Forgot password
Order status
Free delivery from 150 euro
Motorcycle fuel system - parts
WFM M06 125
Browse by manufacturer
Products reviews
Greetings. I have a 1969 WSK B1. I purchased a carburetor repair kit because I lost the adjusting screw while adjusting and then during a test drive. I installed the old one unscrewed from the damaged carburetor, but it, too, had already been corrected by the former owner and did not fulfill its purpose. After installing the new one from this set, all problems with adjustment stopped. The product fits and works well with old carburetors of the era. I recommend and greetings.
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 1969.The carburetor fits well with the rest of the motorcycle so there was no problem with the installation as well. The cable fits well. Tight carburetor can be adjusted well, set the right dose of fuel and air. The appearance is also good resembles a carburetor from the era and what is important is that the parts from the old one from the era fit the new one so you can do a bit of fiddling. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969 The faucet fits and I must say that it is made solidly and also looks quite well slightly imitates the style of bygone times. When you unscrew the cap the thread fits superbly to the tank. One thing that I modified is this longer tube I shortened because in my opinion it reaches too high. Regards and field. Krzysztof
Review translated automatically
Reliable opinion
WSK from 1969, the so-called two-frame. The carburetor, first of all, matches the rest of the parts from the era, goes well with the rest of the engine, can be adjusted well, listens to me ;) it is also a solidly made carburetor does not leak and you need really great skills to break it down. I recommend it
Review translated automatically
Reliable opinion
Hi. The purchased carburetor arrived the other day after ordering. The motorcycle ignited from the first shot. The quality of the carburetor looks very good. It does not leak, the engine holds revs without adjustment. I recommend. All the best in New York. Regards.
Review translated automatically
Reliable opinion
The float looks decent, but the needle is too short for the G20M carburetor. Float sinker, does not allow the needle to reach the end. (It is possible that only I got such a copy). I compared it with several floats and it is definitely shorter.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine The faucet does not differ from the original in quality and appearance as well as the price is very much on the plus side,I have not yet put on but it has no right not to work and I have confidence in the store because I have never yet been disappointed.
Review translated automatically
Reliable opinion
Romet kadet from 1986, the faucet as well as many other parts that I ordered on gmoto are of good quality, I recommend. The store takes an active part in the restoration of my moped, this was certainly not the last of the purchases.
Review translated automatically
Reliable opinion
Carburetor very good quality, consistent with the original and most importantly the engine runs evenly on it. A good alternative to the original carburetors with which there is a problem even after regeneration.
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
Motorcycle M1rok 1980 , faucet fits like the old original a little sealing on the thread and all ok it is difficult to distinguish from the original and this is for most customers important
Review translated automatically
Reliable opinion
Warm greetings. Junak M10 from 1965. the gasket fit the faucet well, thickness good, after installation does not leak, works properly. I recommend and greetings.
Review translated automatically
Reliable opinion
WSK of 1969 B1, the so-called two-frame. It is a product made of good material, fit, when assembled it works well together, looks good. I recommend
Review translated automatically
Reliable opinion
After putting it on and trying to screw it on, the clamp baked, the fit is good the appearance is also good, but the materials used here are not suitable for anything.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969.The gasket is thick I could barely close the faucet but yes also it must be tight and tight. Greetings and recommend. Krzysztof
Review translated automatically
Reliable opinion
WSK 125 B3 1972 carburetor perfectly reproduced compared to the original no casting errors motorcycle runs evenly and revs up
Review translated automatically
Reliable opinion
WSK 175 S2 SPORT Gasket made of very good quality material reflecting perfectly the original fits in the faucet like a glove highly recommend
Review translated automatically
Reliable opinion
Wsk m06-z2. The rubber used to make the faucet gasket is not resistant to fuel. It swelled and flew apart after just a few minutes.
Review translated automatically
Reliable opinion
Unfortunately, the quality of the rubber from which the gasket was made fatal. In fact, it is unusable after literally several uses of the faucet.
Review translated automatically
Reliable opinion
I had no problem putting on the faucet quickly went smoothly. For its price recommendable. I recommend
Review translated automatically
Reliable opinion
Romet komar 80 r faucet very good with installation was not the slightest problem fits like ooriginal:) super
Review translated automatically
Reliable opinion
Faucet great, nothing leaks, everything functions nicely - reserve option works, easy installation recommend
Review translated automatically
Reliable opinion
The heater works without the board ,good speed control but the workmanship and material quality could be better.
