Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2021-11-16, 20:36
Wiesław
Motorcycle WSK 125 B3 year 1985 is under restoration. It buys most of the parts at Gmoto pl I am satisfied. Previously I renovated WSK 125 B1 also most of the parts I ordered from Gmoto pl. There were never any problems. I still have plans to renovate WSK kos and WSK Bąk and wfm The parts are of very good quality and always fit the bridge I have not yet installed but I watched it is solid.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-27, 18:09
Radosław
Romet Ogar 125 (vintage 2015). Admittedly, the lamp shade is from a different model, but I managed to fit and install it quite accurately, which allowed me to regain the joy of riding :) The failure, was that the previous lampshade was broken, so the installation consisted of drilling through the existing underside of the lamp to run two mounting screws through.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-24, 23:53
Adamsky73
WSK 125 B! 1971r. The second of the low budget coils I have installed and it works as expected. The first one has already traveled about 500km in extreme conditions, so this one will probably also serve well. The piece is done quite aesthetically - the dimensions match, but the wire could go from the bottom - away from the magneto.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-18, 16:39
Dominik
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-19, 17:01
Krzysztof
WSK of 1969, the so-called two-frame, fits shines, light bright good, installation simple everything fits. The same bulbs apply to SHL from 1966 and 1967. All of them so far serve their purpose
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 17:42
Krzysztof
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-19, 20:05
Krzysztof
Greetings. I applied the capacitor to a 1966 SHL 175 motorcycle. It fits, it works, so nothing more is needed for happiness ;) I recommend greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-06, 14:10
PAWEŁ
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-08, 18:35
BabisF
6V 2W light bulb. Bought them for my KE125. Fitted exactly as per description. Very good light and overall quality.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 10:55
Sebastian
I bought the battery for an electric Jeep for my son. It charges quickly and lasts a long time. Definitely recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-20, 15:07
Miłosz
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:20
Tomasz
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-17, 19:00
Konrad
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-22, 20:13
Mirosław
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-09, 16:36
Daniel
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-20, 11:05
Łukasz
I own a 1976 wsk 125 I had a selenium rectifier earlier unfortunately there were problems with charging the battery after installing this bridge charging is as it should be of course the bridge is easy to install the quality of workmanship very good cables and connectors solidly mounted everything nicely described I recommend to all who have charging problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-06, 16:45
Filip
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:17
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:19
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-04, 19:01
Daniel
SHL M11 - interrupter inserted for the previous one that had run out, size-wise this one is a little bigger. It gives the impression of being more solid than the one I had before. Installation without any problem due to the fact that the entire turn signal installation was done by me (there were no factory turn signals in SHLs).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-13, 14:40
Oliwier
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-22, 17:58
Patryk
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:14
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-28, 07:26
Lukasz
Unitra diode bridge meets all the expectations of the owner of wsk 125 model b3 and more. It is great as a replacement for the original selenium rectifier originally mobtowany. The simplicity of connecting to the installation causes that we can enjoy charging our village.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-19, 16:05
Marcin
WSK M06B3 80 r: The capacitor does its job - but before it did I had to ream one of the mounting holes a bit because they have too much spacing, and I had to bend the sheet metal to the other side because the cable is too short to mount it the way it is originally bent.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-26, 11:24
Andrzej
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-13, 19:06
Zita
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-25, 12:39
michał
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-11, 20:25
Jarosław
I bought for my motorcycle works flawlessly and at the same time looks nice. The pipe is held very well so that the motorcycle does not "lose" the spark, the light is also useful during malfunctions, because you can easily see what is broken plug or ignition.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-19, 10:48
Adam
Bridge bought for WSK 125 single lead connection as in the original that is the far right from the charging coil plus to the ignition the rest insulated I recommend to everyone because charging is improving umnie was 6.4v at low revs 6.9 v at higher revs
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-02, 19:39
Paweł
The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-17, 14:18
Jacek
An indispensable item in any motorcycle of the era. A very useful item to replace the traditional selenium rectifier. Easy to install for those who paid at least a little attention in physics classes. Made aesthetically though for the communist era. Recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-02-24, 10:07
Luichi's
Disappointed, the bulbs are the ones I ordered but the shipping is not cheap, instead of delivering it to the shipping address they left it at a collection point and I had to go personally to pick it up, I will not recommend Gmoto to any friend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-17, 09:48
Jan
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-05, 21:50
Miłosz
Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-15, 15:45
Wiesław
I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion















