Forgot password
Order status
Free delivery from 150 euro
Motorcycle cylinders - Page 4
Most popular manufacturers
Manufacturer
Price
Sort
from 28
Browse Motorcycle cylinders - Page 4 by manufacturer
Products reviews
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
Reliable opinion
I installed in a 2010 Barton Fighter moped. After mounting the moped clearly came alive, it became very sprightly, the top speed also increased. After starting from first gear it can sweep the wheel, and after releasing the clutch faster it stands on the wheel, also when shifting to second gear the front end likes to lift gently. Overall, for this price I can confidently recommend this cylinder to everyone. I recommend 100%
Review translated automatically
Reliable opinion
SHL M11 175cm3 1964. The kit met my expectations.I had no problems with installation. The engine works very well, has a very good compression.From the appearance indistinguishable from the original and even I am tempted to say that it looks better.I recommend a good alternative when the original cylinder is no longer suitable for further grinding.
Review translated automatically
Reliable opinion
Zipp Rooster 50cc 2008 AC I am 100% satisfied with my purchase. Easy installation, everything fit perfectly. The product has met my expectations. Currently drove about 2500km on this kit and no problems. Everything made with attention to detail.
Review translated automatically
Reliable opinion
I have a Junak 901,I bought this kit because the motorcycle was already quite weak. I did the assembly for the first time, and it took me some time. So far I'm lapping , and I have no problem. I think Moretti products , are good parts and recommend.
Review translated automatically
Reliable opinion
Gilera stalker dd 2001 I do not recommend it a waste of money the piston it can immediately give to the purchase because only there it is suitable scooter at a distance of 2 km goes out with 5 times the piston swells please withdraw this product that the store
Review translated automatically
Reliable opinion
I highly recommend gmoto company quality of workmanship is very good cylinder for wsk 125 as for low price is very good no signs of swelling I highly recommend the set
Review translated automatically
Reliable opinion
Recommended website fast shipping all forms of payment with quality I'm satisfied with the cylinder everything laughs as it should so I recommend!
Review translated automatically
Reliable opinion
Product very well made great fit for motorcycle with 139qmb gy6 engine. The description of the goods is very accurate and with the real.
Review translated automatically
Reliable opinion
Cylinder MCN 80cm3 4T cylinder a very good class cylinder gives a lot of power I recommend to all who want to increase the capacity of the scooter recommended
Review translated automatically
Reliable opinion
Products are as ordered well packaged. The company helpful explain everything you can count on them. I recommend to everyone :)
Review translated automatically
Reliable opinion
Quality of workmanship of the cylinder super fits flawlessly gaskets fit perfectly cylinder fits perfectly to the nominal head
Review translated automatically
Reliable opinion
Generic Trigger. Cylinder easy to put on, well, tightly packed during transport. It met my requirements.
Review translated automatically
Reliable opinion
I own a motorcycle SHL model M11 capacity 175 ccm from 1967.I purchased in Gmoto a set consisting of a cylinder, piston, ring pin and seals in the hope that after replacement there will be no problems with seizure of the whole. And I was not disappointed. The whole thing came in a sturdy package with a Styrofoam insert. The cylinder casting was neatly machined and was well-fitted to the piston (an unmounted piston in a vertically aligned cylinder sinks slowly with small jumps). The piston had a nicely machined arrow (not all new Far Eastern pistons have one) and was very well fitted to the pin. Organoleptically, I found that the quality of the materials was flawless. But the most important thing turned out to be the operation. After installing the whole thing in the motorcycle and running-in, there is no problem with starting the engine, there is power and, most importantly, there is no engine seizing and blocking. Hence the conclusion that the whole thing was made of decent alloys.I will only add that so far I had installed a new cylinder and piston probably of Chinese manufacture purchased on a well-known auction site, the name of which I will not mention. Due to the poor quality of the material and high thermal expansion of the metal used, the piston often seized in the cylinder, which made further driving impossible. Ultimately, I believe that the proposed kit is a very good choice.
Review translated automatically
Reliable opinion
Cylinder bought for WSK 125 M06B. The quality of the product to the price sensational.First of all, made of cast iron, which in my opinion wins over aluminum.Installation went without the slightest problem. The kit includes everything you need.For this I received two rings free of charge and the quality of the rings itself is sensational.For the first time I met with anodized coating on the rings to wsk.After assembly fired up from the "kick".Compression is elegant and moto is again able.Nothing rings and no noise.After the first rides I can comment only on the big plus.How with the durability I do not know, although ordering this kit for such a low price I did not expect revelations and after unpacking I was pleasantly surprised.I recommend as much as possible.Super seller.If I need something from the assortment of motorcycles I always order from GMoto.
