcycles
- filter mount diameter: 35 mm
- throat diameter: 20 mm
- diameter per spigot: 25 mm
- height: 135 mm
- length: 69 mm
Gmoto.pl Paweł Cebulak, Tadeusza Kościuszki 78, 37-100, Łańcut, PL, [email protected]
Worth buying
Product reviews
-
Gaźnik wart swojej cenie , wygląda jak oryginał i działa WSK lepiej niż na oryginalnym . Nie warto inwestować w droższy gaźnik jak ten robi robotę .
Review translated automatically
Reliable opinion
-
Silniczek po kapitalnym remoncie, pięknie chodzi na tym gaźniku. Polecam i kupiłbym drugi raz na pewno.
Review translated automatically
Reliable opinion
-
The carburetor looks good, neat but you can see that it is not the same quality as the original. There are lint in many places that have to be removed by hand. To install the line you need to remove the firing pin and this is an art. The firing pin mounting plate was poorly made, thin and bends. We will see how it will perform.
Review translated automatically
Reliable opinion
-
Carburetor revelation, adjusted as needed. Quality of materials at a high level, shipment expeditiously .RECOMMEND!!!
Review translated automatically
Reliable opinion
-
Förgasaren verkade riktigt välgjord och har god precision i sina komponenter. Dock lite dåligt gradat inuti trottelhuset, med det är enkelt att åtgärda innan förgasaren tas i bruk. Mycket humant pris. Bra packat. Rekommenderas varmt.
Review translated automatically
Reliable opinion
-
Everything OK - solidly made and functional because after installation immediately WSK fired up and caught the revs without a problem. Product as described I recommend 100% satisfaction.
Review translated automatically
Reliable opinion
-
Very good workmanship, lack of any defects the whole set perfectly spoils , professional attitude to the customer and delivery time, I recommend everyone to buy on g.moto
Review translated automatically
Reliable opinion
-
The product made a little for art to the original it is far from it screws for adjustment terribly loose, springs a little too weak.
Review translated automatically
Reliable opinion
-
I bought parts to restore my WFM 125 1956 - unfortunately originally there was a G16 carburetor but I could not get one I bought a G20 and that meant that I had to make an adapter to fit the carburetor to the cylinder . Everything worked out the engine smokes . Express delivery , contact super . I recommend
Review translated automatically
Reliable opinion
-
WSK B1. First of all, the carburetor matches the other parts of the era, it goes well with the rest of the engine, it can be adjusted well, and it is also a solidly made carburetor. I recommend it.
Review translated automatically
Reliable opinion
-
The carburetor fit very nicely aesthetics very nice easy to adjust the screws from the rotation can be tightened AND unscrewed with your fingers.
Review translated automatically
Reliable opinion
-
The carburetor arrived damaged unfortunately, a stamp from a motorcycle repair company is needed to make a claim
Review translated automatically
Reliable opinion
-
Warm welcome. WSK B1 1969.The carburetor fits well with the rest of the motorcycle so there was no problem with the installation as well. The cable fits well. Tight carburetor can be adjusted well, set the right dose of fuel and air. The appearance is also good resembles a carburetor from the era and what is important is that the parts from the old one from the era fit the new one so you can do a bit of fiddling. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
-
WSK from 1969, the so-called two-frame. The carburetor, first of all, matches the rest of the parts from the era, goes well with the rest of the engine, can be adjusted well, listens to me ;) it is also a solidly made carburetor does not leak and you need really great skills to break it down. I recommend it
Review translated automatically
Reliable opinion
-
The heater works without the board ,good speed control but the workmanship and material quality could be better.
Review translated automatically
Reliable opinion
-
WSK 125 KOS year prod.1984 Purchased carburetor aesthetically made of very good material, after installation can be easily adjusted, which resulted in even engine operation. I RECOMMEND THIS PRODUCT
Review translated automatically
Reliable opinion
-
Carburetor G20 WSK 125 I recommend carburetor very well made nothing different from the original the engine runs very nicely there is a possibility of adjustment.I own Wsk 126=5 b3 1981
Review translated automatically
Reliable opinion
-
The carburetor of good quality as well as aesthetic is no different from the original. Good regulation as well as performance I personally recommend
Review translated automatically
Reliable opinion
-
The carburetor is modern but well made. after firing it works nicely, it can be adjusted to make the WSK "pyrkaka".I recommend
Review translated automatically
Reliable opinion
-
Product fitted, aesthetically finished. Installed, efficient. High-five, no reservations about the material it is made of
Review translated automatically
Reliable opinion
-
Purchased a carburetor G20 wsk 125 used for winter overhaul of a soil planter wsk mrówka I rate the purchase at 5- the quality and fit everything really ok as for the adjustment responds nicely for such money I recommend .
Review translated automatically
Reliable opinion
-
Review translated automatically
Reliable opinion
-
Carburetor very good quality, consistent with the original and most importantly the engine runs evenly on it. A good alternative to the original carburetors with which there is a problem even after regeneration.
Review translated automatically
Reliable opinion
-
WSK 125 M06B3 hunchback - carburetor fits perfectly. Very good quality. The engine runs evenly and accelerates nicely. Interestingly, the carburetor is dry, even after a long ride!
Review translated automatically
Reliable opinion
-
wsk 125 humpback 1977r total failure crookedly cast does not fit the stub coming out of the cylinder the clamp had to be given from the old carburetor all the plastic gaskets
Review translated automatically
We sincerely apologize for the situation, you have the opportunity to submit a complaint request : https://gmoto.com/returns After that, the complaint officer will try to contact you in order to resolve it positively.Reliable opinion
-
Carburetor perfectly compatible with the original engine is easy to tune with it works evenly without interference clamp included
Review translated automatically
Reliable opinion
-
WSK 125 1962. THE EXTERNAL DIAMETER OF THE AIR INLET IS LESS THAN THE ORIGINAL, AND IT WAS REQUIRED TO REPLACE THE AIR FILTER, THE GASMER FILTER WAS BROKEN AND IT WAS REQUIRED TO REPLACE THE FILTER FROM THE OLD GASMER.
Review translated automatically
Reliable opinion
-
wsk 125. very well made product, does the job, easy to set up, everything eventually fits
Review translated automatically
Reliable opinion
-
WSK125
Review translated automatically
Reliable opinion
-
For a contemporary production, this is good
Review translated automatically
Reliable opinion
-
WSK 125 year 1983 Goods as described
Review translated automatically
Reliable opinion
-
wsk 125 1963 perfect
Review translated automatically
Reliable opinion
-
Review translated automatically
Reliable opinion
-
I am very satisfied with the quality o service. Goods always as described. Instant delivery. I sincerely thank you.
Review translated automatically
Reliable opinion
-
Good.
Review translated automatically
Reliable opinion
-
All the parts I bought work very well,workmanship very good
Review translated automatically
Reliable opinion
Questions & Answers
Have a question about this product?
No one has asked a question about this product yet. Be the first and get an answer from our community or experts!