Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
WSK 125
Options +2 
Browse by manufacturer
Products reviews
WSK 125 B1 1971. Expensive, but it is unlikely to be worth playing around with constructing these grommets yourself.- a waste of time. Here we have a complete component ready for assembly. Isolating washers should have a "rim" that stabilizes them in the crankcase holes. I screw the first nut next to the aforementioned isolation washer without a metal washer - this ensures that it will not unscrew. It is a good idea to start the assembly by screwing the pins to the spark plug wires and then only in the crankcase (for high ignition).
Review translated automatically
Reliable opinion
The lamp company makes sure that the customer is satisfied. I believe that the tail lamp for my wska is made of good quality products, not like Chinese replacements.The lamp is made with great accuracy and care, retained the details of the originality with which I am very pleased. Sufficient length of cable which allows convenient and fast installation. I think I should enjoy its brilliance for many years.
Review translated automatically
Reliable opinion
Hello.Purchased CDI ignition with electrical installation is a very good choice for me and I am very satisfied with this purchase, very aesthetically made, easy to read, easy to distribute and install, you know what to do, very quickly installed I was already able to ride my WSK 125. Thank you very much for a very good product, I recommend and will recommend this product to everyone . Greetings
Review translated automatically
Reliable opinion
Wsk 125 78 and 81r. after 25 years I pulled them out of the barn and decided to restore them for the children.I was looking for a store where I can buy everything I need - and I found it.The parts look ok and the prices are not exorbitant.I sincerely recommend you have almost everything there - friendly service
Review translated automatically
Reliable opinion
WSK 125 1978. Great replacement for the original spark arrestor and is a great fit. Installation simple and without modifications. Fulfills its purpose, good charging and lights, no dimming at slow speed. Highly recommended !!!
Review translated automatically
Reliable opinion
WSK 125 B3 1983. Visually very good. Also chrome very aesthetically pleasing and durable. Matching to the original as well as currently manufactured optical element perfect.
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Mount made very carefully and accurately . Fits perfectly and very good galvanic coating makes this small item worth recommending!
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. The holes fit, the sheet metal fits, everything is fine. A little uneven surface, but the plate is not visible after installation anyway :)
Review translated automatically
Reliable opinion
Wsk 125, '85. The time has come to replace the spark in my fumka. Ignition cdi superbly packaged, fits, plays and buzzes;) it chatters from the middle of the kicker
Review translated automatically
Reliable opinion
Turn signals well made nice fit aesthetic look only bulbs need to buy 6v because they add with 12v bulbs
Review translated automatically
Reliable opinion
WSK 175 1986. When rebuilding my wski, the turn signals super fit and wonderfully convey a resemblance to the original.
Review translated automatically
Reliable opinion
Turn signals made aesthetically, beautifully presented, at this price I can recommend as much as possible.
Review translated automatically
Reliable opinion
Very good quality workmanship, fits my WSK 125 perfectly. The chrome on the frame is of very good quality.
Review translated automatically
Reliable opinion
Product very cool everything works and fits like a glove I personally am very satisfied I recommend it
Review translated automatically
Reliable opinion
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
Reliable opinion
In my WSK was the original 6v ignition, unfortunately, due to the crooked magnet wheel problems with the spark gap and the lack of availability of 6v bulbs in the stationary store, I decided to purchase a CDI on gmoto.After laying all the cables and setting the ignition with a dial sensor WSK fired up immediately the lights shine perfectly.To connect I have a stop light.I recommend ignition Good and at an affordable price.Regards.
Review translated automatically
Reliable opinion
WSK 125 here it's not quite as written it fits seamlessly and works from the first time, the magnet wheel did not sit on the cone ( the whole stator with coils was too high ) and before I knew it the electrical lead to one of the coils was damaged, I soldered, but only this week I will have a chance to check if everything works, for now the opinion as good product.