Review translated automatically
Reliable opinion
The product is good quality and affordable. Before purchasing, it is advisable to accurately dimension the set used with us and more specifically the parameters such as: 1)height of the cylinder 2)diameter of the cylinder 3)pin spacing 4)size of the piston pin 5)shape of the bottom of the piston we can distinguish here 2 types bottom concave and convex The next step for trouble-free operation of the engine is proper installation, cleanliness of work, cleanliness and verification of parts before installation, selection of appropriate gaskets including new oil seals with oil channel sleeve, proper installation of rings remembering about their offset from each other, lubrication of the set with the appropriate engine oil.
Review translated automatically
Reliable opinion
Wsk 125 B3 What can I say about it.I got the cylinder together with filings from all the machining mixed with oil.I had to clean the cylinder in oil and gasoline for half an hour.At first the piston stopped in the middle of the cylinder.But after cleaning from all this "gift" it started to flow normally through the cylinder.I had to clean the cylinder with petroleum and gasoline.At first the piston stopped in the middle of the cylinder, but after cleaning all this "gift" it started to flow normally through the cylinder.
Review translated automatically
Reliable opinion
I have now bought this product for the second time as the piston was damaged after a short period of use. In contrast to the first delivery, the piston was pre-assembled with rings and the upper piston rings are now clearly different, as they should be. The first delivery came with two identical copper-colored piston rings, which probably caused the damage. In terms of quality, everything is clean and fits perfectly. However, the bore in the motor housing needs to be adjusted. (Only for professionals) The set provides significantly more power but no increase in speed.
Review translated automatically
Reliable opinion
I am very happy with my purchases on gmoto I bought it as a gift to my boyfriend. Today he went mounted the cylinder to the scooter without any problem, everything fit perfectly, installing the parts in place did not cause any problem. Quality very good. The execution of the parts when it comes to aesthetics revelation. Parts replaced independently in a short time, the scooter works without any complaint. Smile on the face of the boy without price. I am terribly satisfied. I highly recommend shopping at gmoto. I have no regrets and will certainly shop here again if needed Thank you ;)
Review translated automatically
Reliable opinion
Good day. I own a 1977 wsk 125 motorcycle. I recently purchased for my bee cylinder piston rings bushings and gaskets. I must admit that the goods I received are solidly and precisely made aesthetically is also ok. The assembly went without the slightest problems and complications, everything fit together. Now my bike is working fine again. I would like to thank Gmoto company for solidity and accuracy of workmanship. I sincerely recommend Gmoto. It is a great asset to be such a respected company. Best regards Grzegorz.
Review translated automatically
Reliable opinion
WSK 125 1980. The cylinder is not "cast iron" - It is aluminum. Only the "glass" of the cylinder is cast iron. This is what I was aware of during the purchase. This is a replica of the so-called "aluminiak" from the People's Republic of Poland - the number of ribs is correct - the workmanship is also bdb, but there is no rubber damping between the ribs. The piston and pin are some kind of "arbitrary" - the pin is too long according to the original, but the rings are great! I recommend to compose such a set: cylinder and rings from this set plus Almot piston and pin.
Review translated automatically
Reliable opinion
WSK 125 / Cylinder even even but it has 2 less ribs and as if to say in botanical terms. were arranged alternately :) , channels not very even and besides this cylinder is a Polish import, not production. Despite this WSK runs nicely, we'll see how it will perform in the perspective of longer use. More care in casting and it will be great :D !!!
Review translated automatically
Reliable opinion
Yamasaki Kingway: - the fit of the piston to the cylinder is of a high standard -the bolt fits perfectly -unfortunately, the head gasket arrived deformed, and the cylinder gasket arrived broken, so both were fit to be thrown away -after 200km after putting it together, the engine runs by the book, I have not observed oil in the combustion chamber, the compression is at a good level.
Review translated automatically
Reliable opinion
Aprilia SR 50 AC cylinder fits very perfectly beautifully made nothing sticks out no blemishes on the outside no ducts can be seen no holes nothing sticks out inside which greatly affects the quality and flow resulting in smooth power output and life tests but the predecessor of unknown origin seized up after 10 km deflated like a balloon
Review translated automatically
Reliable opinion
Hello, I got the order quickly, in the set were additionally a set of ring, but there was no gasket under the exhaust, In the picture there is a gasket but not such because there goes with paranita paper, flat, it fit perfectly,. I made out in 2 hours by flashlight .I offer to buy a bearing under the piston. TGB 101 scooter .super )) .
