Motorcycle parts
Honda CBR 125 - Page 5

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-09-26, 10:01

View original

Jacek

I have a 2003 Honda XR 125 L. I am replacing the clutch for the second time (after 10,000km) with hard off-road and city riding. Metal discs passed the test that's why I buy them for the second time. Installation without a problem, but remember the specialized keys for your motorcycle, and the clutch cover gasket.

Review translated automatically

Reliable opinion

2025-09-22, 15:11

View original

Jordi

Honda Cb500 PC26 - 1994 Includes the parts needed to repair the front brake master cylinder. These are not the original Honda parts, but they are good quality and fit the brake pump perfectly.

Review translated automatically

Reliable opinion

2019-07-16, 20:34

View original

Bartłomiej

Hyosung gv125 Aquila year 2007 Candles replaced without any problem. Quality and appearance as it should be-motor Fires at once . Recommended product.

Review translated automatically

Reliable opinion

2024-09-20, 12:07

View original

Aurélien

Purchased to completely rebuild my Nissin 11mm master cylinder. The kit fits perfectly. My master cylinder is back for life.

Review translated automatically

Reliable opinion

2021-02-22, 09:26

View original

Arkadiusz

Yamaha FJR 1300, vintage 2003. the CR8R spark plug is dedicated by the service center to fjr 1300.

Review translated automatically

Reliable opinion

2024-10-02, 06:12

View original

Bogdan

Hello Iridium spark plugs are currently the most technologically advanced type of spark plugs. They have center electrode tips made of iridium, a highly durable precious metal from the platinum group. The use of the precious metal made it possible to use a thinner center electrode - even 0.4 mm, NGK iridium spark plugs I use in my motorcycles improve the culture of the engine works more smoothly and dynamically very long life. I heartily recommend.

Review translated automatically

Reliable opinion

2022-09-28, 18:40

View original

Stanisław

Honda NTV 650 Revere 97r. Kit well made, good quality parts, easy installation good fit. Replaces the original parts well, the pump works flawlessly. I would like to add that the kit was purchased on the recommendation of a Honda service employee because the original repair kit costs almost 4 times as much, and this one does its job 100%. I sincerely recommend.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2025-08-03, 20:59

View original

Aksel

Have used these gaskets for the valve cover screws and they do exactly what they are supposed to. They seal tight, keep oil in and seem like a definite improvement over worn original gaskets. Installation was easy and the material feels both resilient and durable. No signs of oil sweat after installation - completely satisfied!

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2025-09-07, 11:02

View original

patrick

Sorry I don't have the photo but I fitted it to my MP3 400 scooter and it idles better, my engine runs much better and I'm waiting to see what happens to my fuel consumption but in any case I recommend the product.

Review translated automatically

Reliable opinion

2021-08-24, 09:31

View original

Sebastian

Sealers bought for Junak 123 (2015). The size identical appears on the original ones I changed. They fit perfectly and do their job (driven 1 kkm after replacement; I poured 150 ml of 10W lag oil into each lag).

Review translated automatically

Reliable opinion

2020-10-06, 06:56

View original

Mateusz

The gasket of very good quality fits my model perfectly. part of the exhaust no longer comes out sideways so that the sound of the exhaust system work and the correctness of operation is very good. Thank you and recommend

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2024-05-05, 19:42

View original

Jacek

I've been through various spark plugs, including the more expensive iridium ones, but I think the best ones for touring are the basic NGK CR8E ones. I recommend and hope that the product will stay with us for years :).

Review translated automatically

Reliable opinion

2018-11-23, 07:39

View original

Łukasz

The biggest minus for the shipping time. Zero information about the extension of the shipping time due to the lack of product ( one was for the other they waited for delivery)and I waited 5 days for the package by courier. Product ok.

Review translated automatically

Reliable opinion

2025-04-30, 07:14

View original

Hajek68

The goods arrived safely. Just originally packed and in order. Exactly matches the specification for my bike. I am very satisfied. Unfortunately I don't have photos, the plugs are already fitted.

Review translated automatically

Reliable opinion

2025-03-12, 05:08

View original

Lukáš

After rebuilding my engine (honda cbr 125r j39) I replaced the original gasket with this one, and so far great satisfaction. Everything is as it should be, and I have to appreciate the safe packaging.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2024-05-17, 08:03

View original

Łukasz

Regulator worth the price, one of the best companies that makes reliable components for motorcycles. I am very satisfied. I will feel safe on the road

Review translated automatically

Reliable opinion

2025-07-16, 06:39

View original

Alexander

Easy to order, fast delivery. Fits exactly. I fitted the oil seals straight away and passed the TÜV. Would buy them from G-Moto again next time.

Review translated automatically

Reliable opinion

2020-05-13, 06:44

View original

Damian

Honda VTX 1300 2006. The master cylinder was reconditioned with the kit purchased. Fast, efficient. High quality goods. The pump works like new.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2023-08-21, 07:01

View original

Emilia

As usual, excellent quality from this manufacturer. Buying this product I was not disappointed, you can always be sure of high consistent quality.

Review translated automatically

Reliable opinion

2017-07-07, 10:12

View original

Slabdoor

Zumico GR500 It's a pity that in the picture there are still dust seals but otherwise ok After all, for such a price they must meet my requirements

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion

2024-07-27, 05:08

View original

Bartezz

It fits the Honda CB600F Hornet PC36 perfectly. Charge does not jump, holds the book 13.8 - 14.2 volts depending on the receivers on.

Review translated automatically

Reliable opinion

2024-09-23, 07:32

View original

Thibault

Good product, well fitted, only delivered in sets of four when there were three on disassembly, so the doubt lingered for several minutes.

Review translated automatically

Reliable opinion

2017-04-04, 23:05

View original

Piotr

Honda transalp 600v,1995. Universal kit , well fitted , works flawlessly. Quality of materials at a high level. I recommend .

Review translated automatically

Reliable opinion

2020-05-12, 08:21

View original

Bartek

Honda Varadero 125 2001r fitting and installation seamless. The gasket does its job, no blowouts on the exhaust manifold.

Review translated automatically

Reliable opinion

2018-07-10, 09:55

View original

Maciej

Akurat mi got an item with a hidden defect invisible and while screwing it in with a torque wrench, the thread from it broke in the head.

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2025-09-06, 16:13

View original

Miroslav

I still don't see a difference in performance between the classic and this iridium candle, not much for the high price. next time I'll go for a normal candle.

Review translated automatically

Reliable opinion

2019-07-06, 07:42

View original

Marcin

NGK is a company that produces spark plugs for many brands in the automotive industry, and I can fully recommend this spark plug.

Review translated automatically

Reliable opinion

2025-01-15, 05:37

View original

Ondrej

Bearings to the shock absorbers beautifully for the fit it works and the shock absorbers move beautifully fit there without any no its a problem for me good

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2019-01-20, 21:50

View original

Adrian

Honda cbr 125 2004. gasket made of a soft sheet metal. Well cut holes. As for the quality of the product, I have no reservations.

Review translated automatically

Reliable opinion