Motorcycle parts
Honda CBR 125 - Page 5

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-09-26, 09:52

View original

Jacek

I have a 2003 Honda XR 125 L. I was replacing the clutch now for the second time, the discs worked fine, they really lasted with me for about 10,000km. Now I installed them for the second time and everything went without the slightest problem. (Psst. Make sure that for your motorcycle you don't need any specialized key in the motorcycle manual and check how many discs are needed for your motorcycle, in my honda - 5)

Review translated automatically

Reliable opinion

2017-12-19, 10:10

View original

Tomasz

Honda CBR 125 year of production: 2005 DID drive kit, is a set of drive sprockets and chain. The chain is packaged disassembled, which makes installation very easy (chain clasp and connecting link is also included). The assembly goes smoothly, the parts are marked with the same symbols as factory assembled, this confirms the originality of the offered product. Recommended!

Review translated automatically

Reliable opinion

2020-09-26, 10:01

View original

Jacek

I have a 2003 Honda XR 125 L. I am replacing the clutch for the second time (after 10,000km) with hard off-road and city riding. Metal discs passed the test that's why I buy them for the second time. Installation without a problem, but remember the specialized keys for your motorcycle, and the clutch cover gasket.

Review translated automatically

Reliable opinion

2018-05-22, 07:38

View original

Grzegorz

CBR 125R JC39 2007. Kit as described. I received a chain with a clasp which definitely simplified the installation. Each element of the kit foiled by the manufacturer. The product gives the impression of being solid. I also recommend to buy in addition: 1. cleaner to get rid of dirt accumulated at the front sprocket mounting point, I used chain cleaner 2. rear brake pads - once you remove the wheel to replace the rear sprocket, replacing the pads becomes child's play

Review translated automatically

Reliable opinion

2023-07-12, 12:24

View original

Dawid

Honda CBR 125 2008 The quality of workmanship in relation to the price deserves a big plus. The gears are durable, precisely made and provide smooth transmission. The chain provides thousands of kilometers of mileage. Nevertheless, the final evaluation of the drive set depends on individual preferences and riding style, in my opinion, I consider the drive set consisting of the DID brand drive chain and sprockets to be a solid and recommendable choice.

Review translated automatically

Reliable opinion

2022-09-28, 18:40

View original

Stanisław

Honda NTV 650 Revere 97r. Kit well made, good quality parts, easy installation good fit. Replaces the original parts well, the pump works flawlessly. I would like to add that the kit was purchased on the recommendation of a Honda service employee because the original repair kit costs almost 4 times as much, and this one does its job 100%. I sincerely recommend.

Review translated automatically

Reliable opinion

2025-08-03, 20:59

View original

Aksel

Have used these gaskets for the valve cover screws and they do exactly what they are supposed to. They seal tight, keep oil in and seem like a definite improvement over worn original gaskets. Installation was easy and the material feels both resilient and durable. No signs of oil sweat after installation - completely satisfied!

Review translated automatically

Reliable opinion

2020-08-07, 09:17

View original

Piotr

The kit fits perfectly for honda cbr 125 jc39 vintage 2007.All the information in the description agrees. Despite the low price that convinced me to buy the parts are made with perfect precision and durable plastic. The course of the exchange course quickly and successfully. I heartily recommend this product.

Review translated automatically

Reliable opinion

2019-04-28, 16:47

View original

Zuzanna

I own a 2004 Honda CBR 125 R motorcycle. The installation of the chain and sprockets went quickly and without problems. Despite my earlier concerns about buying on the Internet, the drive kit came exactly as described by the manufacturer, in addition, intact and properly protected .I recommend.

Review translated automatically

Reliable opinion

2017-05-15, 22:44

View original

Maciej

Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone

Review translated automatically

Reliable opinion

2021-08-24, 09:31

View original

Sebastian

Sealers bought for Junak 123 (2015). The size identical appears on the original ones I changed. They fit perfectly and do their job (driven 1 kkm after replacement; I poured 150 ml of 10W lag oil into each lag).

Review translated automatically

Reliable opinion

2023-08-22, 15:56

View original

Kacper

I highly recommend this product the chain is solid JT sprockets very good, everything fitted very well to the Honda JC 34 2004r drives very well the chain resistant to any breakage very solid recommend.

Review translated automatically

Reliable opinion

2020-10-06, 06:56

View original

Mateusz

The gasket of very good quality fits my model perfectly. part of the exhaust no longer comes out sideways so that the sound of the exhaust system work and the correctness of operation is very good. Thank you and recommend

Review translated automatically

Reliable opinion

2020-04-14, 15:01

View original

Artur

Honda CBR 125r 2005 . I bought the drive kit because it was at a very affordable price . With the product I was not disappointed , everything fits nicely , the quality of materials satisfactory as for this price . I recommend to everyone.

Review translated automatically

Reliable opinion

2016-05-10, 07:37

View original

Dawid

MZ ETZ 150 1990. The chain fits my motorcycle perfectly, both in length and width. Credit is due for including a Polish manual with instructions on how to install the chain.