Review translated automatically
Reliable opinion
Hello I naprowiam skutrey,Qady etc.Ordered parts really are OK . If you order a good part, it rather has to fit, personally as a mehanik I recommend cylinder 65cm for GY6 4T IS in my opinion the best, fragile, 50 has too little power, 80 can take oil in a short time exploatation Greetings
Review translated automatically
Reliable opinion
I bought this product not long ago for now I'm still lapping but already a lot of cool things I noticed such as very good fit, workmanship very good and with good materials and in addition cheap. The power gain with the 95 nozzle and Gianelli Extra VW exhaust is unbelievable. I sincerely recommend it highly.
Review translated automatically
Reliable opinion
Very good build quality. The head with larger valves to this plus the replacement of the main nozzle in the carburetor gives incredible power. And if you replace the gearbox with more teeth in the engine it flies like a storm. 2 times faster and much more powerful. I sincerely recommend. I have taken a lot from this store and everything great.
Review translated automatically
Reliable opinion
Generally everything is ok. except that for pocket bika when repositioning the cylinder it turns out that the original engine does not fit the bearing on the pin. The piston and piston pin are slightly larger, which makes it impossible to change.You still need to buy separately the appropriate bearing to fit the piston pin that we ordered.
Review translated automatically
Reliable opinion
Cylinder solidly made. With the ring channels worse . I family well lubricate with oil . Because it went into the channel for me and stuck . After lubrication it was all right . After assembly and test drive was felt a very big jump in power . I recommend to all who do not like to overpay .
Review translated automatically
Reliable opinion
WSK 125 M006 B1 1970 I do not recommend !!!!!!!!!! After installing the kit wsk had no power, compression was great, but the power was zero.Probably badly cast channels.SYF!!!!! shame to sell such parts.Gmoto gave the money back.How much time spent on additional work priceless
Review translated automatically
Reliable opinion
Fits morini motor mounted on a tgb bullet AC 50cc 2t. Unfortunately, the engine starts up but doesn't work properly, until it starts to squeeze after the first 100 meters! The assembly having been carried out in accordance with the required procedures and the prior adjustment of the intake.
Review translated automatically
Reliable opinion
In a while it will be a year since I put this kit on my moped, the scooter is more powerful compared to the original cylinder. During this time I have not spared my machine at all and yet nothing has gone wrong. The price of the kit is good compared to the quality.
Review translated automatically
Reliable opinion
Zico simpli 2t, 2006r, 7500 km mileage, unfortunately, but the cylinder did not meet my expectations, the poor quality of workmanship unfortunately determined the decision to return the product, the cylinder had fatally finished windows in the sleeve, I was afraid that the rings would begin to hook against them and crack,
Review translated automatically
Reliable opinion
The fit of the cylinder with the piston without complaint but the piston itself in the place where the head from the shaft should be, along with the needle bearing, gives a lot to ponder the casting in this place should be more fit I hope they will correct it. regards!!!
Review translated automatically
Reliable opinion
The cylinder is of good quality, the only thing I would complain about is the quality of machining of the flushing channels. They are not symmetrical with respect to each other (I mean those smaller flushes) but what to expect for such a price? For this kind of money anyway it is mega positive.
Review translated automatically
Reliable opinion
the cylinder itself is great and the piston all the seals and piston rings . it's supposed to be a plug and go cylinder . NOT I have a jawu betka/kentoya twinshot and need to buy a new head because the original camshaft is not enough and need to adjust the valve .
Review translated automatically
Reliable opinion
The cylinder fits perfectly to the engine 139FMB, the moped after such tuning laughs beyond recognition, I wanted to emphasize that I did not replace the gasser, it is the original from the fifty, only the nozzle replaced with a larger + head and everything runs perfectly.
Review translated automatically
Reliable opinion
Tgb sky 50 2006 Cylinder as well as piston very good workmanship. It ran for 4 seasons and would still run But I persuaded another new one,recommend. Combined with the sports exhaust it is very ripping and fast. Greetings Gmoto team.
Review translated automatically
Reliable opinion
It got to me clean and exactly how it was in the pictures. All parts were oiled so it was easy to install. I already have driven with it and it works just fine and really boosts the power of the engine. I recommend this to everyone
Review translated automatically
Reliable opinion