Forgot password
Order status
Free delivery from 150 euro
Motorcycle ignition system
WSK 125
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
WSK B1 from 1969 Once again, I am installing an ignition interrupter in a WSK engine (how to restore old engines worn and sometimes stagnant for years is a common procedure) This interrupter is made of good quality materials. It is complete so there is no need to look for some additional insulating pads. In operation it also does not make problems - so far where I have mounted it runs without problems. Greetings and recommend. Krzysztof
Review translated automatically
Reliable opinion
Welcome to the heart. WSK B1 from 1969 I have already had various platinums and I must say that these are the best. They fit well, the holes fit, and what is important, both parts fit well, a good hammer contact to the platynki, because even with this sometimes varies, no punctures, good quality material, so a little engine on it. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
WSK 125 B! 1971r. The second of the low budget coils I have installed and it works as expected. The first one has already traveled about 500km in extreme conditions, so this one will probably also serve well. The piece is done quite aesthetically - the dimensions match, but the wire could go from the bottom - away from the magneto.
Review translated automatically
Reliable opinion
Greetings. I applied the capacitor to a 1966 SHL 175 motorcycle. It fits, it works, so nothing more is needed for happiness ;) I recommend greetings.
Review translated automatically
Reliable opinion
Without a file will not do. massacre, platens, ignition coil as well as capacitor all need correction. Send these Chinese a caliper
Review translated automatically
Reliable opinion
Wsk 125, The base has a few differences from the original which can make it a little difficult to install. The holes for screwing the base to the crankcase are not perfected - you need to correct them yourself. The place for the interrupter is rolled up in the place of the screw, which prevents its spontaneous displacement - when you tighten it, the base of the interrupter starts to protrude on the locating pin. The place for the adjustment screw of the interrupter itself is badly made - it is not round, but triangular (the screw changing the opening of the interrupter).
Review translated automatically
Reliable opinion
At first glance, they seem solidly made. Unfortunately, it's worse with the fit. Minor corrections to the anvil mounting hole on the magnet and the axis of rotation of the hammer - it is difficult to say the fault of the interrupter or magnet. Insulating spacers larger than the intended hole for them by 0.5 mm, and this is worth correcting because it is a waste of time to fit these elements.Greetings and I hope that finally some opinion with comments will be accepted by you.
Review translated automatically
Reliable opinion
The ignition interrupter is not matched to the wsk 125 motorcycle and is not suitable for installation on the previously mentioned motorcycle. The tip of the hammer that should move on the shaft cam does not contact it at all, which gives the effect of a non-stop closed interrupter. The washers included in the set are too small and also do not fit.
Review translated automatically
Reliable opinion
Good day I have a WSK 125 and a Cross 125 to WSK platens and capacitor. How much ze 5 minutes I put on without dogging without combining it fit as it should be the same in the cross and the line well fitted and on + with the adjustment you can set yourself on the line than in the carburetor turn in then adjust the carburetor and none of this will happen. Until you adjust the carburetor.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
I own a wsk m06 64, all the parts from the order fit without modification and are as described. As for the appearance, they also do not differ from the factory-installed parts. Very cool that in 2020 you can buy parts for a 1967 motorcycle that are of good quality.
Review translated automatically
Reliable opinion
WSK M06B3 80 r: The capacitor does its job - but before it did I had to ream one of the mounting holes a bit because they have too much spacing, and I had to bend the sheet metal to the other side because the cable is too short to mount it the way it is originally bent.
Review translated automatically
Reliable opinion
WSK 125 B1 1970, made as a "vintage" - With battery, but with minor modifications. Capacitor without comments. In platinums required refinement of the hole for the pivot axis and filing of the hole for insulating washers for attaching the wires. 20 min of work with conifers.