Review translated automatically

Reliable opinion

2018-11-23, 07:39

View original

Łukasz

The biggest minus for the shipping time. Zero information about the extension of the shipping time due to the lack of product ( one was for the other they waited for delivery)and I waited 5 days for the package by courier. Product ok.

Review translated automatically

Reliable opinion

2025-03-12, 05:08

View original

Lukáš

After rebuilding my engine (honda cbr 125r j39) I replaced the original gasket with this one, and so far great satisfaction. Everything is as it should be, and I have to appreciate the safe packaging.

Review translated automatically

Reliable opinion

2021-10-03, 18:05

View original

Kasjan

I own a motorcycle Junak 905 capacity 50ccm the installation went perfectly. The chain itself came very quickly and was very well lubricated and prepared for installation.

Review translated automatically

Reliable opinion

2019-04-08, 13:33

View original

Michał

Teeth quality super, the chain could be a little shorter, but I 100% recommend. I have a 2005 Honda CBR 125R and the kit fits perfectly. Easy to install. I recommend

Review translated automatically

Reliable opinion

2019-04-08, 13:32

View original

Michał

Teeth quality super, the chain could be a little shorter, but I 100% recommend. I have a 2005 Honda CBR 125R and the kit fits perfectly. Easy to install. I recommend

Review translated automatically

Reliable opinion

2019-12-28, 20:49

View original

Norbas

Valve the same as the original which had probably enough. Fitted perfectly and works perfectly on the motorcycle, overall the store has bdb parts so I will be back!

Review translated automatically

Reliable opinion

2025-07-16, 06:39

View original

Alexander

Easy to order, fast delivery. Fits exactly. I fitted the oil seals straight away and passed the TÜV. Would buy them from G-Moto again next time.

Review translated automatically

Reliable opinion

2020-05-13, 06:44

View original

Damian

Honda VTX 1300 2006. The master cylinder was reconditioned with the kit purchased. Fast, efficient. High quality goods. The pump works like new.

Review translated automatically

Reliable opinion

2016-08-04, 12:15

View original

Damian

Honda CBR 125R 2007r injection. Good drive kit, top quality, no imperfections of any kind. Well matched drive kit for this model of motorcycle.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2025-07-22, 11:06

View original

Stefanos

On CBF 500A applied correctly to the radiator and it works just like the factory switch. It also seals as it should and there are no leaks.

Review translated automatically

Reliable opinion

2022-01-07, 12:16

View original

Oliwier

Honda CBR 125r jc50 2011 year the filter is of good quality I change it every season and have nothing to complain about everything fits as it should I recommend.

Review translated automatically

Reliable opinion

2020-07-22, 15:48

View original

Paweł

The sprocket fits perfectly, looks like the original and for that you can choose how many teeth. From the first impression it looks strong so 5 stars ;)

Review translated automatically

Reliable opinion

2017-07-07, 10:12

View original

Slabdoor

Zumico GR500 It's a pity that in the picture there are still dust seals but otherwise ok After all, for such a price they must meet my requirements

Review translated automatically

Reliable opinion

2020-07-19, 10:54

View original

Dominik

Chain for quiet riding(125cc) as much as possible I recommend of course with proper maintenance (I ride regardless of weather conditions)

Review translated automatically

Reliable opinion

2017-04-04, 23:05

View original

Piotr

Honda transalp 600v,1995. Universal kit , well fitted , works flawlessly. Quality of materials at a high level. I recommend .

Review translated automatically

Reliable opinion

2020-05-12, 08:21

View original

Bartek

Honda Varadero 125 2001r fitting and installation seamless. The gasket does its job, no blowouts on the exhaust manifold.

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2025-01-15, 05:37

View original

Ondrej

Bearings to the shock absorbers beautifully for the fit it works and the shock absorbers move beautifully fit there without any no its a problem for me good

Review translated automatically

Reliable opinion

2024-11-23, 10:18

View original

Jan

Bought for 1982 Honda CB 750 Custom. Occasionally some of the carburetor leaks, but so far it's holding up well. We'll see how long it lasts ?

Review translated automatically

Reliable opinion

2019-01-20, 21:50

View original

Adrian

Honda cbr 125 2004. gasket made of a soft sheet metal. Well cut holes. As for the quality of the product, I have no reservations.

Review translated automatically

Reliable opinion

2020-03-27, 07:47

View original

Mirosław

Honda Shadow VT600 1994. The rubber is not yet attached but, it should fit. the workmanship of these is of a high standard.

Review translated automatically

Reliable opinion

2024-05-02, 18:50

View original

Rafał

Recommended. Great quality. Perfect fit. No blowouts from the exhaust manifold and no more exhaust marks.

Review translated automatically

Reliable opinion

2024-05-02, 18:53

View original

Rafał

Product in accordance with the application. Fits perfectly. The quality of the filter bdb. I have been using this brand for many years and stay with it.

Review translated automatically

Reliable opinion