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
Metal fuel faucet with filter and hose is a reliable item for owners of Romet, WSK and WFM motorcycles. Thanks to its robust construction, it provides durability and resistance to operating conditions. The filter effectively protects the engine from contaminants, which translates into long-lasting performance. Installation is simple, and the fit to the listed motorcycle models is perfect. It is not only practical, but also an aesthetic solution that improves the appearance of the vehicle.
Review translated automatically
Reliable opinion
I needed the present gasket for the faucet mounted in the tank of a small soiler. I could not find it anywhere. Only on your site, in addition to a photo of the gasket and information that it fits a Junak, its dimension was given - a diameter of 17 mm. This decided me to make the purchase. The gasket fits and is OK. A small thing but very happy. It is often the case that you buy things that you need to adapt for your own needs, and then such information is essential.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
Finally a new faucet and the problem with leaking fuel disappears. Super quality. Additional filter and fuel line allow for a comprehensive overhaul of the "bus" that feeds the fuel system. Every part purchased from this store impresses with the quality of workmanship, nothing smacks of cheapness. Everything looks decent and solid. Thanks to the relatively optimal prices, you can even resuscitate the old Komar at a low cost.
Review translated automatically
Reliable opinion
WSK 125 carburetor + cone filter. I could not come to terms with adjusting the old carburetor. The plug was still black. The motorcycle was very " smoky ". After putting the new carburetor on and firing it up, I was finally able to adjust the mixture composition. Nothing tastes like coffee with milk or rather the sight of such a color on the candle after it was removed from the cylinder - finally. I recommend this purchase.
Review translated automatically
Reliable opinion
Hello everyone I own a 50cc motorcycle I recently had a major overhaul of the engine and fuel system. On the gmoto website ordered a fuel faucet along with a filter and hose. The whole kit is very well described and fits perfectly to this model of motorynka. In good conscience I recommend this product, I am very satisfied with it.
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
I bought parts to restore my WFM 125 1956 - unfortunately originally there was a G16 carburetor but I could not get one I bought a G20 and that meant that I had to make an adapter to fit the carburetor to the cylinder . Everything worked out the engine smokes . Express delivery , contact super . I recommend
Review translated automatically
Reliable opinion
Romet Ogar 200 assembly mileage without any complaints I unscrewed the old one I screwed on the new one no shortcomings no corrections I had to do to the thread everything perfect no contraindications I poured fuel the faucet did not leak everything tightly I took the product out of the carton I mounted it to the motorcycle and you can ride I highly recommend
Review translated automatically
Reliable opinion
Probably one of the better rubbers I have tested. It withstands frequent disassembly of carburetors, perfectly matched diameters for easy installation. I use narrow tin bands or wire ties for it, and the rubber withstands it. Fuel is not terrible to it, after a considerable time of use it behaves like new. I recommend.
Review translated automatically
Reliable opinion
The faucet, despite its price meets my expectations. There was a small problem because I had previously purchased one piece, but it was delivered with a damaged thread from the separator. Because the store cares about the customer was sent a new one, which is tight, does not leak and the thread fits without any problems. recommend.
Review translated automatically
Reliable opinion
The carburetor looks good, neat but you can see that it is not the same quality as the original. There are lint in many places that have to be removed by hand. To install the line you need to remove the firing pin and this is an art. The firing pin mounting plate was poorly made, thin and bends. We will see how it will perform.
Review translated automatically
Reliable opinion
In Gmoto store you can find really a lot of parts for motorcycles.And the cost of goods is in very decent prices for every pocket.Product delivered the next day after ordering and parts compatible and matching to my wsk 125 1976. This is certainly not my last purchase in this store . I recommend!
Review translated automatically
Reliable opinion
Hello, I own a SHL Gazelle motorcycle with a capacity of 175 ccm. The fuel faucet gasket I purchased fits well and has an aesthetic appearance. About the material from which it is made I can not say too much because it was recently put on. So far it is fulfilling its purpose. Regards.
Review translated automatically
Reliable opinion
The fuel filter was not necessary for me. It takes up a lot of space and significantly extends the fuel line, which in itself I feel is a little too soft. The quality of the faucet seems ok. I bought this product due to the fact that it was cheaper for me to buy a set than to buy the faucet and line separately.
Review translated automatically
Reliable opinion