Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
Romet Kadet 50
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
The holder solidly made thick plates with a special slide-out. The holder for p21/5w bulb touches both plates on the sides and style and the bulb shines on 2 filaments. The quality is very good, you can feel that it is not the cheapest holder, but well made and fitted to the lamp. I sincerely recommend and Greetings Marcel Blacharski
Review translated automatically
Reliable opinion
The purchased headlight glass is of the highest quality, without any blemishes, in short the original . Exemplary workmanship, finish safe for the user. Dimensions in accordance with the description. As you can see from the photos wide application.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
Romet ogar 205 year 1986. lamp fits, very good workmanship everything works electrics perfectly routed inside, i recommend this lamp similar to prl lamps
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
I was looking for a long time for a good lamp for my Romet naazczescie found on gmoto. Assembly banalbie simple and satisfaction guaranteed.
Review translated automatically
Reliable opinion
The lamp is very close to the original from the era, it fits perfectly on my 1970 Komar 2330 which I am currently restoring.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
Motorcycle M2.The lamp is very well made,shines nicely.The price-quality ratio-revelation.I recommend the purchase !
Review translated automatically
Reliable opinion
Komar 2350 , lamp very nicely made , almost like the original, the lamp seems a little smaller
Review translated automatically
Reliable opinion
The lamp is identical to the original. Plastic and glass parts well made, precise finish. The lamp comes with a clear instruction manual with cable numbering, which helps when connecting. The lamp also has a light switch and an ignition switch, so we have the problem of an additional element out of the way. When assembling, you need to pay attention to the attachment of the cover of the optical element, you can use a rubber mallet for this, because pressing by hand will not do much. In addition, you should take care to clean the holes of the metal plates in the frame (those to which you mount the lamp) so that there is a connection with the ground. It would be worth the lamp to add new mounting screws (screws from an old romeet spoil the effect, collectors know what I mean:), bulb and gasket for the counter. Often when ordering this is forgotten. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
Romet Kadet, the interrupter looks good at first glance, however, you need to work on it so that there are no problems with it. First of all, tighten the locking plate on the side and strike the rivet which holds the part isolated from the base in one place (in my case it worked on this rivet and caused short circuits). The second thing is to bend the spring from the toothbrush like the original so that it does not go into the holes, but falls into a certain place locking on them (U-bend where it enters the hole). Adjust the curvature of the anvil to the toothbrush by appropriate bending (in my case it went that oblique). And the last thing is to throw away those plastic insulating washers and buy thin ones made of rezotex or ebonite ) to match the height of these washers to the anvil.
Review translated automatically
Reliable opinion
Romet moped bell in chrome is a sturdy, easy-to-install accessory, perfectly matching the motorcycle. Its loud sound ensures safety on the road, attracting the attention of other traffic participants. Aesthetically, it looks great, adding elegance to the appearance of the moped. It is a practical and stylish item worth having, especially if you want to stand out on the road and emphasize the character of your vehicle. Its versatility makes it fit a variety of moped models, making it an even more valuable accessory. Highly recommended :)
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The interrupter has a German TUV certificate, this is always a guarantee of quality. After installation and ignition alignment, it works as Predom Romet factory ordered. During installation I had a problem with the pin on which the interrupter is seated (I detected a small play, meanwhile it should not be there, the pin should be mounted at a right angle of 90 degrees, a little tinkering threading and the problem eliminated). Romet Ogar 205, year of manufacture 1987.
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
This fits to Romet Motorynka m301 well. The length is a bit more than original, but no problem. I had two issues with this one: - the switch did not work. A connection problem. Had to remove the switch and do some solving. - The blue wires are not connected to the ground. For some reason the wires do not touch the connection bolt mounting. Need to fix that.
Review translated automatically
Reliable opinion
The lamp as described differs slightly from the original at least the one I had that the top of the lamp is straight and there is a slightly rounded. When tightening this rubber to the fender, I advise you not to exaggerate with force because it is quite flexible and later you have to work hard to fit the lampshade. If you do not exaggerate with the force of this rubber, everything fits perfectly.
Review translated automatically
Reliable opinion
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
Reliable opinion
I purchased a lamp for the legendary motorcycle m1 from the '80s, the lamp meets my expectations 100%, also perfectly matches the original bracket (installation very easy, took me only 10 minutes) The lamp is no different from the original. I recommend gmoto.pl you can buy here everything for your favorite motorcycle and more :)
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
Reliable opinion
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
I own an 89 ogar, this item 100% reflects the original, with the installation was not the slightest problem, the included instructions did a great job. The lamp in perfect condition was delivered in a very fast time. On Monday it was shipped, and on Tuesday it was already at my place.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
I am the owner of a 1986 Ogara 205, the product purchased from you - Romet front lamp is identical to my old damaged one. The quality of workmanship very good, and above all, it fits perfectly. Shipping promptly from Gmoto website, for this an additional plus. Regards
Review translated automatically
Reliable opinion
Romet Kadet 87. Fits in place of the original ignition base. No need to saw anything. Insulating washers- a failure, too small diameter of the hole and too high. Isolating washer at the point of contact of the anvil spring, badly mounted, placed by which can contact.
Review translated automatically
Reliable opinion
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
Reliable opinion
Ogar 200 88' The kit was purchased as a spare , no less I was hoping to receive a black cable and black pipe - arrived red cable and black pipe. This does not affect the operation of what, but I would prefer to receive everything in one color
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store there are many parts for motorcycles and mopeds Parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials
Review translated automatically
Reliable opinion
The cable looks ok, maybe a tad too thin. Unfortunately worse is the pipe. The quality is poor and it had no transition at all when checked with a meter. Maybe the spark would jump, but wouldn't it reflect on the strength of the spark. After trying to repair it, the pipe broke.
Review translated automatically
Reliable opinion
I have a motorcycle and the original lamp with a lampshade. When I bought it the lampshade was broken, so I ordered another one on gmoto although it is not original but it is. When it came unfortunately it didn't fit :( I redid the lamp a little and everything is fine.
Review translated automatically
Reliable opinion
romet ogar 205 1987 I bought without high expectations after all it is a lamp for an old motorcycle but it exceeded my expectations in every aspect perfect reflective surface perfect without bubbles simply brilliant I highly recommend !
Review translated automatically
Reliable opinion
This site has everything you need to assemble your favorite motorcycle. I personally after long years with sentiment I am restoring a Motorcycle :) rear lamp perfect ;) Shipping and quality of products and service perfect
Review translated automatically
Reliable opinion
Motorcycle 50 ccm 1986 year of production, the base of the ignition switch was quite "defeated". Years of use have done their part and it was necessary to transfer the electrical and ignition equipment to a new base .Now it is possible to smoothly regulate the ignition.
Review translated automatically
Reliable opinion
WSK 125 year prod 1980 KOS I am a satisfied customer,I am shopping for another time,I prefer contact with the seller and here is a very good service.I willingly and often browse the assortment of your store and I will certainly store more than once.
Review translated automatically
Reliable opinion
Romet Pony 50 1989 (Motorbike)- the lamp shines nicely, in my opinion, well made, does not break when tightened more firmly (which happened to me with a lamp bought at another site). Very good value for money. I recommend!
Review translated automatically
Reliable opinion