Review translated automatically
Reliable opinion
WSK 125 here it's not quite as written it fits seamlessly and works from the first time, the magnet wheel did not sit on the cone ( the whole stator with coils was too high ) and before I knew it the electrical lead to one of the coils was damaged, I soldered, but only this week I will have a chance to check if everything works, for now the opinion as good product.
Review translated automatically
Reliable opinion
Finally my Wsk began to ride better than at the factory, this maintenance-free ignition is simply the best possible solution, I recommend to everyone, the spark base fits perfectly and you can see that it is not some chinol. All components are made with great precision, and the engine works evenly better than from the factory in Swidnik. Kit tested in wskb3 125 Garbuska 1976r. I highly recommend
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Ignition good . But does not have instructions on how to adjust this ignition . Another disadvantage is the installation for this ignition do not match connectors instead of female and male was two female which made it impossible to connect the installation and there was a need to rework it . If not for this everything would have been perfect .
Review translated automatically
Reliable opinion
Big problems I had with this type of ignition. First of all, I am a layman and without any knowledge I managed to install it and start the motorcycle. Of course, contacting the store helped me a lot. Well invested money. The whole installation is hooked up to the battery and now after dark I can finally see something;)
Review translated automatically
Reliable opinion
SHL M11 - interrupter inserted for the previous one that had run out, size-wise this one is a little bigger. It gives the impression of being more solid than the one I had before. Installation without any problem due to the fact that the entire turn signal installation was done by me (there were no factory turn signals in SHLs).
Review translated automatically
Reliable opinion
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
Reliable opinion
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
Reliable opinion
High quality product, the engine runs beautifully and there is not the slightest problem with firing or holding revolutions, the lights shine strongly I recommend installing a battery so that the lights will not dim, the installation is trivial and no modifications are needed.
Review translated automatically
Reliable opinion
The CDI ignition that I ordered is a great product and gives you the opportunity to combine the old technology with the new one, after installing the ignition the spark is all the time there is no problem that somewhere on the platinum was lost. Simply a great product at a reasonable price
Review translated automatically
Reliable opinion
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
Reliable opinion
WSk 125 to the kit included diagram is not very clear is not given where to mount the voltage regulator, not using the original wires of extinguishing,charging,lights coming out of the vias to the lamp .
Review translated automatically
Reliable opinion
Great replacement for the original spark arrestor and is a great fit. Installation simple and no modifications. Fulfills its purpose, good charging and lights, no dimming at slow speed. Highly recommended !!!
Review translated automatically
Reliable opinion
WFM M06, high voltage cable transparent 50 cm, very good quality, flexible, because it is transparent you can see very well whether it is well screwed into the coil and into the pipe.
Review translated automatically
Reliable opinion
Replacement of a plug in a WSK 125 Gil, went without a problem, the key fits, and has the look of a key of the era and that was the point, to collect a set of keys similar to those of those years. I recommend
Review translated automatically
Reliable opinion
Sound signal made of good material wogule does not differ from the original. I recommend the product because it met my expectations and improved the aesthetic appearance of my ogar.
Review translated automatically
Reliable opinion
Wsk 175 M21w2 Interrupter works flawlessly.The previous one, which I bought complete with led bulbs, on the switched on engine gave a stroboscopic effect .
Review translated automatically
Reliable opinion
Everything as described, good quality products, I am satisfied I recommend to all who restore the splendor of their old timers:)
Review translated automatically
Reliable opinion
Directions look nice it is worth buying it is one but one nut is missing on each should be two is one
Review translated automatically
Reliable opinion
Wsk 125 humpback 1975.Strongly Chinese, even on the box there was a bar code cut out, for this price there is nothing to expect good.
Review translated automatically
Reliable opinion
product well made steel in galvanized fits without a problem after adding reflectors will look aesthetically pleasing on the motorcycle
Review translated automatically
Reliable opinion
Product as described very fast shipping good contact with seller nice service I recommend this seller !!!
Review translated automatically
Reliable opinion
I own a WSK 125 and 175.Perfect solution to the problems of switching to a new bulb. Quick and easy installation.
Review translated automatically
Reliable opinion