Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine bearings and seals
WSK 125
Browse by manufacturer
Products reviews
Hello, bearings, simery CX WSK 125 - 5 years ago put on a tricycle works to this day very well. Quiet (they do not hum do not creak) No perceptible play on the shaft. The fit was very good both to the crankcases and to the crankshaft and gearbox, a slight heating with a torch and it went in elegantly. Aesthetics of workmanship very good. Simering seals very well both the oil in the gearbox and the air on the ignition side. The time came to assemble another WSK 125 engine and without a second thought I purchased (Set of CX bearing simulers WSK 125) I recommend this product.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969 I was replacing the seals in the engine, which has its years and its wear of material, I bought in the store an oring of the same dimensions and it did not do its job as it was leaking so it was leaking so I ordered and put on the above product and the problem with oil leakage stopped (seemingly the same and not the same). I recommend and greetings.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969.Together with the replacement of the o-ring of the shift shaft I did the replacement of the starter shaft seal. The product of good quality, the replacement went correctly and smoothly and, most importantly, there is no oil leakage. I recommend and greetings.
Review translated automatically
Reliable opinion
Java 350 Everything ok Very well assembled product, very good quality. Delivery time at a high level. I recommend Gmoto
Review translated automatically
Reliable opinion
Oring wykorzysatnay in WSK 125, made of very good material, very good size, product as described.
Review translated automatically
Reliable opinion
The o-ring is made of good quality material, matches the description in the ad, and is at a very good price.
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
My machines WSK M06B3 72r , Jawa 350 TS,Minsk 400, I have been sourcing parts from GMOTO for some time, I recommend because of the sufficient description of products, conformity of parts with the description, fast shipping, great contact. I am passionate about extinct motorcycles (demoluds to be precise), so I require a lot from the goods and here I find it,without unnecessary fuss.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
I bought bearings for wsk WSK M06B3 GIL bearings fit perfectly everywhere as in the original only minus is that in the picture are blue simerigni And I got black but it's a small detail but anyway I can recommend you do not need to add everything separately just choose this set and everything is there
Review translated automatically
Reliable opinion
I highly recommend these bearings. As you know SKF has always been a top brand and here it is confirmed. The workmanship is aesthetically pleasing, they do not jam or anything like that as in the competition already at the start. Dimensionally very well. After installation, the tailstock cycles like a dream. I recommend
Review translated automatically
Reliable opinion
Oring made of very good material.The fit of the dimensions perfect , so there was not the slightest problem with the assembly of the entire subassembly.Definitely recommend to all those planning an overhaul, because at a small cost you will get rid of the problem of leakage.
Review translated automatically
Reliable opinion
My vehicle is a Romet Pony motorcycle. I am currently overhauling my moto. The bearing on the shaft already placed. Everything is running and spinning nicely. The bearing was well lubricated by which brought good results. I personally think it was a good purchase. I recommend.
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Simmering of the gearshaft for a WSK 125 motorcycle enters with slight resistance, it does not leak. The only unpleasant surprise was a spring popping out of the groove in it, fortunately I noticed it in time and pulled it out of the engine.
Review translated automatically
Reliable opinion
I bought bearings for derbi sendy 50 bearings are very strong and durable I have already ridden 500 km and they perform very well.Thanks also to gmoto company for being and helping us motorcyclists to provide parts and create a common bond
Review translated automatically
Reliable opinion
Unfortunately, an unpleasant surprise during installation. the bushing did not fit in the connecting rod, while through the hole in the middle of it to put the pin. The outer dimension was larger than the hole in the connecting rod (original) by 0.9mm, while inside by 0.5mm
Review translated automatically
Reliable opinion
Komar 2351, 1976. The bearing is good, it enters nicely in the crankcases, but it is hard to enter the shaft despite the fact that it was heated, however, this is not a problem. As for the quality, it works very nicely and the quality/price ratio is bdb.
Review translated automatically
Reliable opinion
komar sport 2361 engine s38- undersized simmerers - did not want to fit into the sockets in the crankcase, broken when trying to install - they had too large outside diameter (I bought others and with the installation there was no problem)
Review translated automatically
Reliable opinion
The o-ring was purchased for my WSK'i 125, because it needed a minor repair, as it was losing some oil, the fitting and installation went well, nothing had to be combined or replaced, I recommend
Review translated automatically
Reliable opinion
The o-ring was purchased for my WSK'i, because it needed a minor repair, as it was losing some oil, the fitting and installation went well, nothing had to be combined or replaced, I recommend
Review translated automatically
Reliable opinion
WSK 125 ccm, M06B-3, 77r. aesthetically made and packaged in the company bag, the spring does not pop out, fits well and more importantly nothing leaks, I recommend greetings from Swidnik area
Review translated automatically
Reliable opinion
MZ ETZ 250 - simmering 25x35x7 of the gearshaft . He went in place of the original fit , the difference (other than the wear of the original) I did not notice. Oil stopped leaking.
Review translated automatically
Reliable opinion
The bearings fit perfectly, the wheel axle goes into the bearings, although when dismantling it is necessary to use a drift, but it is not a problem.
Review translated automatically
Reliable opinion
Jawa 50 type 20.Order processing exemplary, speed also. Products in good quality. SKF, it is known, is the top shelf bearings
Review translated automatically
Reliable opinion
I ordered according to me a set of two bearings and received one I don't know if I misunderstood the offer but a set for a wheel is two bearings.
Review translated automatically
Reliable opinion
Bearing as this bearing, quality ok, and at this price in particular worth buying. For older motorcycles completely sufficient.
Review translated automatically
Reliable opinion
Product as described, good quality. The package came as usual quickly and without any complications. I recommend this store.
Review translated automatically
Reliable opinion
Bearings like bearings of Polish production product of good quality for the needs of WSK motorcycles, etc. completely sufficient.
Review translated automatically
Reliable opinion
Bearings perfectly match the restored wheels. Dimensions are the same as in the original. I recommend for this price is worth.
Review translated automatically
Reliable opinion
WSK 125 M 06 B 3. Goods as described. Fits perfectly, perfect replacement. I recommend one hundred percent.
Review translated automatically
Reliable opinion
Solid bearing. Fitted to SHL M11 engine S32. Everything fit.
Review translated automatically
Reliable opinion
MZ ETZ 150 - The product is as described. Highly recommended.
Review translated automatically
Reliable opinion
bearing well made, fits perfectly recommend
Review translated automatically
Reliable opinion