Review translated automatically
Reliable opinion
I recommend this product, it works as it should, robito what it was designed for. Perfectly reproduces the originals, sometimes with the fit is a little problem, but, after all, state motorcycles are not perfect, they are worn out, so a little locksmith, a file in hand and plays like this doll;)
Review translated automatically
Reliable opinion
WSK M06B1 r.1968 I bought this kit because I didn't have a spark in my wska and I wanted to put everything on simply new.After putting everything on and setting it up, the motorcycle runs like new,the spark is solid and I'm sure I have peace of mind with it for a long time.
Review translated automatically
Reliable opinion
I purchased parts for my WFM 125 M06 from 1954 first models engine . I had concerns about whether I would get parts suitable for this model but the product I purchased fit . Express shipping , I received the parts on the second day . I recommend
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
WFM M06, ignition capacitor installed, works fine, a little too short a wire and I had to extend it but as written it is a capacitor for WSK 125 and not for WFM where there is more distance to the interrupter.
Review translated automatically
Reliable opinion
The capacitor mounting bracket is a mirror image of the original so I had to bend it the other way. the platens were very tight on the bracket. other than that, the engine started and is ok.
Review translated automatically
Reliable opinion
The coil after installation immediately works properly and impeccably, satisfaction with the quality very high. It fits perfectly in the base of the spark gap and there is no reason to worry about good current.
Review translated automatically
Reliable opinion
WSK 125 m06 b3 I put a new coil and capacitor and no spark. fits well looks average but so what because it doesn't work, maybe it was me who had a defective copy but I don't recommend it
Review translated automatically
Reliable opinion
Very good workmanship, lack of any defects the whole set perfectly spoils , professional attitude to the customer and delivery time, I recommend everyone to buy on g.moto
Review translated automatically
Reliable opinion
Very good workmanship, lack of any defects the whole set perfectly spoils , professional attitude to the customer and delivery time, I recommend everyone to buy on g.moto
Review translated automatically
Reliable opinion
Very good workmanship, lack of any defects the whole set perfectly spoils , professional attitude to the customer and delivery time, I recommend everyone to buy on g.moto
Review translated automatically
Reliable opinion
I own a shl m11 r.1965.The coil works properly.Unfortunately I had to grind it up a bit because it rubs against the magnet wheel.It has no effect on the operation.
Review translated automatically
Reliable opinion
Wsk 125 , such a small thing , and such a great impact on ignition. After replacement , zero problem with firing even after a long stop . Fits perfectly the pattern of the original
Review translated automatically
Reliable opinion
Looks ok, mounting plate thin, a little too wide and bends easily. Quality to the eye not the best, but it fits and hopefully will work.
Review translated automatically
Reliable opinion
WFM M06, WSK 125 ignition coil but for WFM it fits perfectly under the magneto wheel ,nothing rubs, spark good, engine smokes from one kick.
Review translated automatically
Reliable opinion
The product fits the SHL M11 175, and there were no problems with installation. Compared to the original from the communist era a little smaller winding.
Review translated automatically
Reliable opinion
WSK 125 of 1963, the part although recommended as suitable for this type of vehicle did not fit, too short wire to connect.
Review translated automatically
Reliable opinion
Wsk 125 Capacitor looks good and dealally fits whether it will be durable remains to be seen. But looking at the quality it is unlikely to be bad.
Review translated automatically
Reliable opinion
WSK 125 Kos. Platinums and capacitor gave new life to my WSK. Products fit well, consistent with the original. Highly recommend.
Review translated automatically
Reliable opinion
i own wsk 125 1980 year. product as described very good quality I recommend very fast shipping everything concretely packed
Review translated automatically
Reliable opinion
On my WSK 125 79r motorcycle, I reamed the mounting holes of the platens slightly (maybe it's an advantage such an individual fit)
Review translated automatically
Reliable opinion
I checked with a capacitor tester and found the capacitors to be good. They fit well in my Puch motorcycles.
Review translated automatically
Reliable opinion
WSK 125 1980. Good quality product, as described. Express shipping. Package at my place in less than 24 hours.I recommend.
Review translated automatically
Reliable opinion