Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
WSK 125
Options +2 
Browse by manufacturer
Products reviews
WSK B1 from 1969 Once again, I am installing an ignition interrupter in a WSK engine (how to restore old engines worn and sometimes stagnant for years is a common procedure) This interrupter is made of good quality materials. It is complete so there is no need to look for some additional insulating pads. In operation it also does not make problems - so far where I have mounted it runs without problems. Greetings and recommend. Krzysztof
Review translated automatically
Reliable opinion
I bought this reflector for myself for a 2007 Yamaha Drag Star 650. I had a similar one before on my Intruder, so I decided to glue it here as well, not only for safety but also for beauty. I glued it on the rear of the passenger backrest. Made really precisely with convenient self-adhesive tape. The whole job two minutes, looks great, as if it was always there! Greetings Maciek
Review translated automatically
Reliable opinion
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. This cover is nice because it is made of solid material, it was quite difficult for me to doggone hooks and a little to profile to the shape of the age-old lamp, but this is normal if it combines old after the transitions with new. In the end it fits and sometimes it rains, blows, dusts and the ignition is well shielded and still works. I recommend
Review translated automatically
Reliable opinion
Welcome to the heart. WSK B1 from 1969 I have already had various platinums and I must say that these are the best. They fit well, the holes fit, and what is important, both parts fit well, a good hammer contact to the platynki, because even with this sometimes varies, no punctures, good quality material, so a little engine on it. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
The front lamp insert from Wesem, it looks very nice, there is nothing to complain about as far as the insert is concerned, while as for the tail lamp, it is aesthetically made, but there is no possibility of connecting a stop light, and it is a pity that there is no reflector as in the original, only a piece of sheet metal. Awiny bulbs without approval.
Review translated automatically
Reliable opinion
WSK 1969 year b1, so called two frame. The glass fits super well. I had concerns about whether it would sometimes sweep too much space in my lamp (I've had that happen before) but it's all as it should be. It works nicely, gives good light, bulb mounting also without problems. The look is also reminiscent of products from that era. I recommend and greetings
Review translated automatically
Reliable opinion
hello front lamp insert as well as the frame fit very well but the rear lamp is some kind of Chinese thing the spacing of the screws does not match and in general far from the original on the photo no1 original on the right rear lamp from g-moto.ps please take care of the details and relying on the originals we are restoring old motorcycles not Chinese vacuum cleaners :)
Review translated automatically
Reliable opinion
WSK M06 B1 1970. Coating very good and so many pluses. Requires a lot of work to fit the serrations to the holes in the lamp. In addition, the thickness of the sheet metal makes it difficult. Also, do not overdo it with the thickness of the rubber under the cover, because you will not have enough serrations to fix it.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. The front lamp insert of very good quality, perfectly matched. As for the tail lamp, its workmanship is also very good. The only thing to complain about is the lack of possibility to connect the stop.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
WSK 125 B3 1983. Visually very good. Also chrome very aesthetically pleasing and durable. Matching to the original as well as currently manufactured optical element perfect.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969.The lampshade is well made, looks like products of the era, solid, welded and looks good. Greetings and recommend.
Review translated automatically
Reliable opinion
Without a file will not do. massacre, platens, ignition coil as well as capacitor all need correction. Send these Chinese a caliper
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Yamasaki YM50-8 4T year 2010 installation of reflectors went very quickly not a whole minute it is difficult to get such reflectors with M6 thread.
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
Turn signals well made nice fit aesthetic look only bulbs need to buy 6v because they add with 12v bulbs
Review translated automatically
Reliable opinion
WSK 175 1986. When rebuilding my wski, the turn signals super fit and wonderfully convey a resemblance to the original.
Review translated automatically
Reliable opinion
Turn signals made aesthetically, beautifully presented, at this price I can recommend as much as possible.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
Very good quality workmanship, fits my WSK 125 perfectly. The chrome on the frame is of very good quality.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
I do not recommend wole buy used. In the picture the black plastic is rubber. Lamp for one bulb. Trash.
Review translated automatically
Reliable opinion
I have purchased an ignition cover for my Wska 125 M06 B3 and so briefly and to the point: - visually it looks very good, although the quality of the plastic slider could be better while the chrome is first class - fit the cover with the holes in the lamp after a small correction with pliers, and here it should be noted that the overlapping of the plates requires more strength and technique because it is a hard material, but it is better to take a little trouble than to complain that it is plasticine.isn't it? - I like the aesthetics, there are no unnecessary parts of the casting and for the money I think it is worth buying. Regards K.
Review translated automatically
Reliable opinion
The product used on the 1963 SHL 175.The first thing I noticed was the clever undercutting of the top hump at the gasket.At the time of rubbing the lampshade,as well as the fender,in the original,it got in the way a bit.Bravo.But not so straight to the sky.You would think that the crisis forces as little material as possible,but no,the communist lampshade is. thicker !!! So also .more durable.In the intention of the manufacturer thinner lampshade will result in faster replacement.Personally for this I give a minus.
Review translated automatically
Reliable opinion
At first glance, they seem solidly made. Unfortunately, it's worse with the fit. Minor corrections to the anvil mounting hole on the magnet and the axis of rotation of the hammer - it is difficult to say the fault of the interrupter or magnet. Insulating spacers larger than the intended hole for them by 0.5 mm, and this is worth correcting because it is a waste of time to fit these elements.Greetings and I hope that finally some opinion with comments will be accepted by you.
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
The ignition interrupter is not matched to the wsk 125 motorcycle and is not suitable for installation on the previously mentioned motorcycle. The tip of the hammer that should move on the shaft cam does not contact it at all, which gives the effect of a non-stop closed interrupter. The washers included in the set are too small and also do not fit.
Review translated automatically
Reliable opinion
Good day I have a WSK 125 and a Cross 125 to WSK platens and capacitor. How much ze 5 minutes I put on without dogging without combining it fit as it should be the same in the cross and the line well fitted and on + with the adjustment you can set yourself on the line than in the carburetor turn in then adjust the carburetor and none of this will happen. Until you adjust the carburetor.
Review translated automatically
Reliable opinion
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
Reliable opinion
Junak M16 - the cartridge fits almost perfectly; the quality is incomparably better than the original from Rice (all Chinese plastic, frosted-milk glass - causing blinding light scattering of the bulb). Aside from the mismatched spring attaching the bulb holder, the effect of replacing the headlight insert is worth any money. Recommended.
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
Reliable opinion
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
I own a wsk m06 64, all the parts from the order fit without modification and are as described. As for the appearance, they also do not differ from the factory-installed parts. Very cool that in 2020 you can buy parts for a 1967 motorcycle that are of good quality.
Review translated automatically
Reliable opinion